REPAIRS TO BOUNDARY WALLS,COMPOUND WALLS,DRAINS, FENCING,HARD STANDING AND OTHER MISC WORKS ETC AT OG LINES OF AGE B/R H/L UNDER THE AOR OF GE DEOLALI

Amount

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for brick work with fly ash old size bricks, straight or curved on plan n.exc 6m mean radius, built in cm 1:6 complete all as specified and directed.

M & L for except brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius with old size bricks in CM 1:6 complete all as specified and directed.

M & L for walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

All as per sr. item No.4 above but except stone

Extra for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to random rubble walling,uncoursed or brought upto courses

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc.

M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 all as specified.

M & L for Rendering 15mm thick in CM 1:4 on fair faces of stone masonary work or surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on brick masonry wall in cement mortar 1:4 finishing the surfaces even and smooth( without using extra cement) complete all as specified.

M&L for applying two coats of cement base paint over chalk whitening over newly plastered surfaces of walls including preparation of surfaces all as specified.

M & L for applying two coat of white wash over preparation new surface of walls including preparation of walls etc complete all as specified.

Dismantling of posts or struts(wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground all as specified and directed.

Dismantling of fencing wire mesh of any type complete all as specified and directed.

M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil.

M & L for cement concrete Type B2 1:4:8 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified.

S & F in repais galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standards rails straining bolts including securing or tying at crossing with & provn of galvanized mild steel wire complete all as specified and directed. (Each line wire to be measured)

M & L for RCC 1:2:4, type B-1, (using 20mm graded stone aggregates) as in precast fencing posts, stuts etc area exc 100 & not exc 250Sqcm including form work etc complete all as specified:- (Reinforcement shall be measured and paid seperately.)

S & F 10mm dia TMT bars and over cut to lengthbent to shape required including craking bending, spirally for hooping for columns, hooking ends and binding with mild steel wire ( annealed) not less than 0.90mm dia of wire or secruing with clips all.

All as sr. item No. 19 above but 6mm dia and over up to 8mm dia in stirups, spaces etc complete all as directed.

Supply only chain link MS galvanized fencing of any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire

S & F mild steel bolt screwed one end with hexagonal or square nuts & washers the other end enlarged not exc 15cm long dia of neck 12mm complete all as specified and directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

S & F mild steel flat iron, round or square bars, in available lengths, Fe-290, Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed.

M&L for Providing, cement concrete type B1 1:2:4 using (20mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses,parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all complete all as specified and directed

M&L for cement concrete type B0 (1:2:4) using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any description and in any position complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for .Note- Rate includes for reinforcement cutting as required to facilitate demolition.

M&L for providing RCC (1:2:4) using 20mm graded stone aggregate as in coping, slab supported on wall, beam, lintels including form work etc complete all as directed by Engr in charge.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified and directed.

M & L for Providing precast cement concrete louvres and jallies Type BO 1:2:4 using (12.5mm graded stone aggregate) Set in cement mortar1:4 , 30 mm thick (measured solid ), including all mouldings but excluding frame as directed by Engr in charge.

M & L for 75 mm thick Cement concrete type C-2, 1:3:6 using (40 mm graded stone aggregate ) as in Plinth protection.

Supply and fix for framed work as in doors or gates of angle or other section with gusset Plate, rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conf. to Fe-410-0 or Fe-310-0 all as specified and directed. Note : Distrubed surfaces of wall shall be made good to true surface.

Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc Complete all as specified.

M&L for Glazed ceramic coloured tiles of size. 350x250x7mm/450x350x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M & L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 10mm thick screed bed in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rubber moulded with grey cement and pigment, including 15mm thick scred in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

M&L for precast cement concrete interlocking tiles 60 mm thick Rubber mould with strength 35 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and directed.

M & L for precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggreates) set in CM 1:4 as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) complete all as specified and directed.

S&F 10mm dia MS Round bars as in support of Chain Link Fencing all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

M & L for Cement concrete Type B2 1:2:4 ( using 40 mm graded stone aggregate) in foundations, filling and mass-concrete.

M & L for applying two coat of synthetic enamel paint on old stone or concrete surface of any description, not otherwise described, over 10 cm in width or girth complete all as specified.

Dismantling PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and directed by Engr-in charge..

S&F PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends with access door 110 mm dia complete all as specified and directed.

Ditto all as per sr. item No 52 above but 75 mm dia.

S&F PVC (SWR) plain bend 110 mm dia complete all as specified and directed.

S&F PVC (SWR) plain bend 75 mm dia complete all as specified and directed.

S&F PVC (SWR) branch piece single or double T equal or unequal with access door 110 mm dia complete all as specified and directed.

All as per sr. Item No 56 above but 75 mm dia.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

Note: Amount of sch of credit of Rs.70,415.00/-will be deducted from total amount of BOQ.

M/S MANISH CONSTRUCTION CO

Srujan Associates

M/S R.K.S. CONSTRUCTION

Kaushalya Buildcon

J Sams Contructions

M/S Chandan Construction Company

SHYAM CONSTRUCTION