REPAIR TO EXTERNAL PLASTERING, PLUMBING, JOINERY, PERIODICAL SERVICES AND INTERNAL ELECTRIFICATION AT A ZONE AND B ZONE UNDER AGE B/R-I OF GE BENGDUBI

Amount

SCHEDULE 'A'

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate in flooring complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate, 50mm thick in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 75mm thick 1:4:8 type D2 using 40mm graded crushed stone aggregate as in floor, path etc, finishing the surface rough to receive tilies complete all as specified and directed.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick in floors over and including 20 mm thick screed bed cement mortar 1:6 set and jointed in neat cement slurry and pointed with colour to match the tiles complete all as specified and directed.

M&L for providing Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid on 25mm thick layer of sand well watered & rammed and jointed and pointed with grey cement and pigment complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic tiles joint free coloured tiles 7mm to 8mm area exceeding 0.06 sqm but n.exc 0.11 sqm on floors over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

M&L for non skid ceramic tiles joint free coloured tiles 7mm to 8mm area exceeding 0.11sqm but n.exc 0.18 sqm on floors over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles joint free coloured 450x300mm size 7mm thick on walls over and including 10mm thick plastering in cement mortar (1:4) set and jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

Ditto all as item No 10.00 above but on vertical surfaces over and including 10 mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for Vitrified ceramic tiles light shade 10 mm thick ( square / rectangular) polished, area of each tiles n.exc 0.36 Sqm, in floor etc. including 20mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

Demolition of brick work built in cement mortar all as specified and directed.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster of any description in any position incl racking out joints hacking for key, scrubbing down with water etc and removal of debris from site all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on fair faces of brick work wall, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair faces surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5 mm thick in cement mortar 1:3 over/soffit of chajja, ceiling finished surface even and smooth without using extra cement all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer even and smooth complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper on wall even and smooth over and smooth appying with 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat white wash complete all as specified and directed

Dismantling of stone slab and tiles of any description or thickness in cooking platform laid bedded and pointed in any mortar.

M&L for machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including including rubbing and polishing complete all as specified and directed.

Ditto as above item no 24.00 but in skirting on backing coat of cement mortar 1:4.

M&L Granite (of any type) work (table rubbed and polished) slab 20 mm thick machine cut bedded and jointed with grey cement and pointed with white cement and adhesive of pigment to match the shade including cutting and polishing complete all as specified and directed.

Dismentling plain or corrugated Prepainted sheeting, any gauge, thickness in roof coverings.

S&F Pre-painted galvalume aluminium Zink coating GI based corrugated steel sheet thickness in between 0.4mm to 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / Cladding to wall / ridges etc fixed with self tapping screws complete all as specified and directed.

S&F of thickness 0.56mm Plain, Aluminium sheeting, alloy as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

S &F galvanised, corrugated mild steel sheeting of thickness 0.63mm with two corrugation side lap fixed with L type or J type or cranked hook bolts and screws with washers in roofs, walls etc with grade of zine coating 275 complete all as specified and directed.

Dismantling structural steel work including doors, gates, welded fabricks & framed truss etc. complete all as specified and directed.

S&F angle iron, MS tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat, MS plate etc including necessary welding, fittings etc complete all as specified and directed.

M&L preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness size quality and discription) for metal frame including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed.

S&F figured glass pin head type 3mm thick and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.

M & L for 3 mm thick sheet froasted glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane complete all as specified and directed.

S & F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of apertune 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading complete all as specified and directed.

S&F 2nd class hard wood plain fillets square or rectangular in section wrought of cross sectional area exc. 13 Sqcm but not exc. 25 Sqcm secured with nails or screws fix with old window frame complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) area not exc. 1.5 sqm complete all as specified and directed.

Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and removing form site of work complete all as specified and directed.

S&F Pressed steel door frame of size 105 x 65mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc, complete all as specified and directed.

S&F Pressed steel frames frame size 165X60mm for doors with one or moe rebates including necessory fixing lugs, hinges, lock strike plates etc, complete all as specified and directed.

