Repair and Renovation of Centralized facilities in the Department of Statistics in connection with NAAC Accreditation of Jammu University

Amount

Removing dry or oil bound distemper, water proofing cement paint etc. by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty 1.0mm (avg.) thickness of approved brand and manufacture, over the plastered surface to prepare the surface even & smooth complete.

Distempering with Ist quality acrylic distemper (ready mixed) having VOC content less than 50 gm/ltr., Two or more coats including applying a coat of water thinable cement primer of approved brand and manufacture.

-----------do------------- One or more coats without priming coat with cement primer.

Painting with synthetic enamel of approved brand and manufacture of required colour to give an even shade (One or more coat) on wood /Steel Work

Engagement of Labour for different works Carpenter II Class

------------do---------------- Mazdoor

Repair to plaster of thickness 12mm to 20 mm in patches including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish outside the University Campus.

Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :With non modular brick tiles

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete

Renewing glass panes, with wooden fillets wherever necessary :Float glass panes of thickness 4.0 mm (weight not less than10kg/sqm)

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 250 x 10 mm

---------do------------ 150 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 125 mm

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300 x 16 mm

Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :30 mm thick including ISI marked anodised aluminium butt hinges with necessary screws including applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac)

Uprooting of rank vegetation/Plants grown on walls/roofs by way of dismantling brick masonary/concrete, taking out of the roots and then doing the brick work and refinishing the wall at any height (cost of new brick masonary & finishing to be paid separately)including scaffolding whereever required.

Brickwork with 2nd Class brick with cement mortar 1:4 (1 cement : 4 sand). All work upto floor V level.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking at site. Of area beyond 3.00 sqm

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately ) For Fixed portion / Openable Powder coated aluminum (minimum thickness of powder coated 50 microns)

---------do------------- b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and allied fittings complete as required including the cost of PVC / neoprene gasket required Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item) : With glass panes of 5.0 mm thickness

Regrinding of Terrazzo/Kota stone flooring and polishing the Same including necessary repairs wherever required to give an even and smooth surface

GOPAL SINGH

M/S BISHAN DASS THAKUR CONTRACTOR

M/S DALJEET SINGH