Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.6 LAccepted-AOC | L1 | Accepted-AOC AOC NEW | |
| 2 | L2₹14.3 L+₹64,067.74 (4.71%)Rejected-Finance | L2 | Rejected-Finance Rejected |
Tender Value
₹15.1 L
EMD Value
₹15,122
Closing Date
5 Sept 2020, 3:00 pmClosed
The Chairman , K.U.B.S., Pimpalgaon (B)
krishi Utpanna Bazar Samitee Pimpalgaon (B)
As Per Boq
2020_CMTDM_606675_1
E Tender Notice No 2 For 2020-2021 ( Second Call )
Open Tender
Interior / Furniture
Item Rate
90 days
krishi Utpanna Bazar Samitee Pimpalgaon (B)
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,180
Yes
via Net Banking
₹15,122
Yes
15 Jan 2021
29 Aug 2020
7 Sept 2020
29 Aug 2020
5 Sept 2020
29 Aug 2020
Amount
Work description
DESKS : CHAIRMAN's TABLE (2.20m x 0.90m) Providing and fixing of table with 36mm thick top made up of 19+12mm thick Ply & verticals made up of 19mm thick Ply including match wood beading/moulding, finished with melamine polish. The works to include all hardware like castors, hinges, ball catches, fully extendable drawer slides, locks, handles etc. of approved make. Design and detail of the table shall be as per Architects design. All the surfaces to be finish in 4 mm thick veneer externally and 0.8mm thick laminate internally as approved by the Architect as per design. Spec. As directed by Architect.
DESKS : VICE-CHAIRMAN (2.00m x 0.90m) Providing and fixing of table with top and verticals made up of 19mm thick Ply including wooden beading/moulding, finished with matching paint/polish for all exposed edges. The works to include all hardware like castors, hinges, ball catches, fully extendable drawer slides, locks, handles etc. of approved make. Locks to be of single control type. Design and detail of the table shall be as per Architects design. All the surfaces to be finish in 1 mm thick laminate externally and 0.8mm thick laminate internally as approved by the Architect as per design. Spec. As directed by Architect.
DESKS : SECRETARY's TABLE (1.8m x 0.75m) Providing and fixing of table with top and verticals made up of 19mm thick Ply including wooden beading/moulding, finished with matching paint/polish for all exposed edges. The works to include all hardware like castors, hinges, ball catches, fully extendable drawer slides, locks, handles etc. of approved make. Locks to be of single control type. Design and detail of the table shall be as per Architects design. All the surfaces to be finish in 1mm thick laminate externally and 0.8mm thick laminate internally as approved by the Architect as per design. Spec. As directed by Architect.
DESKS : CONFERENCE TABLE (10.0m x 0.75m) Providing and fixing of table with 36mm thick top made up of 19+12mm thick Ply and verticals made up of 19mm thick Ply including match wood beading/moulding, finished with melamine polish. The works to include all hardware of approved make. Design and detail of the table shall be as per Architects design. All the surfaces to be finish in 4 mm thick veneer externally and 0.8mm thick laminate internally as approved by the Architect as per design. Spec. As directed by Architect.
DESKS : CLERK TABLE (1.8m x 0.75m) Providing and fixing of table with top and verticals made up of 19mm thick Ply including wooden beading/moulding, finished with matching paint/polish for all exposed edges. The table to include a drawer unit with two pencil drawers of 100mm deep & a file shutter of 450mm, an keyboard tray & 250mm wide CPU stand. The works to include all hardware like castors, hinges, ball catches, fully extendable drawer slides, locks, handles etc. of approved make. Locks to be of single control type. Design & detail of the table shall be as per Architects design. All the surfaces to be finish in 1mm thick laminate externally and 0.8mm thick laminate internally as approved by the Architect as per design. Spec. As directed by Architect.
