c/o of RCC Protection wall and paver block road

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or sqm on plan) , including dressing of sides and ramming of bottom , lift up to 1.5m , including getting out the excavated soil and disposal of surplus excavated soils as directed , with in a lead of 50 m Hard rock (blasting prohibited)

Providing and laying in position cement concrete of specified grade excluding the cost of centering , shuttering, -all work up to plinth level 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering , shuttering, finishing and reinforcement-all work up to plinth level 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in wall (any thickness ) , including attached pillasters, buttress,plinth and string courses, fillets , coloumns ,pillars , piers, abutments, post and strut etc above plinth level up to floor five level , excluding cost of centering , shuttering ,finishing and reinforcement : 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting , propping etc and removal of form for foundation ,footing, base of coloumn etc for mass concrete .

Centering and shuttering including strutting , propping etc and removal of form for wall( any thickness) including attached pillasters , butteresses, plinth and string courses etc.

Steel reinforcement for RCC work including straightening, cutting , bending , placing in position and binding all complete up to plinth level : Thermo mechanically treated barof grade Fe-500D or more

Steel reinforcement for RCC work including straightening, cutting , bending , placing in position and binding all complete above plinth level : Thermo mechanically treated bar of grade Fe-500D or more

Providing and laying factory made chamfered edge cement concrete paver blocks in foothpath , park, lawans, drive ways or light traffics parking etc, of required strength thickness & size/shape made by table vibratory method using PU mould , laid in required colour & pattern over 50 mm thick compact bed of sand compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joint with sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand . complete all as per direction of engineer-in-charge . 80 mm thick CC paver block of M-30 grade with approved color design and pattern.

20 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand)

Distempering with 1st quality acrylic distemper ( ready made ) having VOC content less than 50 gms /ltr , of approved manufacture , of required shade and colour complete , as per manufacture's specification . Two or more coat on new work

M/s Boria Engineering Construction

M/s MAA KR Enterprise