S&F of 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick plain framed, panelled shutter with lock rail and panel of 9mm B.W.P. commercial ply,The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 30 mm thick door/window shutters open rebated and prepared to receive glass, gauze etc with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed..

S&F in repairs steel windows with side hung shutters including projection type hinghs with steel handle, and steel pag stay, complete with guard bars, dovetailed or welder complete all as specified and directed.

S&F in repairs steel windows with side hung double shutter (one for glazing and other for mosquite proofing) including projection type hinghs with steel handle, and steel pag stay, complete with guard bars, dovetailed or welder all as specified.

S&F in repairs steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading complete all as specified and directed.

M&L for 4 mm thick sheet plain glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane complete all as specified and directed.

M&L for 4 mm thick sheet plain glass ordinary quality and glazing with oil putty or wooden beads in squares exc 0.50 sqm in each pane complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes at top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC sheet channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling plain colour PVC sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

S&F mild steel sliding door bolts liding door bolts plate type 300mm bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts complete all as specified and directed.

S&F stainless steel butt hinges medium weight 100mm in size for doors complete all as specified and directed.

S&F 150 mm aluminium anodised barrel tower bolt extruded section for doors.

S&F 150 mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed length og bolt 150 mm complete all as specified and directed

S&F mild steel pressed handles size 150 mm, oval type, stove enamelled black complete all as specified and directed.

S&F floor door stopper of brass body and tongue with rubber shoesover all length of cover plate 140 mm complete all as specified and directed.

S&F stainless steel 20 mm dia curtain rod with fancy type SS bracket and hooks complete all complete as directed.

Dismantling of existing AC sheet ceiling board all as directed.

S& F suspended false ceiling using anodised GI Exposed ceiling suspension system perimeters channel 0.55mm thick having web of 27mm and flange of 30mm on one end 20mm on other and fixed to wall with the help of nylon sleeves and providing fixing Gypsum board 12mm thick in ceiling fixed with screw and GI frame and finished surface and finishing surface attachment and finnaly board have tobe jointed and finished look with POP to have a flush look using jointed compound/tape painting etc complete all as specified as directed.

M&L for pop border of approved design completed all as specified and directed.

S&F Aluminium anodised snap grid frame work as in false ceiling all as specifed size of gird 605x 605mm with aluminum main T sections of size 36.5 x 23.5x1.6 mm and cross T of size 23.5x23.8x1x1.6mm with aluminium wall angle of size 36.5x23.5x1.6mm including GI supporting wire of 4mm dia or hanging from roof truss etc complete all as specifed and as directed.

S&F 4 mm thick Non asbestos AC sheet plaint building boards fixed to timber frame work with screw in ceiling all as specified.

M&L for two coats of synthetic enamel paint over acoat of pink including preparation of new surface of ceiling complete all as specified and directed.

Dismantling PVC water tanks 500 litres capacity all as directed.

S&F rotational moulded polyethene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed.

S&F in repair 15 mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as specified.

S&F in repair 20mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as specified.

S&F 20 mm bore ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Taking down steel tubing and connection 15mm bore complete all as specified and directed.

Taking down steel tubing and connection 20mm bore complete all as specified and directed.

Taking down steel tubing and connection 25mm bore complete all as specified and directed.

S&F G I tubing medium grade, bore of tube 15 mm (ISI Marked) with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed.

S&F G I tubing medium grade, bore of tube 20 mm (ISI Marked) with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed.

S&F G I tubing medium grade, bore of tube 25 mm (ISI Marked) with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed.

Cutting, chases, pinning in, block masonry wall for concealed water tubing and making good to facing and pointing in cement mortar 1:3, cutting n. exc. 10 cm girth all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

S&F in repairs Bib tap 15 mm CP with crutch or butterfly handle screwed down srewed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 600mm long between flanges complete all as specified.

S&F Grating doom 100 mm dia with waste hole of PTMT (Minimum weight 140gms) complete all as specified.

S & F in repairs CP brass shower rose 125 mm dia with or without swivel joints, including fixing to steel pipe or union complete all as specified.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S & F in repairs 10 lits capacity PVC flushing cistern low level, white, with inlet, ball valve, float and handle flush pipe including brackets etc complete all as specified and directed.

