Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.4 LAccepted-AOC | L1 | Accepted-AOC Being First Lowest | |
| 2 | L2₹13.8 L+₹1.2 L (9.36%)Rejected-Finance A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹14.0 L+₹1.3 L (10.3%)Rejected-Finance | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹16.5 L+₹3.9 L (30.5%)Rejected-Finance | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹17.0 L+₹4.3 L (34.4%)Rejected-Finance | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
17 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jaipur
GE Jaipur
PERIODICAL SERVICES AND MISC B/R REPAIRS TO OTM ACCN IN ZONE-II AREA UNDER AGE B/R-II OF GE JAIPUR
2023_MES_604179_1
GE/J-19/2023-24
Open Tender
Civil Works
Item Rate
335 days
GE Jaipur
As per Tender Documents
5 documents required · 5 mandatory
₹500
GE Jaipur
₹50,000
Yes
11 Aug 2023
19 Jun 2023
19 Jul 2023
19 Jun 2023
17 Jul 2023
3 Jul 2023
Amount
M & L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surface and applying two coat of white wash complete all as specified and directed
M & L for preparation of old plastered or unplastered decorated surfaces of ceiling and applying two coat of white wash complete all as specified and directed
S&F complete removal of existing treatment of old plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted as directed complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint of approved tint all as specified & as directed.
M&L preparation of old painted surfaces of wood or wood based materials over 10 cm width or girth of any description & applying two coats of synthetic enamel paint complete all as specified and directed
S&F complete removal of existing treatment of walls and applying two coat of cement base paint (Ist quality) in plain pattern on walls over and including a coat of alkali resistant priming paint complete all as specified and directed
S&F complete removal of existing treatment and applying two coat of weather proof paint on walls incl. wall care putty where required and fill the pin holes through putty complete all as specified and directed
Dismantling of cement concrete tiles, glazed tiles, terrazo tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and thrown of rubbish outside MOD land complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material outside of MD Land complete all as specified and directed.
Taking down cement plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish outside MD land complete all as directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
M & L for vitrified ceramic tiles 9-10mm thick (square/rectamgular) polished, area of each tiles exc. 0.36 sqm but n exc 0.42 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over and including 15mm thick screed in cement mortar 1:6 complete all as specified and directed
M & L for vitrified ceramic tiles 9-10mm thick (square/rectamgular) polished, area of each tiles exc. 0.36 sqm but n exc 0.42 sqm on vertical surfaces such as skirting, dados and risers to steps, wall etc set over and including 10 mm thick cement plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match colour of the tile complete all as specified and directed.
M&L Non- skid coloured ceramic tiles 300 X 300 X 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over and including 15mm thick screed in cement mortar 1:6 complete all as specified and directed
M&L for coloured Glazed ceramic tiles (300x450 x 7mm thick), on vertical surfaces such as skirting, dados and risers to steps ,wall etc set over and including 10 mm thick cement plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match colour of the tile complete all as specified and directed .
M&l for brick work with sub class B bricks straight or curved on plan exc 6m mean radius brick walls built in CM 1:6 complete all as specified and directed .
Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed .
M & L for sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exc.0.5sqm in each pane complete all as specified and directed .
S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.
S&F 30mm thick Flush shutter, solid core construction with block board core and plywood face panel, commercial type on both faces complete all as specified and directed .
S&F25 mm thick preliminated particle interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screwed to timber frame work as in shelves in kitchen, almirah, cup boards complete all as specified and as directed by Engineer-in-Charge.
S & F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing as applicable to item 08095 given in SSR Part – II (2020) complete all as specified and directed.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part – II complete all as specified and directed.
S&F 100mm Butt hinges, stainless steel with screw complete all as specified and directed.
S&F 150mm aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm long aluminium alloy handles cast type complete all as specified and directed
S & F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified and directed.
S&F 250mm long stainless steel sliding door bolt plate type stove enameled bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed
S&F stailess steel pressed handles oval type stove enamelled of 150mm size complete all as specified and directed.
S&F wire netting of stainless steel wire 1.4 mm dia fixed with tinned tack of stainless steel wire staples complete all as specified and directed.
Taking up or down, 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engineer -in-charge.
S&F 15 mm dia galvanised iron tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling or laid in floors complete all as specified and directed by Engineer -in-charge.
M&L for cutting chases, pinning in making good to facings where requried and pointing in cement mortar 1:3 to ends or edge of landings, steps, cills, sunshade, shelves, lintel etc. and for tubes or concealed conduit etc. and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-charge.
S&F in repair vitreous china wash down water closet (squatt pan ) white, orissa pattern size 580X440mm with integral foot rest (excluding flushing cistern and flush pipe) including P trap complete all as specified and directed by Engineer-in-charge.
S&F 110mm PVC (SWR) WC connector with lip ring complete all as specified and directed by Engineer-in-charge.
S&F in repair vitreous china wash down water closet pan (pedestral pattern), white (excluding flushing cistern and flush pipe), including P or S trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed by Engineer-in-charge.
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level or high level 10 ltr capacity, white, with intel, ball valve, float and handle including brackets, flushing pipe complete all as specified & directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed.
S&F in repair 75mm dia cast iron floor trap incl. CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) and removing of old trap any type and shape Complete all as specified
S&F in repair angle valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, complete all as specified and as directed by Engineer-in-Charge.
S&F in repair tubular towel rail, 600mm long of cast copper alloy, chromium plated, fixed complete all as specified and directed by Engineer-in-charge.
S&F in repair vitreous china wash hand basin, white, flat back of size 580x450mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM excluding traps, waste pipe complete all as specified and directed by Engineer-in-charge.
S&F in repairs waste pipe 32mm for WHB with coupling complete all as specified and directed by Engineer-in-charge.
S & F in repair of center hole wash hand basin mixer, brass (cast copper alloy) chormium plated, mixer for mixing hot & cold water, screwed down for iron pipe 15 mm bore including taking down old one any type complete all as specified and as directed by Engineer-in - charge Note : The minimum weight of valve shall be as given in SSR or in rellevant IS
Dismantling of water tanks of capacity exc 250 and n.exc 500 ltrs and removing from site all as specified and directed.
Dismantling of water tanks of capacity exc 500 and n.exc 1000 ltrs and removing from site all as specified and directed.
S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified in SSR Part I, complete all as specified and directed.
S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified in SSR Part I, complete all as specified and directed.
S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed for 15mm dia pipe complete all as specified and directed. Note: Minimum weight 15 mm - 142 gms
S&F 150mm Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate complete.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store complete all as specified and directed by Engr-in-Charge. Note : Measured over all as fixed along the cente line over fittings and accessories)
S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls all as directed.
S&F in repair Brass chromium plated shower rose 300 mm size including fixing to steel pipe or union fixed complete all as specified and directed.
M&L for 16-18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone, size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed.
M&L for providing precast cement concrete louvres and jallies, type B0 1:2:4 using 12.5mm garded aggregate set in CM 1:4 including Pillars for finsing at regular interval and taking down old one of 25mm thick (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item
S & F galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-In-Charge.
S&F in repairs 15 mm bore pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engr-In-Charge..
M&L water proofing treatment to roof surface by applying with a coat of cold aplied bituminous primer @ 0.40 ltr/Sqm conforming to IS-33894 and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5kg/sqm, reinforced with polyester non woven fabric (weighing not less than 150gms/sqm) shall only be used. It shall be laid by torch application. Side over laps shall be 75mm and the end lap shall be 100mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet groove. This shall be finished by a membrane flashing including a coat aluminuium paint over APP membrane as per manufacturer instructions.
Taking down existing roof treatment complete including PCC and properly clean the surface to remove loose particles with wire brushes and removing the debris out side of MoD Land complete all as specified and directed by Engr-In-Charge
M&L for screed plaster 15 mm thick in CM 1:4 on roof surface complete and finished the surface even and smooth without using extra cement etc. complete all as specified and directed
M&L for screed plaster 15 mm thick in CM 1:6 on brick or concrete surface of wall finished the surface even and smooth without using extra cement etc. complete all as specified and directed
S&F Preparation of newly plasterd surface of wall and applying two coat of cement base paint (Ist quality) in plain pattern on walls and over a coat of alkali resistant priming paint complete all as specified.
Dismantling false ceiling board or insulation board etc, any thickness including snap grid frame etc complete all as specified.
S&F in repair anodized aluminium snap grid frame work of size 605 x 605 mm for false ceiling including and providing 12 mm thick medium density Fibre boards exterior grade fixed with timber,framed work with screw as per specification alll as specified and directed by Engineer-in-Charge.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
Akhil Enterprises
Rakesh Choudhary Contractor
Deep Construction Company
S.R.Enterprises
Sh. Manoj Nagar
J.J.ENGINEERING
C.P.Computers
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .