Loading
Loading…
Loading…
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
27 Jul 2026, 4:00 pmDue tomorrow
Executive Engineer, Water Works Division Srinagar
SRINAGAR
PLEASE REFER TO BOQ
2026_PHE_315216_5
20/WWD/Sgr/Civil of 2026-27
Open Tender
Civil Works
Percentage
SRINAGAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Executive Engineer, Water Works Division Srinagar
₹30,000
21 Jul 2026
21 Jul 2026
28 Jul 2026
21 Jul 2026
27 Jul 2026
21 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil. | 162 | cum | 256.85 | ₹41,609.7 |
| 2Providing of G.I pipes complete with G.I fittings excluding cost of earthwork etc. Light class. | |||||
| 2.01 | 100 mm dia nominal bore. | 900 | mtr | 1,185.59 | ₹10,67,031 |
| 3Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee including cutting and threading the pipe etc. complete. | |||||
| 3.01 | 25 to 40mm dia nominal bore | 2 | each | 730.25 | ₹1,460.5 |
| 3.02 | 15 to 20mm dia nominal bore | 6 | each | 550 | ₹3,300 |
| 4 | Filling available excavated earth (excluding rock) in trenches plinth sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift up to 1.5m. | 145.8 | cum | 218.4 | ₹31,842.72 |
| 5 | Providing and fixing 20mm dia CI Double acting air valve of approved quality with nuts, bolts, rubber insertions etc. Complete. (The tail pieces, tapers etc. if required will be paid separately. | 1 | No | 2,000 | ₹2,000 |
| 6 | Providing/fabricating and fixing of MS flanges of required thickness as per the direction of Engineer incharge including the cost of welding in position cutting pipe ends to the pipes of different dia including cost to nuts, bolts etc laying of flanged pipes in position. (100mm) | 161 | Pair | 1,400 | ₹2,25,400 |
| 7 | Manfacturing/fabricating/providing/fixing of MS fittings made out of MS plates orf required thickness excluding the cost of lead caulking etc the work should be leak proff and painted. | 0.4 | Kg | 250 | ₹100 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.02 MB
BOQ_1037976.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].