Chain link Fencing work at Nyoma Community plantation area of Nyoma Forest Range

Amount

Earth work in excavation over area exceeding 30cm in depth as well as 10sqm on plane including disposal of excavated earth and lift up to 1.5 m disposal of earth to be leveled and neatly dressed. 320×0.45cmx.0.45cm×0.45cm= 20.95cum

Providing and laying in position cement concrete of specified grade including of centering and shuttering all work up to plinth level 1:3:6 (1 cement 3 fine sand 6 graded stone agg. 20mm nominal size) 1. crushed 320×0.45cmx.0.45cm×0.45cm= 20.95cum

Providing and fixing of fabricated angle iron fence post made of standard angle section 2.14 mtrs long with 15cm foot /toe at bottom with holes drilled and top bend (50mmx50mmx6mm)320

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns 30x4x0.45m=54.00sqm Providing and fixing of G.I chain link fabric fencing cold dip galvanized of required width in mesh size 100x100mm including strengthening /binding with 2mmdia G.I wire or nut bolts and washer as required complete as per the direction of the in charge 975mtrs x1.52mtrs height (1152kgs)

Providing and fixing of G.I chain link fabric fencing cold dip galvanized of required width in mesh size 100x100mm including strengthening/binding with 2mm-dia. G.I wire or nut bolts and wahser as required complete as per the direction of the incharge.

Supply at site angle iron posts and strand of required size including bottom to be split and bend at triangle in opposition direction of 10cm length and drill hook upto 10mm diaetc of all complete job. Flat 40mmx6mm 1x320x 5’.0”= 1600.00rfts or 487.80 RM @ 1.87kg/m =912.18kgs

Steel work in built up tubular round square or rectangular including cutting, hoisting , fixing in position and applying of one priming coat of approved steel primer including welding and bolting with special shaped washers etc including Hot finished welded type tubes. 4” dia NB medium. Entrance gate = 5.6x12’.00”= 66.00rfts or 20.12RM @12.2kg/m= 245.46kgs @Rs 110/kg

Providing ad fixing of mild steel door bolts with holding ad complete job.

Carriage of construction material by M.T as under:- a)Mechanical carriage of cement and fencing materials from sources to Nyoma( Avg distance of 180 kms) (128 bags x50=6400kgs) (Iron angle x320x9.60=3072kgs (Iron flat 320 x3.33=1065.6kgs (chain link 128 x24= 3072kgs ) (entrance gate x245.46kgs)

b) Sand/stone agg. Avg. (Lead 10km) 39.65cum

Cost and installation of one sign board with sizing (6’.00”x4’.00”) With 4’.00” leg including writing etc

LADAKH STEEL INDUSTRY

Aggxima Entrprise