Providing additional link feeder-II newly established and Electrical work for Sannathupudukudi

Earth work excavation in all types of soil

PCC 1:3:6 using 40 mm metal

PCC 1:2:4 using 20 mm metal

PCC 1:2:4 using 20 mm metal with shuttering for muffing and coping

Transport and hoisting of suspension insulators of 7 units including cost of labour, lead, lift, T & P etc., complete

Transport and hoisting of tension insulators of 8 units including cost of labour, lead, lift, T & P etc., complete

Transport and stringing of Panther conductor, paying out, jointing, rough sagging, tensioning, clipping, providing vibration dambers for tension locations including giving jumber connection for power Conductor including transport charges, loading unloading lead, lift etc., complete. Single span 3 Wire

Transport and stringing of Panther conductor, paying out, jointing, rough sagging, tensioning, clipping, providing vibration dambers for tension locations including giving jumber connection for power Conductor including transport charges, loading unloading lead, lift etc., complete.

Supply and erection of 2 nos D.P

Providing Temporary guys

Supply of following materials ST fittings for Panther

Supply of following materials SS fittings for Panther

Supply of following materials SB Damper for Panther

Supply of following materials Aluminium Earth Bond

Supply of following materials 16mm dia D Shackle

Supply of following materials B.G. Clamp for Panther

Labour, machinery, Consumables for the Fabrication for steel structures Light section (below 14 kg/m)

Labour for the Erection of the Fabricated Steel Structures Light section (below 14 kg/m)

Labour, machinery, consumables for fabrication, erection of earrthmat, earth connection (including Green colour painting), earth electrode, earthspike (including sharpening of earth spike). As directed by the field engineer.

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder(Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer. (Earth to be supplied by the contractor).

Supply and providing of 450-600mm dia 300mm height 36mm thick cement collar with top cover for idrntification of earth electrode location as directed by the field Engineer

Labour for excavating and refilling of earth /trench for earthmat, cable, etc., of any size/depth narrow excavation as directed by the field engineer.Normal clay / hard gravel soil

Supply of paint of reputed make and Labour,consumables for first primer coat using red oxide Paint and first finish coat of Painting using Aluminium Paint including consumables, after proper surface preparation using appropriate machinery to remove rust/scales etc as directed by the field engineer .

Supply of paint of reputed make (ie Asian,Dulux,Nerolec paint) and Labour for Second coat of Painting using Aluminium paint including consumables.

Labour charges for writing details in any finished surface/board including cost of enamel paints and other consumables as directed by the field engineer.

Labour for erection of Breaker using crane arranged by the Contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes, gas filling wherever necessary as directed by the field engineer.110 KV Breaker

Labour for erection of Measurement transformers, reactor units, using Crane arranged by the Contractor including providing holes wherever required as directed by the field engineer.110 KV CT/CVT/ PT

Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer. 110 KV AB Switch with earth

Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer.110 KV AB Switch without earth

Labour for erection of LAS station/Distribution type single unit including monitors & accessories.110 KV LAS

Labour for the erection of Insulator single pole stack for supports Uprights / Underhang including Meggering & other consumables and as directed by the field engineer.110 KV .

Labour for the erection of Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer.75 mm (1 length)

Labour for the Erection of Jumper / Droppers using Moose / Zebra / panther Double Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer. ( extra 30% Under LC work)

Labour for the Erection of Control Panels includings consumables as directed by the field engineer.Double feeder Control / Relay Panels of grid type ( P& C)

Labour for erection of cable in duct/trench/clamping on structures - neat laying in the ducts with identification Tags,Plastic token in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer. Up to 8 Core

Labour for erection of cable in duct/trench/clamping on structures - neat laying in the ducts with identification Tags,Plastic token in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer. Above 8 Core

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.16/19mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer. 22/25 mm

Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer.(No.of core ends in unit of 1000).

Supply and Erection of 1x72W , 240V LED street light Aluminum case fitting Make-CGL / PHILIPS. (inclusive of all taxes).

Labour charges for laying of control/ yardlight cable by digging cable trench of size 0.3m x 0.6m filling with for a depth of 0.2m, covering with one layer of country bricks and refilling with excavated earth and including cost of sand and bricks,etc.

Fabrication, supply and fixing of C.T/P.T junction box of size 400x300x150 mm of 16 SWG(1.6mm) M.S.sheet with primer coat paint, Supply,Fabrication and erection of Box fixing Flats using 50x8 MSF, Supply and Fixing of 25x3mm² Braided Flexible Copper loops to box earth., Two coat of Enamel Paint, provision for fixing terminal blocks/MCBs including consumables, VAT, fright, etc., as directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements)

Fabrication,Supply and fixing of earth pit detail board including the cost of 20 SWG CR sheet,10mm RTS Rod, T & P, etc., compleate.

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 110KV Isolators

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation Cable/Conductors including cutting and rewinding

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation BusBars

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 110kv breaker

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 110KV CT/LAS/PT

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 110KV insulator

Supply and Fixing of Godrej 6lever navtol lock with triplicate keys for AB Switches and for any other purpose including the cost of ring and key token as directed by the fiels Engineer

Supply and fixing of key chain ,ring and identification key token for A.B Switches as directed by the field Engineer

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Switch End Clamp for Double Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Switch End Clamp for 75 Bus bar

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Reducer Clamp for 75mm Bus to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. 75mm Corona Bell

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. T clamp for zebra to zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. free end clamp for 75mm

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Switch end clamp for Panther

Supply of "B" class G.I.pipe for extension of tandem/down pipe for A.B.Switches and for any other work required as directed by the field engineer.40mm Dia

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete.65x 10 mm M.S.Flat

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 50x 8 mm M.S.Flat

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 100 x 50 mm M.S.Channel

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 65 x 65 x 6 mm M.S.Angle

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 50 x 50 x 6 mm M.S.Angle

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. MS Round 40mm dia

Supply and Provision of M8,M10,M12&M16 (full /Half thread) G.I Bolt and Nuts of Various Sizes including Plate /Spting washers as required and as directed by the field Engineer

Rubber mat of size 2000x1000x10mmThickness 0.10m

Supply of 220V DC Motor operated mechanism 110KV Ab Switch with earth and without earth including cost of materials .Loading transporting unloading delivery at sitre and labour charges for fabrication erection checking for all operatiopn Testing & Commissioning inclusive cost of all materials ,Labour ,lead ,lift and T& p etc., Complete

Fabrication, supply and fixing of AC junction box of size 535x310x127mm of 18 SWG M.S Sheet including HRC Fuse unit-18nos should be fitted with base, consumables, VAT, fright, etc., asTRANSCO standard and directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements)

Supply and Labour charges for fixing of 20 SWG CR Sheet (size of board 8' x 4') in Equipment Details board/Fire Stand roof including the cost of CR Sheet ,Red oxide Paint etc.,compleate.

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

Please Enable Macros to View BoQ information