Periodical Services to OTM Accn of Zone D, E and F at Sri Ganganagar Mil Stn

Amount

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling and applying one coat of acrylic interior emulsion @18-20Sqm/Liter/Coat complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and then applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for Complete removal of existing treatment using steel wire brushing, scraping down smoke shoots, moulds and efflorescent salts and and finishing of walls surfaces of any description over 10cm girth and applying two coats of acrylic interior emulsion @ 10Sqm/Litre/2 Coat applied by roller over a coat of primer @10Sqm/Ltr/Coat and acrylic wall care putty (thickness vary from 1.5mm to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using following brands complete all as specified and as directed by Engr-in-Charge. Notes : - (i) After applying wall putty, the contractor will inform to the GE as well as Engineer in Charge for site inspection before applying further finishes.

M&L for prepration of old painted wooden surfaces of any description not otherwise described over 10.0 cm width or girth and applying one coat of synthetic enamel paint @0.56Litre/10 Sqm/Coat complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint @0.60Litre/10Sqm/Coat complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster of any description on brick or stone walls/ceiling including raking out joints,hacking for key,scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge.

Demolition of brickwork or stone/ boulder masonry, but built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engr-in-Charge.

M&L for brick work with fly ash bricks, straight or curved on plan, exc 6m mean radius built in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for 15mm thick plastering in cement mortar on brick/concrete wall surfaces externally in CM (1:4) with water proofing compound (as approved by GE) @ 2% by weight of cement and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. Note : The rate of WPC shall be measured and paid seperately in respective items.

M&L for cement plastering 10mm thick any type of faces of brick or concrete surfaces in cement mortar 1:6 work finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for cement plastering 10mm thick any type of faces of brick or concrete surfaces in cement mortar 1:3 work in isolated width or in widths not forming a part of general plastering work exc 15 cm but n. exc 30 cm in width finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement internally complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 5mm thick on fair faces of concrete surfaces as in ceiling in cement morter 1:3 internally up to all floor complete all as specified and as directed by Engr-in-Charge.

S&F chicken wire mesh of mesh size 12 mm and wire diameter 0.63mm for lathing including all laps, cuttings & waste fixing in old RCC slab/beam/chajja complete all as specified and directed by Engineer - in - Charge.

Supply only Integral water proofing compound as per specifications and ISI approved complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plasterd surfaces of ceiling and applying three coats of white wash by making the lime slakedat site and shall be mixed and stirred about 05 litre of water for 01 Kg of unslaked lime to make thin cream. Then allowed to stand and then be screened through thin coarse cloth.1 Kg of gum dissolved in hot water to be added with every 01 cubic meter of cream. About 1.30 Kg of Sodium Chloride to be added for every 10 Kg of lime and small quantity of ultramarine blue (upto 3gm/Kg of lime) shall also be added to the last two coats of white wash including filling of wall care putty in dipressions/indulations/uneveness complete all as specified and as directed by Engr-in-Charge.

M&L for two coats of acrylic emulsion distemper @ 10Sqm/Litre/2 Coat applied by roller over a coat of primer @10Sqm/Ltr/Coat and acrylic wall care putty (thickness vary from 1.5mm to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) including preparation of newly plastered surfaces of wall by using following brands complete all as specified and as directed by Engr-in-Charge. Notes : - (i) After applying wall putty, the contractor will inform to the GE as well as Engineer in Charge for site inspection before applying further finishes. Further work will be done only after written approval of prepared surfaces from the GE and Engineer in Charge.

M & L for preparation of newly plastered surfaces and finishing walls with Acrylic Smooth exterior emulsion paint of required shade new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior weather coat (primer applied @ 2.20 kg/10 sqm) and water proof putty for external surfaces of walls (thickness vary from 1.5mm to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using roller complete all as specified and as directed by Engr-in-Charge. Notes : - (i) After applying wall putty, the contractor will inform to the GE as well as Engineer in Charge for site inspection before applying further finishes. Further work will be done only after written approval of prepared surfaces from the GE and Engineer in Charge.

M & L complete removal of existing treatment of wall surfaces and applying two coat Acrylic Smooth exterior emulsion paint of required shade applied @ 1.0 ltr/10 sqm/coat over and including priming coat of exterior weather coat (primer applied @ 2.20 kg/10 sqm) and water proof putty for external surfaces of walls (thickness vary from 1.5mm to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using roller complete all as specified and as directed by Engr-in-Charge. Notes : - (i) After applying wall putty, the contractor will inform to the GE as well as Engineer in Charge for site inspection before applying further finishes. Further work will be done only after written approval of prepared surfaces from the GE and Engineer in Charge.

M&L for Complete removal of existing treatment and finishing of walls surfaces of any description over 10cm girth and aplied two coat of plastic emulsion paint @1.6 Ltr/10 sqm/1Coat over a coat of primer @ 10Sqm/Litre/Coat and average 2mm thick (in 2 or more coats as desired smoothness and levelling of surfaces) wall care putty complete all as specified and as directed by Engr-in-Charge. Notes : - (i) After applying wall putty, the contractor will inform to the GE as well as Engineer in Charge for site inspection before applying further finishes.

M&L for apply one coat of acrylic interior emulsion @ 20Sqm/Litre/ Coat applied by roller including filling acrylic wall care putty in depressions, holes & undulations on surfaces of wall by using following brands complete all as specified and as directed by Engr-in-Charge. Notes : - (i) After applying wall putty, the contractor will inform to Engineer in Charge for site inspection before applying further finishes work will be done only after satisfaction of Engineer in Charge.

M&L for preparation of old plasered or unplastered wall surfaces washing or rubbing down and applying one coats of cemet base paint @1.07Kg/10 Sqm/coat complete all as specified and as directed by Engr-in-Charge.

M&L for prepation by washing, rubbing down, scraping using steel wire mesh etc and applying 2 coat of white wash on old decorated ceiling surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for finishing of concrete or old walls plastered surfaces by Painting adequate number of coats in lines, dashes, arrows, letters, etc. on roads, pavements kerbstone, roadside and the like exc 10cm wide with road marking paint, white / golden yellow / Black over a priming coat (if required) complete all as specified and as directed by Engr-in-Charge.

M&L for TMT bars 8 to 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia using TMT bars complete all as specified and directed by Engineer - in - Charge.

M&L for removing cover and loose concrete from main reinforcement using wooden mallets/wire brush/waterjet to complete expose the reinforcement in the distressed portion of column, beam, bracings and chajja etc (All loose unsound and cracked concrete should be removed and plan area of concrete surface to be measured) at any height complete all as specified and directed by Engineer-in-Charge

M&L for remove the rust from main reinforcement completely using wsand paper or wire brush and remove non metal complexcompound formed due to corrosion of rust at any height and then applying rust removing chemical complete all as specified and directed by Engineer-in-Charge. Make: As approved by GE.

M&L for applying epoxy based bond coat using brush and applying polymer concrete (not less than 20 mm thick) in the proportion of (1:3:1) one part of cement 3 part of sand and 1 part of 10 mm and down stone aggregate using 8-10 kg of acrylic based polymer per 50 kg bag of cement all as manufacturer's instruction complete all as specified and directed by Engineer-in-Charge. Make : As approved by GE.

Desmantling of concrete of any description in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

S&F providing precast cement concrete louvres and jallies, 35mm thick (measured solid) cm 1:4 type-B0 1:2:4 (12.5mm) including all mouldings but excluding frame complete all as specified and as directed by Engr-in-Charge. Note: - Precast frame shall be measured separately and paid for under respective item of BOQ.

Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wallin) corbels, brackets, etc (of any section indicated), with plain fair faces, incl chamfers, weatherings, throating etc. and setting in mortar CM type B1 1:2:4 (20 mm agrregate) complete with joints to match complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and as directed by Engr-in-Charge.

S&F sheet glass 4.0 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle not exc 0.5 Sqm in each pan complete all as specified and as directed by Engr-in-Charge.

M&L complete removal of existing treatment and finishing walls with textured exterior/interior paint of required shade (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of primer applied @ 2.20kg/10 sqm with average 2mm thick (in 2 or more coats as desired smoothness and levelling of surfaces) interior /exterior (as per requirement) putty complete all as specified and as directed by Engr-in-Charge. Notes : - (i) After applying wall putty, the contractor will inform to the GE as well as Engineer in Charge for site inspection before applying further finishes.

M&L for complete removal of existing treatment of finished wall/roof sheets and finishing the steel roof sheets/external surfaces of wall etc with camouflage paint in approval pattern with two coat of synthetic enamel over red oxide/priming coat complete all as specified and directed by Engr-in- Charge.

M&L for apply one coat of Acrylic smooth exterior emulsion paint or required shade applied @ 1.00 ltr/10 Sqm/coat and including putty filling at undulated or rough surfaces as required for desired smoothness and leveling of surfaces by using roller complete all as specified and directed by Engr-in- Charge.

Ramdev Enterprises (BID ID -3401837)

KHANNA CONSTRUCTIONS (BID ID -3401734)