STORAGE UNITS : SIDE CREDENZA IN LAMINATE (1.0m x 0.45m x 0.75m High) Providing and fixing storages of sizes as mentioned above. It shall consist of a top, sides and base of 19mm thick commecial Ply and 6mm thick commercial Ply back, all external surfaces including shutters to be finished in 1mm thick laminate and all internal surfaces to be finished with 0.8mm thick laminate as approved. Shutters shall be made of 19mm commercial Ply, fixed commercial Ply shelf shall be made of 19mm commercial Ply on metal buttons shall be provided as per drawing. Rate shall be inclusive of all necessary fittings like, locks, handles and any miscellaneous hardware items. Spec. As directed by Architect.
STORAGE UNITS : DRAWER UNIT IN LAMINATE (0.45m x 0.45m x 0.70m) Providing and fixing drawer unit of sizes as mentioned above. It shall consist of a sides, shutters & shelf's of 19mm thick commercial Ply and 6mm thick commercial Ply back, all external surfaces including shutters to be finished in 1mm thick laminate externally and 0.8mm thick laminate internally as approved by the Architect as per design, with two pencil drawers of 100mm deep & a file shutter of 450mm. The works to include all The works to include all hardware like castors, hinges, ball catches, fully extendable drawer slides, locks, handles etc. of approved make. Locks to be of single control type. Design & detail of the table shall be as per Architects design. Spec. As directed by Architect.
STORAGE UNITS : T.V. unit panneling in veneer (1.5m x 2.7m x 0.075m thick) Providing and fixing T.V. paneling for of sizes as mentioned above. It shall consist of frame inside of 19mm thick commercial Ply and 19mm thick commecial ply from outside with all external surfaces to be finished with 1mm thick laminate as approved. Rate shall be inclusive of all miscellaneous hardware items. Spec. As directed by Architect.
PARTITIONS / PANELLING / BOXING : 1.20m High Solid partition for Cubicles Providing and fixing 80mm thick solid partition of 1.20m high. Framing of the partition shall consist of 0.38m x 0.38m C.P. sal wood at 0.60m c/c. Both ways horizontally & vertically with 19mm commercial Ply skin on both sides of partition, finish with 1mm laminate. Rate shall include necessary hardware, leaping, moulding etc. NOTE : In all partitions, necessary cut-outs should be made for HVAC ducts and electrical Cable trays above false ceiling and HVAC and electrical conduit cut-outs wherever directed and as required. Spec. As directed by Architect.
PARTITIONS / PANELLING / BOXING : Full height Glazed partition Providing & fixing glazed partition of height 2.1m to 2.7m in 10mm thick toughened glass to be fix with the help of Hafle's profile. Rate shall include necessary hardware etc. NOTE : In all partitions, necessary cut-outs should be made for HVAC ducts and electrical Cable trays above false ceiling and HVAC and electrical conduit cut-outs wherever directed and as required. Spec. As directed by Architect.
OTHER ITEMS IN CARPENTARY : Pin-up boards Providing and fixing pinup boards. 12mm soft boards of good density to be mounted over 12/6 mm Ply. The soft board will be covered with a plain cloth from front and also edges will be covered with the plain cloth. 25mm moulding will be fixed on all four sides and will be finished in duco paint/Melamine polish as directed. Spec. As directed by Architect.
FALSE CEILING AND PUNNING WORK : False ceiling in POP. Providing and fixing 12mm thick POP false ceiling at levels as shown in the drawing. Rate shall be inclusive of any vertical ceiling part, cut outs for spot light, tube light, A.C. Grills, fire and security systems. Note : a) Structural members of false ceiling should be located considering lighting & HVAC duct / diffuser & ceiling mounted fitting layout. b) Anchor fasteners should be used for supporting the grid. c) Frame work should be certified from the architect for stability & strength before fixing the sheets. d) All material, fixtures fastening and other specifications as per manufacturers guidelines. Spec. As directed by Architect.
FALSE CEILING AND PUNNING WORK : False ceiling in 600 x 600 Modular tiles. Providing & fixing false ceiling of Dune Tegular 600 x 600mm with 24mm thick prelude grid (Armstrong make) including necessary scaffolding as per detailed drawings etc. complete. Specification as directed by Architect. Note : a) Structural members of false ceiling should be located considering lighting & HVAC duct / diffuser & ceiling mounted fitting layout. b) Anchor fasteners should be used for supporting the grid. c) Frame work should be certified from the architect for stability & strength before fixing the sheets. d) All material, fixtures fastening and other specifications as per manufacturers guidelines. Spec. As directed by Architect.
