REPAIR/REPLACEMENT OF JOINERY AND ALLIED ITEMS AT MD ACCN IN ZONE - 1 TO 5 AND ZONE 7 UNDER AGE B/R-I UNDER GE BABINA CANTT

Amount

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed.

Taking down shutters of any description n.exc 1 Sqm each etc complete all as specified and as directed

Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each etc complete all as specified and as directed

Refixing shutter of any description exc 1 Sqm but n exc 2 sqm each in same opening etc complete all as specified and as directed

Refixing shutter of any description exc 2 Sqm each in same opening etc complete all as specified and as directed

S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, etc complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement and fix in the frame at site complete all as specified and as directed

M&L, aluminium powder coated/Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified & directed.

M&L for aluminium powder coated/Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. S & F 5.5 mm thick tinted glass in panel of shutter fixed with glazing clips , rubber gasket and powder coated aluminium snap beading so as to make air tight and including S & F powder coated butt hinges type C-1 ,100 mm size 3 nos per shutter , powder coated aluminium handle of 150mm size 2 Nos (One on each side of shutter) , powder coated aluminium tower bolt of size 200 mm ( 2 Nos ) per shutter , mortise lock , brass body ,6 levers ( 1 No) with duplicate keys , aluminium (extruded section) hydraulic door closer regulated designation No-3 Universal type ( 1 No) & Floor door stopper ( 140 mm ) overall ,aluminium body 1 No on each shtter etc complete all as specified and as directed. Note: (i) Shutter ( Glazed ) shall be fixed on frame of required size and shall be measured seperately (iii) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer . Note : The minimum thickness of powder coating shall be 50 Micron complete all as specified & directed.

S&F in repair tinted glass and glazing with beading of any size of 5.5 mm thick complete all as specified and as directed.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet with PVC doors etc complete all as specified and as directed

S&F, plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed etc complete all as specified and as directed

S&F, Pressed steel frames for doors(125x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete all as specified & directed.

S&F, Pressed steel frames for doors(105x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete all as specified & directed.

S&F, locally fabricated plain framed paneled shutter 30 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and as directed

S&F, locally fabricated 30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed

S&F, locally fabricated 30 mm thick IInd class HW partly paneled& Partly gauged & skeleton shutters open rebated and prepared to receive glass/gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed

S&F, 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, with decorative face veneers on both faces with lipping to match complete all as specified and directed.

S&F, 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge

Ditto as above 24 but 30 mm thick windows, ventilators etc provided with stiles and rails as including fillets specified in SSR Pt-I Sec 8 clause 8.20 (b) etc complete all as specified and as directed

S&F 3mm thick, sheet glass, ordinary quality and glazing withoil putty in square in exc 0.5 sq.m in each pane etc complete all as specified and as directed.

S&F in repair 3 mm thick sheet glass, Ordinary quality and glazing with wooden beads in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty including hacking out old broken glass from wooden or steel frame surround complete all as specified and as directed etc complete all as specified and as directed.

S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of apertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.

S&F, in repair galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.

S&F, butt hinges medium weight cold rolled, mild steel and fixed 50 mm size etc complete all as specified and as directed.

S&F, butt hinges medium weight cold rolled, mild steel and fixed 75 mm size etc complete all as specified and as directed.

S&F, butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed.

S&F, aluminum handles cast type anodized 100 mm size etc complete all as specified and as directed

S&F, aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed

S&F, aluminum anodized barrel tower bolts of extruded section 150 mm long etc complete all as specified and as directed

S&F, aluminum anodized barrel tower bolts of extruded section 200 mm long etc complete all as specified and as directed

S&F, aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) 300mm long etc complete all as specified and as directed

M&L, prepairing surfaces of wood and wood based material, steel and iron work, new or old, of any desctiption and girth not otherwise desctibed and treated with tar or coal tar black paint etc complete all as specified and as directed

S&F, mild steel flat iron 25x3 mm as in hold fasts etc all as specified, Confirming to Fe 410-0 or Fe 310-0etc complete all as specified and as directed

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required not exc half brick walletc complete all as specified and as directed

M&L, PCC 1:3:6 type C1 as in coping or bed plates for filling in holes of hold fasts or in pressed steel frame including necessary use and waste of form work etc complete all as specified and as directed

M&L, two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.