S&F 15mm dia angle stop valve cast copper alloy with fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fixed to iron pipe all as specified and directed.

S&F vitreous china wash hand basin in repair flat back type 550x400 mm including fancy type Pillar taps including PVC waste pipe, PVC connetion and waste coupling complete all as specified and directed. Make-Hindware, CERA

S&F in repair pillar taps, 15mm bore fancy type, cast copper alloy with capston heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F 15mm dia PVC connector with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs water closet (Squat Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair wash down water closet vitreous china pan pedestal pattern white including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F Vitrious china urinals bowl type (Back or corner wall type ) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement with brackets, flush pipes, grating and union for discharge pipe etc complete all as specified and directed.

S&F in repairs Kitchen Sink with drain board made of stainless steel, over all size 915mm x 460 mm and bowl size 410 mm x 330mm x160mm, 1mm thick with plugs washers and waste pipe incl bedding in CM to dwarf wall incl fitting cantilever brackets and connecting union to pipe complete all as specified and directed.

Demolition of reinforced concrete of any description all as directed.

M&L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in coverslab, landings, chajja etc complete all as specified and directed. (NOTE:- Reinforcement shall be measured and paid seperately).

M&L for TMT bars (Fe-500/ Fe-550D) 8 mm dia, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition and breaking up drain pipes 100 mm (Salt glazed ware, AC or Reinforced concrete) Set in cement Mortar all as directed.

M&L for concrete bed PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate to SWG drain pipe 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested including removal of debris outside MD land all as specified and directed.

S&F salt glazed stone ware drain pipe grade 'A' 100mm bore laid on concrete bed and jointed complete all as specified and directed

S&F looking mirror 450X600mm with plywood backing and aluminium frame all as specified and directed.

M&L SGSW gully trap square or round mouthed P type having size 150X150 mm fixed in position complete all as specified and directed.

Taking down 100mm CI soil/ A C rain water pipe, eves gutters pipes of any length any size including fittings and cutting of holes where ever required complete all as specified and directed.

S&F 100mm dia CI sand cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required complete all as specified and directed..

S&F 100mm dia CI bends including cutting of holes and making good complete all as specified and directed.

S&F CI single branch piece 100mm dia equal or unequal complete all as specified and directed.

S&F CI double branch piece 100mm dia equal or unequal complete all as specified and directed.

S&F CI floor trap in floors with grating including jionting to waste pipe of 100mm dia fixed in cement concrte type B1 (1:2:4) complete all as specified and directed.

S&F cast iron cowl 100 mm bore complete all as specified and directed.

Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed.

Supply and fix in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed.

S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and directed.

S&F in repairs PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified.

S&F in repairs PVC (SWR) Branch pieces, double (double Y )equal or unequal of pipe 110mm bore complete all as specified.

S&F PVC in repairs (SWR) Branch pieces, double (double Y )equal or unequal of pipe 110mm bore complete all as specified.

S&F in repairs PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4) and including water leak proof treatment complete all as spcified

S & F in repairs PVC connection pipe 600 mm long with two Nos CP nut threaded coupling for 15 mm dia pipe.complete all as specified and directed.

Taking down unservicable steel gate/shutter of any description of size exc 9 n. exc 12 sqm each including taking out of unservicable parts/portion by cutting and replacing with new one as per the existing size and specification and refixing in the same opening by maintaining proper alignment including repairing defective portion of gate/shutter, steel structurre to match with exsiting structure including necessory cutting, drilling, welding and reveting etc, greasing, oiling to movable parts including all necessory fittings and appying one coat of synthetic enamel paint over a coat of pink primer to new portion/structure complete all as specified and directed.

Cleaning and complete removal of all scales; and dirts, silts etc, from tank and from mouth of circulating pipes etc for capacity of tank 500 litre and 1000 litre including written as "Tank clean on DD-MM-YYYY" on the body of the tank with white paint complete all as directed.

M/S JANATA CONSTRUCTION

GURUNG CONSTRUCTION

BISWAJIT SAHA

M/S UTTAM ENTERPRISES