MISCELLANEOUS : PVC flooring Providing and fixing PVC flooring as per approved shade and sample etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : PVC skirting Providing and fixing PVC skirting as per approved shade and sample etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : Synthetic Door mats Providing and fixing Synthetic door mats (900 x 600mm) 3m make etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : Chairs (Type - A) Providing of chairs with revolving base and Gas spring lift with height and tilt adjustment, adjustable ABS back including Nylon pronged PU arms and high density foam with upholstered finish. Spec. As directed by Architect.
MISCELLANEOUS : Chairs (Type - B) Providing of chairs with revolving base and Gas spring lift with height and tilt adjustment, adjustable ABS back including Nylon pronged PU arms and high density foam with upholstered finish. Spec. As directed by Architect.
MISCELLANEOUS : Chairs (Type - C) Providing of chairs with revolving base and Gas spring lift with height and tilt adjustment, adjustable ABS back including Nylon pronged PU arms and high density foam with upholstered finish. Spec. As directed by Architect.
MISCELLANEOUS : Chairs (Type - D) Providing of chairs with revolving base and Gas spring lift with height and tilt adjustment, adjustable ABS back including Nylon pronged PU arms and high density foam with upholstered finish. Spec. As directed by Architect.
MISCELLANEOUS : SOFA in fabric / Artificial Leather - SINGLE SEATER SOFAS Providing & fixing in position Full cushion sofa using T.W internal frame in 2 x 1-1/2". 4" cushioning over linear springs using rubberized coir foam 3" & U Foam 1" thick for seat and 3" for back with upholstery finish from all sides over cloth backing with 2" thk U foam cushioning finished with tapestry as directed etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : SOFA in fabric / Artificial Leather - TWO SEATER SOFAS Providing & fixing in position Full cushion sofa using T.W internal frame in 2 x 1-1/2". 4" cushioning over linear springs using rubberized coir foam 3" & U Foam 1" thick for seat and 3" for back with upholstery finish from all sides over cloth backing with 2" thk U foam cushioning finished with tapestry as directed etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : SOFA in fabric / Artificial Leather - THREE SEATER SOFAS Providing & fixing in position Full cushion sofa using T.W internal frame in 2 x 1-1/2". 4" cushioning over linear springs using rubberized coir foam 3" & U Foam 1" thick for seat and 3" for back with upholstery finish from all sides over cloth backing with 2" thk U foam cushioning finished with tapestry as directed etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : CPU trolley's Providing & fixing CPU trolley's etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : SIGNAGES Providing & fixing Stainless Steel Signages of size 150mm x 150mm or 75mm x 300mm for Toilet / Pantry etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : VERTICAL BLINDS Providing & fixing in position vertical blinds 4" wide of Vista make or equivalent & as directed of varying length, approved fabric with heavy duty anodised aluminium fittings, nylon rollers, tiling blinds with stainless steel chain & stacking of blinds by nylon cords and handles including necessary fittings and fixtures (approved colour & shade) with scotch guard treatment on both sides etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : ROLLER BLINDS Providing & fixing in position roller blind of Vista make or equivalent & as directed of varying length, approved fabric with heavy duty anodised aluminium fittings, nylon rollers, tiling blinds with stainless steel chain and stacking of blinds by nylon cords and handles including necessary fittings and fixtures (approved colour & shade) with scotch guard treatment on both sides etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : MIRRORS Providing & fixing 8mm thick mirrors of any size on 75mm long S.S. studs in position etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : FROSTED FILM Providing and fixing frosted film etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : K.U.B.S. LOGO Providing and fixing K.U.B.S. Logo etc. complete. Spec. As directed by Architect.
MISCELLANEOUS : MATRESS Providing and fixing Matress etc. complete. Spec. As directed by Architect.
SHRI RANDHIR UTTAMRAO JADHAV
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .