CERTAIN REV AND SPECIAL REPAIR WORKS UNDER ZONE-II AREA AT JAIPUR MIL STN

Amount

Excavating over areas, n exc 1.5m deep and getting out in soft loose soil

Excavating over areas, exc 1.5m and not exceeding 3.0.m deep and getting out in soft loose soil

Excavating over areas, exc 3.0m and not exceeding 4.50.m deep and getting out in soft loose soil

Excavating over areas, exc 4.5m and not exceeding 6.00.m deep and getting out in soft loose soil

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil

Excavating in trenches, n exc 1.5m wide and exc 1.5m in depth and not exceeding 3.00 m; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil

Excavating in trenches, n exc 1.5m wide and exc 3 m in depth and not exceeding 4.50 m; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil

Removal of surplus spoil upto a distance n. exc 50 M

Removal of surplus spoil upto a distance Exc 250 m but not exceeding 500 M and depositing where directed

Returing and filling in layers nexc 25 cm incl watering aand well running

M&L Cement concrete in foundations, filling and mass-concrete in PCC 1:4:8 Type D-2 (using 40 mm graded stone aggregate).

M&L Walling of random rubble, uncoursed, well bonded, brought upto couurses in cement mortar 1:6 dia not escceding 6.0m

M&LWalling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work brought upto courses dia not exceeding 6.0m

M&L Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work not exc 10cm

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work exc 10cm but not exceeding 20 cm

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)

M&L RCC M25 (20 mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span

M&L RCC M25 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L mild steel bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to TMT bars

M&L mild steel bars 6-8 mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to TMT bars in stirrups ,spacers and binders

All as per item No 21 but for 5mm dia and over upto and incl 10mm dia in stirrups spacers and binders.

S&F 100 mm dia sand cast iron soil waste and vent pipe in any length with or without ears and with cement joint fix to wall with clamps all as directed. .

S&F 100mm Cast iron cowls

Cutting into existing manholes for connecting new drains 150 mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required

Cutting into existing manholes for connecting new drains 200 mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required

M&L Concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8)

M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in benching including necessary form work all as directed and specified

M&L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for manhole cover slab set in cement mortar 1:6 including necessary form work. Note :- ( Reinforcement shall be measured and paid for separately.

Slat-glazed stoneware drain pipes laid in trenches and jointed in cement as specfified dia of pipe 150 mm

M & L Brickwork old size brick with fly ash bricks, traight or curved on plan exc 6m mean radius, built in CM 1:4

M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm to serial item no 16Note :- This item is for adjustment of rate only

M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) mixed with water proofing compound 3% by weight of cement finished even and smooth without using extra cement ( water proofing compound shall be measured and paid separately)

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4)

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4)

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6)

Supplying only Integral waterproofing compound

M&L Precast cement concrete type M-25 using 20 mm graded aggregate set in CM(1:4) in cover slabs (for manholes etc.) (Reinforcement shall be measured & paid for separately)

Demolition of brick work or stone/bolder masonry built in cement mortar or cement lime mortar and removal of debris from Outsite of MD land .

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as directed.

All as per item no. 42 Above but reinforced concrete.

Dismantling, floor, hearth or wall tiling of any description including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exc 1.00 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match set over and including 15mm thick screed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match Light Shade (As in vertical surfaces all as approved by Engr in charge)

M&L vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exc 1.00 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match.set over and including 15mm thick screed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match DARK Shade (As in floor all as approved by Engr in charge)

M&L glazed ceramic coloured tiles ( 450 x 300 mm) x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps ,wall etc set over and incl 10 mm thick cement plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set over and incl 15mm thick screed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Glazed ceramic coloured tiles in designer digital series on vertical surfaces of size 600x300x7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in CM (1:4) complete

S&F Vitreous China EWC (Wall hung) snow white colour of size 550 mm x 367 mm x 365 mm (Cat Part No 2085 of CERA), with soft close seat cover (Cat Part No 2385 of CERA), concealed cistern and knob (Cat Part No 2620 of CERA) etc complete all as specified and directed.

S&F Vitreous China snow white wash basin, Cyress pattern size 655 mm x 550 mm with pedestal , 32 mm dia CP waste coupling & 25 mm dia, 75 cm long PVC waste pipe with 32 mm dia connector of make Cera Cat Part No 1071 & 1171 or equivalent

S&F toilet paper holder Make Cera Cat Part No CA 106 or equivalent of Jaquar.

S&F fancy type Health faucet 15 mm bore (ISI marked) including extension Pipe of 1 Mtr Long Make -CERA Cat Part No CG 105A or equivalent.

S&F Jet suitable for EWC with 01 meter pipe of make Jaquar or equivalent

S&F central hole wash basin mixer 15mm dia with 450mm braided connection pipe of make Cera Cat Part No QQT-7001B or equivalent of Jaquar

S&F wall mixer valve 15mm dia of make Cera Cat Part No QQT-7219 or equivalent of Jaquar

S&F CP brass Towel ring Make - CA 102 of CERA or equivalent of Jaquar.

S&F soap tray chromium plated complete all as specified & as directed. Make - CERA Cat Part No CA 606 or equivalent of Jaquar.

S&F corner glass shelf large 300mm x 300mm complete all as specified. Make - CERA Cat Part No CA 503 or equivalent of GESIGN.

S&F 15mm bore bib tap two way, cast copper alloy chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule. Make - Cera Cat Part No QQT-7041 or equivalent of Jaqua

S&F 15mm bore CP angle valve cast copper alloy screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union. Make – Cera Cat Part No QQT-7053 or equivalent of Jaquar.

S&F of brass CP Magazine holder complete all as specified

PVC Grating doom 100 mm dia

PVC Grating doom 125 mm dia with waste hole

PVC (SWC) floor trap, with grating including jointing with solvent cement fixed in repair 75 mm bore

S&F salt glazed stone ware gully traps square or round mounted type – P of size 150 x 150mm

S & f rain shower of size 300x300 of make Jaguaar and equivalent fancy type complete all as specified and directed

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends swan neck etc.

PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floors dia of pipe 100 mm fixed in repair

PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floors dia of pipe 75 mm fixed in repair as required.

PVC (SWR) pipes single socketed in any length with rubber ring joints ficxed to walls dia of pipe 100 mm fixed as required

PVC (SWR) pipes single socketed in any length with rubber ring joints, lafixed to wall dia of pipe 75 mm fixed in repair as required.

Demolition and breaking up drain pipes of 150mm bore (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar

Demolition and breaking up drain pipes of 200mm bore (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar

Reinforced concrete pipes of 200mm bore, class NP2, laid and jointed complete with collar as specified

M&L cement concrete 1:4:8 type D2 using 40mm graded stone aggregate to bed concrete to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm dia pipe

M&L cement concrete 1:4:8 type D2 using 40mm graded stone aggregate to bed concrete to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia pipe

S&F in repair PVC Bends 100/110mm bore, with oval access doors

S&F in repair PVC Bends 75 mm bore, with oval access doors

S&F in repair PVC Bends 100/110mm bore, any radius

S&F in repair PVC Bends 75 mm bore,any radius

S&F PVC vent cowls 100 mm

S&F PVC vent cowls 75 mm

S&F PVC (SWR) junction single, (Single T) equal or unequal of 75mm bore of pipe

S&F PVC (SWR) junction single, (Single T) equal or unequal of 110mm bore of pipe

S&F PVC (SWR) junction double, (Double T) equal or unequal of 110mm bore of pipe

PVC (SWR) junction single, (Double T) equal or unequal of 75mm bore of pipe

M & L for Brickwork with flyash bricks, straight or curved on plan to any radius i n half brick thick walls, built in CM 1:4 complete

S&F aluminium sliding door,sliding windows,partition,door, windows etc including necessary fittings,rubber beading, clips etc complete all as required.

M&L 5.0 mm thick plain glass packing with rubber gasket, Al beading etc around both sides for fixing of glass all as specified and directed.

M&L 20 mm thick Granite stone (table rubbed & polished) in steps, shelves, jambs & window cills/kitchen platform incl bedded & jointed with grey cement slurry & pointing in white cement using marble dust with admixture of pigment to match with marble shade of Granite stone & incl grinding & polishing the exposed edges over and incl 15mm thick screed bed in CM 1:4.

M&L two coat of Oil bound distemper on ceiling surface including preparation of newly plaster surface complete all as directed.

S&F Bib taps fancy type cromium plated long body elbow operated cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule,long body,15 mm

S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes pipes , including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm bowl size 410mm X 330mm X 160mm complete all as directed.

S&F tubular towel rail 20mm dia, D type, 60cm long between flanges,brass CP

M&L for GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and incl 15 mm cement plaster in 1:6 jointed with ditto

S&F in repairs stainless steel plate rack 900mm x900mm x225mm of approved quality made of 1 thick sheet all as directed.

Surface excavation n.exc. (not exceeding )3 cm deep and averaging 15 deep and getting out in soils all as directed.

Treating the backfill in contact with foundation at the rate of 7.5 liers of emulsion per square metre of vertical surface (Area of the substructure in contact with back fill to be measured

Treating the top surface of filled earth at the rate of 5 liters of emulsion per square metre of surface

Treating the soil under plinth protection at the rate of 5 litres of emulstion per square metre of surface area

Treating the soil alonwith external perimeter of building at the rate of 2.25 litre of emulsion per meter of the permeter wall

Removing excavated material exc. 250m but in exx. 500m and depositing wehre directed

M&L rendering 15 mm thick on other than fair faces of brick work or stone masonry surfaces in CM 1:4 finished even and smooth without using extra cement

M&L Rolled sections as in main and cross beams hip and jack rafters: purlins where connected to common fafters and running rails and guides for slliding doors, fixed with angle cleats or other connecting plates.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Preparation of new steel & iron surfaces & applying two coats of synthetic enamel paint over 10 cm width or girth etc.

M&L two coat of weather proof paint over a coat of primer including preparation of newly plaster surface over one coat of external putty.

M&L two coat of Oil bound distemper on wall surface including preparation of newly plaster surface over one coat of primer including one coat of putty.

M&L 75mm of thick PCC (1:3:6) type C-2 as in plinth protection

M&L cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in bed blocks, copng etc including necessary form work and all as specified

S&F powder coating anodised aluminium work for doors, windows ventilators, grills with one or more rebates including joining cleat for fixing etc. including hinges complete all as specified .

M&L 12 mm thick MDG Board both side choice lamination fixed in aluminimum doors/partition

S&F aluminium anodised, barrel, tower bolts of extruded section and fixed length of bolt 100 mm

S&F Extruded aluminium alloy handles, fabricated types, anodised size of handle 100mm

M&L for 75 mm thick PCC (1:3:6) type C-2 as in sub base of floor

M&L for vetrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colured cement to match, set over & including 15 mm thick screed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match light shade

M&L for Anodised aluminium snap grid frame work for false ceiling with perforated particle board/tiles for unsula-tion and accoustic purposes, 60x60 cm in size fixed, with nails to timber frame work or with staples, on snap grid fixed on slop/flat ceiling

M&L for Mild steel sheet eaves gutters, galvanised 1.25 mm thick class3, half round with rounded edges including fixing with flate iron bracke complete.

Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 for dia of pipe

Ditto as per item No 122 above but 75mm dia of pipe.

Cutting holes into or through one brick thick wall in superficial area 150 sq cm built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar and removal of same from outside MOD land complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and removal of same from outside MOD land complete all as specified and as directed by Engineer-in-Charge.

M&L 75mm thick cement concrete type D-2, 1:4:8 all as directed.

M & L machine pressed rubber moulded precast concrete inter locking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade, with grey cement and no pigment laid over and including 25 mm thick sand cushion and joints of interlocking tiles filled with dry sand and compacted with mechanical plate vibratore complete all as specified and directed

S&F Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern ), including provision of lime concrete bedding making good to disturve surfaces bedding fixed in repair including P or S and low lvel flushind cistern trap all as specified.

M&L for P U Coated Chequered cement concrete designer tiles 25 x 25 x 25mm thick set in CM 1:4, 15mm thick jointed and pointed in neat cement slurry as in floors/ steps/ skirting etc complete all as directed by Engineer-in-charge.

Cleaning of drain pipes by rodding from manholes by mechanically or manually all as directed by Engr-in-charge and or cleaning eye incl well flushing and placing back manholes, covers after cleaning fro 150 mm bore.

