RAISING THE HEIGHT OF THE BOUNDARY WALL WITH GRILL FENCING ON IT AT THE TOMBS OF THE SARDHANA CEMETERY SARDHANA

ITEMS TO BE EXECUTED

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing 20mm thick plaster in lime surkhi mortar in 1:1:1 (i lime : 1 surkhi : 1 C sand) with adhessive materials like Gur, Belgiri, Gum and San including carriage of water and materials with in a lead upto 50m and lift upto 4.00m.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Provision for engagement of Casual Beldar for Carriage of material from Material site to working site approximate lead 100 mtr and cleaning the site during execution work

Provision for Hiring Charges of Water Tanker (5000 Ltr) capacity which are required during the execution of work

Disposal of moorum/building rubbish/malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved Municipal dumping ground for lead upto 15 Km for all lifts.

Providing and fixing MS gate double panel of size (3.98X2.13m) with angle iron frame 50x50x6mm with MS 20mm sq bar piercing through holes @10cm c/c with MS flat 50x6mm and pointed at the top including hanging and locking arrangement all complete including cutting, hoisting, fixing in position with all necessary bolts etc

Provision for 10 cm cutting the undulated area and filling depression and low laying area also including removal of loose broken brick and levelling dressing ramming complete.

Provision for Engagement of Casual Supervisor for supervision of S/R work due to shortage of technical staff

Purchase of Cycle Rikshaw with heavy duty tyre & tube which are required during the execution of work.

Provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. The size of the over all pit is 8.00M x 3.00M & depth is 0.90M. The pit is divided in to three parts & cement plastered.

Provision for drawing & Photo Documentation charges before, during & after Completion of Work.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required ( In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works )

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

sovereign enterprise

POOJA CONSTRUCTION