Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC NEAR PROTHRAPUR COMMUNITY HALL PAHARGAON GARACHARMA POST SRI VIJAYA PURAM 744105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹18.3 L+₹2.4 L (15.2%)Rejected-Finance 1 209 FIRST FLOOR SADAR BAZAR DELHI CANTT 1 209 FIRST FLOOR DELHI CANTT VASANT KUNJ SOUTH WEST DELHI DELHI 110010 | NEW DELHI | DELHI | 110010 | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹20.2 L+₹4.3 L (27.3%)Rejected-Finance 10 WARD NO 18 PLOT NO 34 KAMDENU FURNTIURE SIKAR RAJASTHAN 332025 | SIKAR | RAJASTHAN | 332025 | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹20.7 L+₹4.8 L (30.5%)Rejected-Finance 441 G F LIG FLATS PH 2 SEC 14 PKT 3 DWARKA NEW DELHI SECTOR 14 DWARKA DWARKA SOUTH WEST DELHI DELHI 110078 | SOUTH WEST DELHI | DELHI | 110078 | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹20.9 L+₹5.0 L (31.3%)Rejected-Finance RZ A2 2 CHANAKYA PLACE PART I OPP C 1A BLOCK JANAK PURI NEW DELHI 110059 | NEW DELHI | WEST DELHI | DELHI | 110059 | L5 | Rejected-Finance Not Being L1 |
| Sl No | Description | Qty | Unit | RUCHIKA ENGG.WORKS L5 | SANJEEV ENTERPRISES L6 | innovision limited L2 | OMVIN ENTERPRISES LLP L4 | D K ENTERPRISES L1 | Ruchi enterprises L3 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S & F in replacement of surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser, IP40. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen/watt, PF ≥0.95. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed | 280 | Each | 649 ₹1,81,720 | 270 ₹75,600 | 275 ₹77,000 | 270 ₹75,600 | 240 ₹67,200 | 190 ₹53,200 Lowest |
| 2.00 | S & F in replacement of surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser, IP40. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 5000K, ≥ 110 lumen/watt, PF ≥0.95. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed | 90 | Each | 649 ₹58,410 | 270 ₹24,300 | 275 ₹24,750 | 270 ₹24,300 | 240 ₹21,600 | 190 ₹17,100 Lowest |
| 3.00 | S & F in replacement ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed. | 312 | Each | 1,062 ₹3,31,344 | 1,300 ₹4,05,600 | 800 ₹2,49,600 Lowest | 1,280 ₹3,99,360 | 1,200 ₹3,74,400 | 1,700 ₹5,30,400 |
| 4.00 | S & F in replacement ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 5000K, ≥ 110 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed. | 60 | Each | 1,062 ₹63,720 | 1,350 ₹81,000 | 850 ₹51,000 Lowest | 1,350 ₹81,000 | 1,200 ₹72,000 | 1,700 ₹1,02,000 |
| 5.00 | S & F in replacement ceiling recessed mounting LED SKY Lights luminaire, Printed Customised design (design as per approval by GE), 600 mm x 600 mm, (2' x2'), 36 Watts, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed. | 50 | Each | 1,740 ₹87,000 | 1,980 ₹99,000 | 800 ₹40,000 Lowest | 2,200 ₹1,10,000 | 1,800 ₹90,000 | 1,700 ₹85,000 |
| 6.00 | S & F in replacement Surface mounted LED Round light fitting 15 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 100 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed. | 300 | Each | 855 ₹2,56,500 | 920 ₹2,76,000 | 250 ₹75,000 Lowest | 1,150 ₹3,45,000 | 550 ₹1,65,000 | 700 ₹2,10,000 |
| 7.00 | S & F in replacement, Flush fitting LED Round light fitting 15 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 100 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed. | 90 | Each | 855 ₹76,950 | 920 ₹82,800 | 250 ₹22,500 Lowest | 1,050 ₹94,500 | 550 ₹49,500 | 600 ₹54,000 |
| 8.00 | S & F in replacement Surface mounted LED Round light fitting 20 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 100 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed. | 180 | Each | 962 ₹1,73,160 | 1,550 ₹2,79,000 | 225 ₹40,500 Lowest | 1,200 ₹2,16,000 | 592 ₹1,06,560 | 600 ₹1,08,000 |
| 9.00 | S & F in replacement, Flush fitting LED Round light fitting 20 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 100 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed. | 60 | Each | 962 ₹57,720 | 1,350 ₹81,000 | 225 ₹13,500 Lowest | 1,160 ₹69,600 | 592 ₹35,520 | 700 ₹42,000 |
| 10.00 | Taking down carefully unserviceable of aluminium point wiring complete except for ceiling or where not feasible fan / plug / bell but including fittings such as switches, ceiling rose, pendants, regulator etc. and making good disturbed surface to match with the existing surface of roof / wall / floor by applying putty and applying colour / white wash finish complete all as specified and directed. | 444 | Per Point | 2 ₹888 Lowest | 50 ₹22,200 | 2 ₹888 Lowest | 10 ₹4,440 | 5 ₹2,220 | 8 ₹3,552 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
27 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE E/M RR HOSP. DELHI CANTT-10
GE E/M RR HOSP. DELHI CANTT-10
REPAIR / REPLACEMENT OF FITTING FIXTURES OF HOSP BLDG ADC AND CTVS CENTRE AT AHRR UNDER GE E/M RR HOSP. DELHI CANTT-10
2025_MES_711474_1
GE/H/T-11/ 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE E/M RR HOSP. DELHI CANTT-10
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE E/M RR HOSP. DELHI CANTT-10
₹50,000
Yes
28 Aug 2025
30 May 2025
30 Jun 2025
30 May 2025
27 Jun 2025
13 Jun 2025
Amount
S & F in replacement of surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser, IP40. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen/watt, PF ≥0.95. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed
S & F in replacement of surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser, IP40. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 5000K, ≥ 110 lumen/watt, PF ≥0.95. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed
S & F in replacement ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed.
S & F in replacement ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 5000K, ≥ 110 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed.
S & F in replacement ceiling recessed mounting LED SKY Lights luminaire, Printed Customised design (design as per approval by GE), 600 mm x 600 mm, (2' x2'), 36 Watts, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed.
S & F in replacement Surface mounted LED Round light fitting 15 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 100 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed.
S & F in replacement, Flush fitting LED Round light fitting 15 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 100 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed.
S & F in replacement Surface mounted LED Round light fitting 20 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 100 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed.
S & F in replacement, Flush fitting LED Round light fitting 20 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 100 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed.
Taking down carefully unserviceable of aluminium point wiring complete except for ceiling or where not feasible fan / plug / bell but including fittings such as switches, ceiling rose, pendants, regulator etc. and making good disturbed surface to match with the existing surface of roof / wall / floor by applying putty and applying colour / white wash finish complete all as specified and directed.
M & L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including PVC conduit of suitable dia, complete with all conduit accessories, GI metal flush box of suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- Note - All accessories likes modular top cover plate / hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates. (a) One light/fan/bell/exhaust fan point controlled by one switch.
(b) One 3 Pin socket outlet 5 Amps on Independent board.
(c) One 3 Pin socket outlet 5 Amps on same board.
(d) One light point controlled by two, two way switch
All as per srl item No. 11 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point.
M & L for point wiring of concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing in existing conduit, GI metal flush box of suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates. (a) One light/fan/bell/exhaust fan point controlled by one switch.
(b) One 3 Pin socket outlet 5 Amps on Independent board.
(c) One 3 Pin socket outlet 5 Amps on same board.
All as per srl item No.16 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point.
M & L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing in casing & caping, GI metal flush box of suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates. (a) One light/fan/bell/exhaust fan point controlled by one switch.
(b) One 3 Pin socket outlet 5 Amps on Independent board.
(c) One 3 Pin socket outlet 5 Amps on same board.
All as per srl item No.20 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point.
S & F Modular Switch 16 Amp, 1 Module, single pole one way, ISI marked complete all as specified
S & F Modular Socket 6 / 16 A - 2/3 Pin combined 2 module complete all as specified and directed
S & F Modular Switch 1 way 6 /10 A, 1 Module complete all as specified and directed.
S & F Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module complete all as specified and directed.
S & F Modular Switch 2 way 6 / 10 A, 1 Module complete all as specified and directed.
S & F Modular Bell push 6A 1 module , 240 Volts complete all as specified and directed.
S & F Modular fan regulator step type, 120W, 240 V, complete all as specified and directed.
S & F Ceiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed.
S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, 240 Volts, complete all as specified and directed.
S & F Bell Ding Dong, 240 Volts complete all as specified and directed.