M&L, framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 etc complete all as specified and as directed

S&F, 1mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and as directed

S&F in repair steel window or ventilator fixed type with glazing bars etc complete all as specified and as directed

S&F, in repairs steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specified and as directed

S&F, in repairs steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specified and as directed

M&L, two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

S&F, in repair 225mm, ordinary rat tail rod patttern springs includding roller and roller plate etc complete all as specified and as directed

Taking down unserviceable aluminium shutter of any description exc 1 but n.exc 2 Sqm each making easing, servicable, replacing rubber beading and refixing in the same opening complete all as specified and as directed by Engr in charge

Taking down unserviceable aluminium shutter of any description n.exc 1 Sqm each making easing, servicable, replacing rubber beading and refixing in the same opening complete all as specified and as directed by Engr in charge

S&F, in repair aluminium (extruded section body) door closer hydraulic regulated designation No 3 uiversal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and as directed

S&F, in repair double action floor springh hydraulically door closer for aluminium shutter, regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed omplete all as specified and as directed

S&F, in repair floor door Stoper 140mm overall length of cover plate) aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor etc complete all as specified and as directed

S&F, in repair Mortice lock alumunium body, vertical type of size 100mm of 7 levers etc compete all as specified and as directed

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified & directed.

Demolition of brick work or stone Masonary built in cement mortar as in drain, manhole, septic tank and soak well complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radious and built in cm 1:4 complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and as directed

M&L rendering 15mm thick in cement mortar 1:4 , on fair faces of brick or concrete surface of wall surface finished even and smooth, without using extra cement complete all as specified & directed.

Preparing on newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer etc complete and as directed.

Preparing on newly plastered surfaces of wall and applying two coats of cement based paint over a coat of cement based primer etc complete all as specified & directed.

M&L for preperation of new plastered surface and applying two coats of white wash on newly plastered surfaces of ceiling/wall complete all as specified & directed.

Dismantling ceiling boards (fiber,PVC,pulp,insulation etc) or wall board complete all as specified and as directed

S&F false ceiling with 4 mm thick gypsum board tiles laminated with white PVC film on face side & metalized polyster film (Aluminium foil) on the back side with all four edges sealed with PVC film of size 600 x 600 mm (595 X 595 mm) fixed with clips & screws including anodised aluminium snap grid frame work for false ceiling of Tee/Angle of weight not less than 300 gm per RM with slot for fixing including necessary suspender of flat iron or 4 mm dia bars of required length fixed in purlin of roof not exceeding 1.20 m both ways including all accessories required for suspending ceiling work and gypsum board complete all as specified and as directed by the Engineer-in-Charge.

S&F for PVC Wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site of 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to PVC frame complete all as specified and directed

S&F in repair Fancy type , Stainless Steel curtain rod of any size with end knob ( 2 nos per length ) Fancy type and end brackets ( 2 nos per length ) and fixed on wall etc complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed.

M&L, for PCC 1:2:4 type B-0 using 12.5 mm gradesd stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed.

M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed.

M&L for Vitrified ceramic tiles 7-10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and directed.

M&L for vitrified ceramic tiles 7-10 mm thick (square / rectangular) polished area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in Vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc etccomplete all as specified and as directed

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in vertical surface as skirting, dado etc. set including rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:3 finished rough for wall tiling and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed.

M&L for glazed coloured tiles 450x300x7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

S&F in repair glass self (500mmX60mm) with ABS brackets (450X125X6) and fixed to wall with CP brass screws complete all as specified and as directed.

Supply and fix in repair CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge .

S&F stainless steel towel rack fixed to wall with CP brass screws complete all as specified and as directed.

S & F CP Towel rail 20 mm dia and 60 cm long complete all as specified and directed

S&F in repair stainless steel kitchen plate rack overall size 900mm x 900mm make out of 0.80mm thick stainless steel sheet etc complete all as specified and as directed

S&F in repairs 100 mm long, Aluminium handles, cast type, anodised complete all as specified and as directed

S&F in repairs 150 mm long, Aluminium handles, cast type, anodised complete all as specified and as directed

S & F in repairs 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed

S & F in repair Aluminum siliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts for on bolts plate and two on staple plate and fixed 250 mm long etc complete all as specified and as directed

S&F in repair MS Butt hinge 75mm ,Cold Rolled Medium weight complete all as specified and directed.

S&F in repair MS butt hinges, cold rolled medium weight 100mm in size complete all as specified and directed.

S & F in repair 75 mm size aluminium anodised Hasp and staple, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Dismantling Asbestos cement ,galvalume fiber sheet ( Plan corrugated,semicorrugated, etc.) sheets in roof coverings all as specified and directed

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Dismantling of timber scantling 40 sqcm and over for framed work and over in section, in any position complete all as specified & directed.

S&F Roof trusses (Framed), trussed, purlin, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle Channel or flat sections) including distance pieces cleats etc of Fe-410-W (Gde -E-250) Quality B complete all as specified & directed.

S & F in repair 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white complete all as specified and as directed.

S&F in repair 18/19 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white, fixed with screws to timber frame work including teak wood lipping of exposed edges of and including polishing on it complete as in kitchen cabinet and bed room shutters or in any type complete all as directed.

S&F 125 mm overall size Haps and staple safety type ,aluminium anodised with mild steel hinge pin incl bolt to hinge plate and fixed etc complete all as specified and directed.

S&F continuous piano hinge mild steel 30 mm width flap when open mild steel , bright finish or electrogalvanised etc complete and as directed.

S & F of 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal,moisture resistence,anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading etc. complete all as specified and directed by Engg-in-charge.

Supply & Fixing 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed.

Supply & Fixing stainless steel basket (plain) of approved quality of size 520 x 485 x 100 mm complete all as specified and directed.

Supply & Fixing stainless steel plate basket of approved quality of size 520 x 485 x 150 mm complete all as specified and directed.

Supply & Fixing stainless steel cup & saucer basket of approved quality of size 520 x 485 x 100 mm complete all as specified and directed.

Supply & Fixing stainless steel glass basket of approved quality of size 520 x 485 x 150 mm complete all as specified and directed.

Supply & Fixing stainless steel two shelf pull out basket of approved quality of size 520 x 485 x 150 mm complete all as specified and directed.

Supply & Fixing of stainless steel cutlery basket of approved quality of size 520 x 485 x 100 mm complete all as specified and directed.

Supply & Fixing in repair of basket/ trolly channel 500mm long extruded MS galvanised over roller as per site required to make funcontional complete all as specified and directed.

S &F ball bearing runners 45 mm telescopic ( KTS- 20) full extension load capacity 50 kgs and fixed etc complete all as specified and direcetd.

S &F auto closing hinges 35 mm o crank ( KH-001) Or 8 crank ( KH-002) openable at 110 degree for kitchen cabinet shutter and fixed etc complete all as specified and direcetd.

S&F in repair false ceiling with Gypsum Board 10-12 mm thick fixed with clips & screws including anodised aluminium snap grid frame work for false ceiling of Tee/Angle of weight not less than 300 gm per RM with slot for fixing including necessary suspender of flat iron or 4 mm dia bars of required length fixed in purlin of roof not exceeding 1.20 m both ways including all accessories required with putty and any colour for suspending ceiling work and gypsum board complete all as specified and as directed by the Engineer-in-Charge.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor included cost of glass and includes all other connected accessories.) etc complete all as specified and direcetd.

S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

M/S RAJ KUMAR SINGH (BID ID -3273792)

M/s Ravi Traders (BID ID -3273783)

Ms Vinay constructions (BID ID -3275446)

M/S OM Enterprises (BID ID -3275718)

M/S Chadha Brothers (BID ID -3274636)

VEER SINGH CONSTRUCTION (BID ID -3273871)

SHRI HARI CONSTRUCTION (BID ID -3275310)

M/S ARVIND SINGH THEKEDAR (BID ID -3274631)