Cleaning of drain pipes by rodding from manholes by mechanically or manually all as directed by Engr-in-charge and or cleaning eye incl well flushing and placing back manholes, covers after cleaning fro 200 mm bore.

Bailing out water from manholes manually and mechanically and mechanically & taking out foreign material and removing same from MD lands incl taking out manholes covers and replacing manholes covers in position for manholes of any size & depth all as specified

Providing and fixing at all height false ceiling of 12mm thick tapered edge gypsum board conforming to IS-2095 including S&F of frame work made of special section power pressed from MS sheet and glavanised in accordance with zinc coating and consisting of angle clamps of size 22mm wide 1.6 mm thick with flange of 22mm and 37mm at 1200mm c/c including jointing and fixing to a flush and square edge of the Gypsum board with recommended filler tapper taps finisher and two coats of plastic emulsion paint over one coat of primer suitable for gypsum board and also including the cost of making opening for light fittings grills and cutout made with frame of parameter channels suitably fixed all as directed by Engineer-in Charge.

S&F modular switch one way 6 amp 1 module all as per Legrand Mylinc cat ref No 675501 or equivalent in Schneider Zencelo or carbtree Murano as approved.

S&F modular switch one way 16 amp 1 module all as per Legrand Mylinc cat ref No 675511 or equivalent in Schneider Zencelo or carbtree Murano as approved.

S&F modular socket 6/16 - 2/3 pin combined 2 module all as per Legrand Mylinc cat ref No 675555 or equivalent in Schneider Zencelo or Carbtree Murano as approved.

S&F modular socket 6 amp 2/3 pin combined 2 module all as per Legrand Mylinc cat ref No 675550 or equivalent in Schneider Zencelo or Carbtree Murano as approved.

S&F modular hum free electronic step fan regulatero, 100 watt 2 module all as per legrand cat ref no 675530 or equivalent in schneider Zencelo or Crabtree Murono as approved

S&F ceiling rose 3 plates polycarbonate body complete

M&L for submain wiring alongwith earth 2x6 sqmm+1x6 sqmm eath wire in 22mm dia conduit continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit , medium grade, ISI marked ivory colour

S&F power unit for AC or geyser 3.5 KW 4 module including sunken modular GI metal boxes not less than 1.2 mm thick and white modular mounting plates with frame all as per legrand Mylinc cat ref no 675558, 689009, 675564 & 675584 or eqivalent in schneider Zencelo or Crabtree Murano as approved.

S&F MCB distribution board, SPN, 415 Volts, 4ways powder coated, CRCA steel sheet, degree of protection IP 43-IK 09 with reversible double door, recess mounted, having insulted 100amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing conneciton, blanking plates in unused spaces as required.

Supply & Fix fans ceiling complete with electronic regulator and down rod of 4 fit including all accessores 230 V, 1200mm sweep, BEE star rated.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conduictor cable 1.5 sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 sqmm (green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and suinken mopdular GI metal boses not less than 1.00 mm thick and white modular mounting cover plates with frame for mounting modular switches, sockets, fan regulators etc as reuqired one light point controlled by one switch

All as per item no 145 but one fan point controlled by one switch

All as per item no 145 but one socket outlet 6 amp controlled by one switch on the same board with other switches

All as per item no 145 but one socket outlet 6 amp controlled by one switch on the independent board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metalic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fitting/fixing accessories and sunken modular GI metal boxes not less than 1.00 mm thick and white modular mounting plates with frame for mounting modular switches, sockets as required for 3 pin 16 amps socket outlet point controlled by one switch.

Single pole 6 to 32 amp Make -Legrand cat ref no 408587 to 408595 or equivalent in schneider or Hager as approved

Double pole 10 to 32 amp make-Legrand cat ref no 408631 to 408636 or equivalent in schneider or Hager as approved Note_for MCBs & MCB DBs:- MCCBs, MCBs & MCB DBs shall be of the same make

Supplying and fixing in repairs energy efficent recessed mounted LED luminaire suitalbe for 2;x2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current clectronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core

Sh Manoj Nagar

M/S Mohan Lal Gupta

Smita Constructions

J.J.ENGINEERING

S.R.Enterprises