Material and labour in replacement of Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit of suitable size, complete with all PVC accessories and 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB incl removing old sub main complete incl cutting chases etc all as specified and directed. Note : Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor.
Material and labour in replacement of Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit of suitable size, complete with all PVC accessories and 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB incl removing old sub main complete incl cutting chases etc all as specified and directed. Note : Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor.
Material and labour in replacement of Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit of suitable size, complete with all PVC accessories and 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB incl removing old sub main complete incl cutting chases etc all as specified and directed. Note : Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor.
Material and labour in replacement of Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in existing PVC conduit or new casing & caping of suitable size, complete with all PVC accessories and 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall and removing old sub main complete all as specified and directed.
Material and labour in replacement of Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in existing PVC conduit or new casing & caping of suitable size, complete with all PVC accessories and 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall and removing old sub main complete all as specified and directed.
Material and labour in replacement of Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in existing PVC conduit or new casing & caping of suitable size, complete with all PVC accessories and 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall and removing old sub main complete all as specified and directed.
Material and labour in replacement of Sub main wiring with 4 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit / casing & caping of suitable size, complete with all PVC accessories and 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall all as specified and directed.
Material and labour in replacement of Sub main wiring with 4 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit / casing & caping of suitable size, complete with all PVC accessories and 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall all as specified and directed.
Supply and fix Modular AC Box with MCB (25A, SP) Protected Socket, with sheet steel enclosure including Top Pin of 25 A, with indicator complete all as specified and directed
S & F in replacement decorative cover for MCB Box for aesthetic things for front Cover Mcb Box Cover with printed customised design (design as per approval by GE)size 12" x 12" complete all as specified and directed.
S & F in replacement decorative cover for MCB Box for aesthetic things for front Cover Mcb Box Cover with printed customised design (design as per approval by GE)size 15" x 12" complete all as specified and directed.
S & F in replacement decorative cover for MCB Box for aesthetic things for front Cover Mcb Box Cover with printed customised design (design as per approval by GE)size 18" x 12" complete all as specified and directed.
Supply and fix in replacement of energy efficient wall mounted LED bulk head light fitting 10 / 12 watt, Outdoor IP65, LED Bulkhead Light, CW 6500K , PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed.
S & F in replacement of LED street / security light fittings 25 Watt, with day night light sensor, high pressure die cast aluminium housing, IP 65 should have minimum efficiency at level >=110 lumens / watt, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, 240V AC, an operating voltage range of 140-270V complete all as specified and directed.
S & F in repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed.
S & F in repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed.
S & F in repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 6 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed.
S & F in repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, TPN 4 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed.
S & F in repairs MCB, SPN, 63 Amps capacity, 240V, B Curve type, 10kA, double pole with over load and short circuit protection complete all as specified and directed
S & F in repairs MCB, TPN, 63 Amps capacity, 415 V, B Curve type, 10kA, with over load and short circuit protection complete all as specified and directed
S & F in repairs MCB, SP, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed
S & F in repairs MCB, SP, 6 to 32 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed
Supply and fix in replacement exhaust fan, steel body, AC single Phase, 230V of size 300mm sweep with, blades, and frame and louvers complete with Copper winding complete all as specified and directed
S & F in repairs Modular White cover plate with frame, 2 module as per make on ground
S & F in repairs Modular White cover plate with frame, 3 module as per make on ground
S & F in repairs Modular White cover plate with frame, 4 module as per make on ground
S & F in repairs Modular White cover plate with frame, 6 module as per make on ground
S & F in repairs Modular White cover plate with frame, 8 module as per make on ground
S & F in repairs Modular Metal Flush Box, 1/2 module as per make on ground
S & F in repairs Modular Metal Flush Box, 3 module as per make on ground
S & F in repairs Modular Metal Flush Box, 4 module as per make on ground
S & F in repairs Modular Metal Flush Box, 6 module as per make on ground
S & F in repairs Modular Metal Flush Box, 8 module as per make on ground
S & F in repairs Modular Switch ROMA, 6/10 A
S & F in repairs Modular Switch ROMA, 16 A
S & F in repairs Modular Socket ROMA, 6/10 A
S & F in repairs Modular Socket ROMA, 6/16 A
innovision limited (BID ID -3329258)
Ruchi enterprises (BID ID -3330866)
OMVIN ENTERPRISES LLP (BID ID -3326807)
RUCHIKA ENGG.WORKS (BID ID -3326712)
SANJEEV ENTERPRISES (BID ID -3329367)
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .