Infrastructure of State Pharmecy Institute, Baraiatu, Ranchi

Amount

(Providing and fixing factory made 18mm thick single extrum WPC (Wood Polymer Composite) solid plain white color board Jall, CNC (Computer numeric control) routed of approved design by Engineer - in - charge which are machine cut for duct / shaft covering. Partitions and facades comprising of virgin polymer of K value 58 - 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg / cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N / mm2, modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A category with properties of being termite / borer proof, water / moisture proof and fire retardant and fixing on M. S (mild steel) frame made of 25x25x1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grld made at 1. 0 x 1. 0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc. , all complete as per direction of Engineer - In - Charge. (Note: M. S (mild steel) framework with priming coat and necessary ss fasteners and ssscrews shall be paid separately

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position:

Second class teak wood

Providing aand fixing flat pressed 3 layer particle board medium density exterior grade (Grade -1) or graded wood particle board IS: 3087 marked, to frame , backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)

18mm thick

Providing and fixing ISI marked flush door shutters decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete

2nd class teak wood - 50X20mm

Providing and fixing bright finished brass butt hinges with necessry screws etc. complete

100X70X4mm (ordinary type)

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete

Size 40mm

Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete.

Providing and fixing Chromium plated brass handles with necessary screws etc. complete - 100mm

Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resionus wood and plywood

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade

Two or more coats on new work over an under coat of uitable shade with ordinary paint of approved brand and manufacture

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :

Screened through sieve of I.S. designation 16 mm

Rough dressing the trenched ground including breaking clods.

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Fine dressing of the Ground.

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

With grass Turf

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately):

Holes 1.2 m dia and 1.2 m deep.

Holes 90 cm dia, and 90 cm deep.

Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level. The vertical members shall consist of four nos angle iron of size 25x25x3 mm, 1.8 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. The vertical mambers shall be welded to 4 nos 25x6 mm M. S. flats placed horizontally around the vertical name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect.

TREES PLANTS

Azadirachta indicia ( Neem ) height 120-130cm in big polybag size 25 cm

Bauhinia blakeana (Kachnar) height 120-150 cm. in big poly bag size 25 cm

Bottle palm ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bag

Cassia fistula (Amaltash) height 120-135 cm. in big poly bag size 25 cm

Cassia javanica height 120-150 cm. in big poly bag size 25 cm

Dalbergia sissoo (Seasam) height 120-135 cm. in big poly bag size 25 cm

Phyllanthus emblica (Amla) height 150-165 cm. in Big HDPE Bag

Plumeria alba height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bag

Polyalthia longifolia (Ashok) height 150-165 cm. in earthen pot size 25 cm

Polyalthia longifolia (Ashok) height 180-195 cm. in gunny bag size 30 cm

Polyalthia pendula (Ashok Pendula) height 150-165 cm. in earthen pot size 25 cm

Pterospermum acerifolium (Kanak Champa) height 150-165 cm. in big poly bag size 25 cm

Putranjiva roxburghii height 90-105 cm. in big polybag size 25 cm

Saraca indica (Sita Ashok) height 105-120 cm. in big poly bag size 25 cm

Schleichera trijuga (Kusum) height 150-165 cm. in big poly bag size 25 cm

Eugenia jambolana (Jamun) height 150-165 cm. in big poly bag size 25 cm

Tamarindus indica (Imli) height 120-150 cm. in big polybag size 25 cm

Tectona grandis (Teak) height 150-165 cm. in big polybag size 25 cm

ORNAMENTAL PLANTS

Providing Plant Dahlia single in different colour with fresh & healthy foliage well developed with 6 to 8 half blooming buds in 20 cm Earthen Pot/Plastic Pot.

Providing Plant Daisy well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/Plastic Pot.

Providing Plant Petunia hybrid different variety in different colour well developed with fresh and healthy foliage in full bloom in 25 cm Earthen Pot/Plastic Pot.

Providing Plant Salvia red Hybrid dwarf variety having 15 to 23 cm ht., specimen 6 plants with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/ Nand

Providing Plant Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot,

Washingtonia filifera palm well developed 90 to 105 cm ht. plant having 5 to 6 straight fresh and healthy leaves in 35 cm Cement Pot

SHRUBS

Supply and stacking of plant Cassia biflora of height 45-60 cm. in earthen pots of size 20 cm

Supply and stacking of plant Ficus panda of height 30-45 cm. with 3-4 branches and healthy foliage in p.bag of size 20 cm

Supply and stacking of plant Hamelia patens of height 30-45 cm. with 3-4 branches in poly bags of size 20 cm

Supply and stacking of plant Hibiscus variegated of height 60-75 cm. with healthy variegated foliage in earthen pots size 25 cm

Supply and stacking of plant Hibiscus variegated of height 60-75 cm. with healthy variegated foliage in earthen pots size 25 cm

CREEPER PLANTS

Allamanda cathartica plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots

Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan, Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots.

Clerodendrum splendens plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots

Quisqualis indica plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots

FOLIAGE/SHADE LOVING PLANTS

Providing of Areca Palm plant, having ht. 1.20 m to 1.50 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot.

Providing of Areca palm plant, having ht. 1.50 m to 1.80 m with 6 to 8 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot.

Providing of Croton Golden plant, having ht. 45 cm to 60 cm with 2 to 3 branches, well developed, fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot.

Providing of Diffenbachia Tropicsnow plant, having ht. 60 cm & above with 8 - 10 leaves, well developed, fresh & healthy in 25 cm size of Earthen pot / Plastic pot.

Providing of Draceana Song of India Green plant (three in one), having ht. 30 cm, well developed, fresh & healthy, lush green foliage from bottom to top in 20 cm size of Earthen pot / Plastic pot.

Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.

Group-C

Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.

Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5 Sqmm + 1x1.5 sqmm earth wire(for Single Separate 5A from nearest switch board)

2x2.5 Sqmm + 1x2.5 sqmm earth wire (for switch board circuit).

2x6.0 Sq.mm + 1x6.0 Sq.mm earth wire.

4x10 Sqmm +2x10 sqmm earth wire.

S/F PVC Conduit: Supplying and fixing of following sizes of Rigid 2 mm thick PVC conduit alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required for TV and TEL out lets.

S/F Modular type Switch / Socket:- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. (to be used in switch board with sockets)

5/6 amps, one way modular switch

5/6 amps, 3 pin modular socket

S/F Modular type electronic fan regulator:- Supplying and fixing stepped (two module) type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

S/F Modular blanking plate:- Supplying and fixing of the existing modular plate and switch box excluding modular plate etc, as required.

S/F Modular boxes, base and cover plate:- Supplying and fixing following size /modules G.I. box along with modular base and cover plate for modular switches in recess etc. as required

1 or 2 modules (78mmx78mmx45mm)

4/5 modules (78mmx140mmx50mm)

S/F light plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required.

S/F power plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.

S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.

S/F Batten / Angle Holder:- Supplying and fixing batten / angle holder including connection etc as required.

Erection on incandescent light fitting :- Erection of wall bracket/ceiling fittings of all sizes and shapes containing upto two GLS amps per fitting, complete with all accessories including connection etc as required.

ITC fluorescent fitting directly on surface:- Installation, testing and commissioning of Pre-wired fluorescent fitting /compact fluorescent fitting of all types, complete with all accessories and tube etc.directly on surace or ceiling/ wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

ITC fluorescent fitting with down rods/CHAIN :- Installation, testing and commissioning of Pre-wired fluorescent fitting /compact fluorescent fitting of all types, complete with all accessories and tube etc.directly on surace or ceiling/ wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper conductor, single core cable and earthing including supplying and fixing ball & socket arrangement, 2 No. down roads of 20 mm dia x 1.6 mm thick steel conduit (up to 30 cm lenght), painting & wiring the down rods with 1.5 sq.mm. PVC Cu. conductor sinlge core cable and earthing etc. as required.

ITC Ceiling Fan :- Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC insulated,copper conductor,single core cable etc, as required.

ITC Exhaust Fan upto 450 mm sweep:- installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required.

S/F rewireable Double/TP & N Switch Disconnector (SFU):- Providing, fitting, fixing, installing and testing of Switch Fuse Unit of double pole/ TP & N conforming to IS:- 13947-3 of following current rating rewireable porcelain fuse type complete with metal enclosure to be mouned on wall with iron flat 32mmx5mm with G.I. Nut bolts etc. as required and as per the direction of E/I. Make- Havells/HPL/ Standard.

63A TP & N SFU (Pump Room)

S/F Bus Bar Chamber Providing, fitting, fixing, installing and testing of TPN Bus Bar conforming to IS:- 13947-3 of current rating 100 A TPN with 4 Nos. copper bus having capacity of 100A complete with metal enclosure to be mouned on wall with iron strip 32mmx5mm with G.I. Nut bolts etc. as required and as per the direction of E/I. Make- HPL/Havells/ Standard.

100A (for Pump Room)

(DISTRIBUTION BOARD & MCB/RCCB) S/F SP MCB DB:- Supplying and fixing following way, SP&N MCB distribution board of sheet steel for 240 Volts on surface /recess complete with tinned copper bus bar, neutral busbar, earth bar, detachable gland plate, interconnections, phophatized and powder coated painted including earthing etc. as required ( But without MCB/RCCB/ ISOLATOR).

8 Way Double Door

12 Way Double Door

S/F TP MCB DB: Supplying and fixing following way,three pole and neutral sheet MCB distribution board, 415 volts on surface/recess complete with tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections,phosphatised and powder painted including earthing etc. as required ( But without MCB/RCCB/ ISOLATOR).

6 ways (4+18) Double Door. (horizontal type)

S/F 'C' series MCB:- Supplying and fixing 240/415 V, 10 kA, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.

6/32A Single Pole

6-32 A DP MCB

40A DP MCB (To use as incomer for all SP MCB DB)

50/63A TPN (To use as incommer for all TPN D.B.)

Supply & fixing 20A SPN MCB Industrial Socket Outlet:- Supply and fixing of 20A, 240V, SPN insustrial type socket outlet with 2 poles and earth, metal enclosed plug top along with 20 amps 'C' series, SP MCCB, in sheet steel enclosure, on surface or in recess with chained metal cover for socket out let and complete with connections, testing and commissioning etc as required.

P/F MV Danger Notice Plate:- Providing and fixing M.V. danger notice plate of 200mmX150mm, made of mild steel at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in the single red colour on front side as required.

S/L 6 SWG G.I. Wire :- Supplying and laying of 6 SWG G. I. Wire at 0.50 Mtrs. Below ground level or along the wall for conductor earth electrode, including soldering etc, as required.

P/F 25 x 5mm G.I. earth strip in surface/recess :- Providing and fixing 25mmx5mm G.I. earth strip in surface /recess for connections etc. as required and making the earth grid for all G.I. Earthing pits of the building.

MV Cable Laying up to 35 sq. mm. in ground :- Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35 sq.mm. direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

MV Cable Laying up to 95 sq. mm. in ground :- Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size exceeding 35 sq.mm. but not exceeding 95 sq.mm. direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required

MV Cable Laying up to 400 sq. mm. in ground ;- Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size exceeding 185 sq.mm. but not exceeding 400 sq.mm. direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

MV Cable Laying up to 95 sq. mm. in same trench :- Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35 sq.mm. but not exceeding 95 sq.mm. direct in ground in the same trenchin oe tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.

MV Cable Laying up to 400 sq. mm. in same trench :- Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 185 sq.mm. but not exceeding 400 sq.mm. direct in ground in the same trenchin oe tier horizontal formation including excavation, sand cushioning, protective covering by 2nd class bricks and refilling the trench etc as required.

11 KV cable laying up to 120 Sq.mm. in ground :- Laying of one number PVC insulated and PVC seathed/ XLPE power cable of grade exceeding 1.1KV but not exceeding 11 KV of size not exceeding 120 Sq.mm. direct in ground including excavation sand chshioning, protective covering and refilling the trench etc. as required.

Supplying and making cable route marker with cement concrete 1:2;4 of size 60mm X 60mm at the bottom and 50mm X 50mm at the top with a thickness of 10 cm including inscription duly engraved as required.

Errection of Steel Tubular Pole up to 10Mtr. in C.C.:-

Errection of Steel Tubular Pole of length exceeding 8 meters but not exceeding 10 meters in cement concrete 1:3:6 (1 Cement, 3 coarse Sand, 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. (Errection shall be done as per drawing attached)

Providing and fixing of PVC/XLPE indulated PVC sheathed heavy duty , aluminium armoured cable of grade 1.1KV as per IS 1554 (Part-1), etc. as required. Make:- Havells / Finolex / Polycab/KEI.

2 Core 6 Sq.mm. XLPE Al. Ar. Cable 1.1kV.

4 Core 16 Sq.mm. XLPE Al. Ar. Cable 1.1kV.

3.5 Core 25 Sq.mm. XLPE Al. Ar. Cable 1.1kV.

3.5 Core 70 Sq.mm. XLPE Al. Ar. Cable 1.1kV.

3.5 Core 185 Sq.mm. XLPE Al. Ar. Cable 1.1kV.

3.5 Core 300 Sq.mm. XLPE Al. Ar. Cable 1.1kV.

Providing of following dia GI pipe (Medium Class) in ground complete with G.I. fittings etc. as required.

Laying of Med. Class G.I.Pipe earth cutting, excavation and refilling and making the surface smooth.

Supply fitting, fixing and testing of surface/ pendent mounted with chain Batten type LED 4ft Tube light fitting with Housing & cover made up of CRCA sheet steel. Cover is fixed to the housing by means of 2 Nos. bolt with engineering plastic head along with 1 nos LED tube of 20/22W Each of luminous efficacy of efficacy >110 Lm/W. ,Lifetime of 30,000 burning hours, LM 79 and LM 80 reports need to be submitted with all accessories. Make :- .Trilux/ Wipro/ Philips/ Havells.

Supply, fitting, fixing & testing of Special type Energy saving new generation 9 W/10W LED bulkhead luminaire with opal diffuser. Operating Voltage Range of 120-277V AC, 600 Lumen, LM 79 and LM 80 reports need to be submitted from NABL accredited lab to verify above parameters with all accessories. MAKE- Philips /Trilux/Wipro/Havells.

Supply of Swaged Steel Tubular Pole ( 410SP-26) of height 9 Mtrs. Confirming to IS:- 2713 (part-2) in three section with steel base size, bottom of the pole made of 50mm dia MSB Clamps pipe welded to 300 mm long MS Canopy of suitable dia at an angle of 102.5 suitable size of nut bolts including rating of one coat steel primer and two coats of red oxide all complete as required (without arm) ( with base plate (300 mm x 300 mm x 6 mm) properly welded and size of pole shall be Bottom- 165.1X 4.50, Middle- 139.7X4.50 and Top- 114.3X3.65)

Cost of Swaged Steel Tubular Pole ( 410SP-26) of height 9 Mtrs. Confirming to IS:- 2713 (part-2)

Supply fitting, fixing of Single Arm (1 Mtr. Long) Cost of Single arm (1 Mtrs. Long)

Silent type DG Set of capacity 82.5 KVA With AMF Panel IS/IEC-60034-1

Supply, fitting, fixing, installation and testing of 82.5 KVA Silent D.G. Set, 415 Volts, 3 Ph. Silent Diesel Generator Set confirming to IS:10001/10002 AC supply complete with engine (1500 RPM) and alternator DG Set controller confiring to IS:13364 with accessories including residential type silencer and fuel service tank, battery, nattery leads, battery charger with all accessories, including MCCB of suitable rating & standard set of tools and anti-vibration mounting pads, etc. The power command controller compactable with BMS, PC & PLC compelte as required, remote mointoring and data logging with digital voltage regulator through inbuilt AVR, digital governing including protection complete as required. :- Make:- Jakson India Ltd, KOEL GREEN (KIRLOSKAR), Sterling & Wilson Power Gen Pvt. LTD. 82.5 KVA MANAUL, ITC , (2 YRS, MECHANICAL WARANTY)

Providing & installing of complete control cables between DG Set & Main LT Panel to make system autiomatic complete as required. (ONLY CONTROL CABLE)

Supply of company make acoustic enclosure for 82.5 KVA CPCB approved Acoustic enclosure with 80 mm MS base plate, 2 mm CRCA sheet, 50 mm thick foam / 100 mm Rock Wool Insulation, 14 surface tank treatment, dully powder coated and painted with suitable colour with integrate Fuel Tank, services door, louvers (Fresh Air / Radiator), 1020 dia residential type Silencer, dimension as per company specification, complete with following accessories :-

a) Fuel Tank.

b) Batteries, battery leads and battery charger.

c) Residential Silencers.

d) First fill of lube oil.

e) AVM Pads.

In above supply item following work are also included :- i) Installation, fitting, fixing, testing and commissioning of the same. ii) Civil part for commissioning of D.G. Set iii) Installation of Exhaust system for D.G. Set shall be as per Central & State Pollution Board Norms along (C.P.C.B.) with iron structure i.e. 5 mtr. above the height of nearest building. If this will be in the scope of the contractor then charges shall be extra and that will be the actual. iv) Test run for D.G. Set without load and with load (part wise ) at least 6hrs each time.

Supply of inbuilt Control Breaker ( thermomagnetic suitable capacity of 250A MCCB with spreader links & rotary handle) and all type of meters (Voltmeter, Ammeter, KW/m, Hz/m) and all protection indications with alarm and with suitable arrangement for 1R 150 Sq mm 3.5 Core Al. Ar. Cable etc as required.

Total Cost of 82.5 KVA SILENT DG SET (GST )

250KVA, 11/0.433KV OUT DOOR TRANSFORMER (OFF LOAD TAP CHANGER)

Supply, installation, testing, fixing and commissioning in correct alignment position, effecting proper connections of continuous rating of 250 KVA, 3Ph, 50Cy, 11/0.433KV, Off Circuit, (OCTC) oil cooled, copper wound, Outdoor Transformer, at full load and temp. rise not exceeding 45 degree C, by termometer in oil and 50 Degree C. by the reistance in windingafter continuous run in full load rating. The Transformer shoul oil immersed winding having Vector DY-11 HT side connected in Delta, & LT Side connected in Star with neutral brought out connected to provide separate earthing. In Transformer HT Side Bushing/ Cable End Box, & LT side - Cable End Box. Transformer shall be latest manufacturing standards as per amended IS Specifications and load and no load losses shall be limited to the values given below as per IS or Norms issued by JSEB or which ever is lower. The transformer , . length of MS channels as per the norms of 250 KVA Outdoor Transformer with all accessories as per IS:2026, air filled cable box and accessories as per General Specifications of 250KVA out Door Transformer and should have suitable for 11KV 1 Run, 3 Core 70 Sq mm XLPE Al. Ar. Cable and LV termination box shall have suitable arrangement for 1.1 KV, 1 Run, 3.5 Core, 300 Sq. mm XLPE Al. Ar. Cable etc as required. The copper loss and Iron loss shall be as per the 3 Star rating out Door Transformer. (Make:- Power Star/True Volt/ Synergy/Voltamp.

Total Cost of 250 KVA 11/0.433KV (OCTC) Outdoor Tansformer.

Supplying and fixing 4 ft X40 watt (2x20 watt) suspended type LED luminaire provides soft-light and glare free symmetrical illumination complete with all accessories etc. including ball and socket arrangement, 2 no. down rods of 20mm dia X 1.6 mm thick G.I. pipe upto 30 cm. length, painting and wiring the down rods and connection with 1.5 sq mm FR PVC insulated copper conductor, single core cable and earthing etc. as required. Make :- .Trilux/ Wipro/ Philips/ Havells

Supplying and fixing 20 A,415V TPN Industrial Type,Socket out let,with 4 Pole and Earth,metal enclosed plug top,along with 20 A 'C' curve,TP MCB,in sheet steel enclosure,on surface or in recess,with chained metal cover for the socket outlet and complete with connections,testing & commissionong etc. as required. (to be used in work Shop) Make:- Schneider, Legrand, Siemens.

1.1 KV Cable End Termination:-Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.

3.5 Core 25 Sq. mm. (28mm)

3.5 Core 95 Sq. mm. (45mm)

3.5 Core 300 Sq. mm. (70mm)

3.5 Core 400 Sq. mm. (82mm)

4 Core 16 Sq. mm. (28mm)

11 KV Cable End Termination:- Supplying and making out door cable end jointing with cast resin compound, lugs and other jointing materials, for following size of 3 core XLPE aluminium conductor cable of 11 KV grade as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc. as required

80 mm dia

100 mm dia

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. (23AWG Cable) Make- Legrand-,Schneider- Actasis, Optronix

1 run of Cable

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Triple Pole (to use for VTPN DB for Essential load as OUT Going)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Up to 35 sq. mm (Clamped with 1 mm thick saddle)

Above 35 sq. mm and upto 95 sq.mm. (Clamped with 25x3mm MS Flat Clamp)

1.1 KV Cable End Termination:-Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.

3.5 Core 35 Sq. mm. (32mm)

ROOF TOP SOLAR PHOTOVOLATIC POWER PLANT

Supply, Installation,Testing and Commissioning of on grid Roof Top Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/ Poly Crystalline silicon solar cells,net metering facility,necessary protections, earthing, mountedon Aluminium/ GIstructure of suitable strength with following components complete as required:-

a) Solar Photovoltaic Module of capacity 330Wp or above, manufactured in ndia, conforming to IS 14286/ IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than16.5%. PV modules used in solar power plants/ systems must be warranted for their out put peak wattcapacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.

b) Power Conditioning Unit (PCU) of350-800 V DC Input voltage rangeand 400 V AC, three phase, 4 wire, 50Hz+/-2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%,total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.

c) Data Monitoring System complete with accessories.

d) Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and outgoing cable along with glands, lugsand other accessories etc. as required.

e) Lightning and surge voltage protection.

f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/ conduit lugs and other accessories etc.as required.

Total Cost of Roof Top Solar Photovoltaic Power Plant

Providing, laying, connecting, testing & commissioning of multi-core telephone un- armoured cables of conductor size 0.5 sq.mm. annealed tinned electrolitic grade copper, PVC insulated, twisted pairs bunched together, over all PVC sheathed, GI strip or wire armouring laid on existing cable tray or along the wall or laid in pipes or in trenches including excavation of cable trench, sand filling covering with bricks and back filling complete as required. (Make : Finolex / Polycab / Havells)

10 pair PISTL10PXO. 51008

Supply, installation and Pramoda ABS Telephone instrumentsingle push button (Pramoda) (PRAMODA PT 88) Make:- (BEETEL/PANASONIC/ ORPAT).

IP PBX SYSTEM:-Supply, fitting, fixing, commissioning and testing of IP based 100% non-blocking IP PABX System should be a IP Compatible with rich feature set of the system and can be connected with pure Voice over IP (VoIP) communication network across corporate Local and Wide Area Networks (LAN and WAN) as & when required. Central Processing Unit: The system main software should be open architecture based. The CPU of main system shall be 32 bit processor working at 2.0 GHz or better. The system should be Wall mountable. • System Architecture should be latest pure IP and should be wall Mountable  Meet-me conference 30 party X 2 from day 1 must be available. Must Support Unified Communications Equipped with 64 Analog extensions 32 IP Extensions alongwith IP User License loaded from day expandable upto 256 IP Extensions, VOIP CARD in built charger, battery with one our back up facitity. 32 Analog Trunk Ports, 1 PRI , 02 Ports Auto Attendant- IPABX. Make: Avaya/NEC/Alacatel

Providing, fitting, fixing, connecting and testing of 12U LCS2 Network Wall Mount Rack: Width (mm)-600, Depth (mm) - 500, Approx.Net Wt (kg) - 27, CRCA 'D' Grade thickness (mm) - 1.2, Powder Colour for Cabinet - RAL9002, Glass - 4mm Toughened Tinted Glass Door, Accessories:, Cooling Fan (230V A/C 90 CFM) - 2 Nos, PDU 230VAC - 1 No, Cable Manager Metal - 3 Nos, Mounting Hardware (20 sets of M6 screws,washer,cage nuts (nickel coated)) - 1 No, Wall Screws (4 sets of 2'' screws, washer,rubber grommet (nickel coated)) - 1 No, Door Lock - 1 No, Front Metal Band -1 No. In the rack there must be maintained1 U = 1.75 inches space. (Make : Legrand / Ortronics / Schneider).

Cost of 12 U Network wall mount Rack

Providing, fixing, fitting, installation and testing of 36 U Server Cabinet (RACK) (Floor Mounted) 19" LCS2 along with all following standard accessories:- (Make : Legrand-634806 / Schneider / Rittal)

600mm (W), 600mm (D)

Approx. Wt.120 Kg,

CRCA 'D' grade 1.6mm thick sheet, pwoder coated for cabinet RAL- 9002,

4mm Toughened Tinted Glass Door

Along with following accessories:-

1. Cooling fan 220/230V AC, of 90 CFM-------4 Nos.

2. Cable manager Metal 4 Nos.

3. PDU- 230V /AC 1 No.

4. Cable Channel 100mm wide. 2 Nos.

5. Heavy Duty Stationary Shelf 600mm(W)X475mm(D) -1 No.

6. Mounting Hardware (20 Sets of M-6 screws, washers, cage, nuts (Nickle Coated)- 3 Nos.

7. Earthing strips copper 150mm H 1 No.

8. Door Lock 1 No.

9. Caster Wheels (with breake) 2 Nos.

10. Caster Wheels (without breake) 2 Nos.

11. Front Metal Band 1 No.

Cost of 36 U server cabinet

SITC of 2 MP Bullet Varifocal IP (IR) indoor Bullet camera (2.8-12mm Lens) (Matrix) , 3 years warranty, Day Night Type, -1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps,2.7 to 13.5 mm lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S, PROFILE G), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 128 GB (SD card not included), Alarm: 2 inputs & 2 outputs, Audio: 1 input & 1 output, IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Scene change detection,Motion detection, Face detection, Audio exception detection, Video tampering, UL, FCC, CE certified. Make- Axis/Hikvision/Pelco/Honeywell or as appoved by Architect/ Consultant.

SITC of Matrix 2 MP IP Mini Dome indoor Camera with 3.6 fixed lens, Audio Support, 3 years warranty, Resolution D1 (704 x 480 Pixel),HD (1280 x 720 Pixel),Full HD (1920 x 1080 Pixel) Day Night type, ( Progressive Scan CMOS, 1920 × 1080 at 25fps,2.7 to 13.5 mm Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S, PROFILE G), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 128 GB (SD card not included), Alarm: 2 inputs & 2 outputs, Audio: 1 input & 1 output, IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Scene change detection,Motion detection, Face detection, Audio exception detection, Video tampering, UL, FCC, CE certified.Make- Axis/Hikvision/Pelco/Honeywell or as appoved by Architect /Consultant.

SITC of 2MP IR Bullet Fixed Camera -1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S, PROFILE G), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 128 GB (SD card not included), IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering, UL, CE, FCC certified. Make- Axis/Hikvision/Pelco or as appoved by Architect/Consultant.

SITC of 64ch Network Video Recorder (NVR) (SIP-9S-4HDG-64)- Connect Up to 64 IP support Cameras, 2 U Rack mounting confrigation dual-OS design, Up to 12 Megapixels Resolution, 2 HDMI output with one atleast at 4K (4096×2160) , 1 VGA output with 2MP resolution,Support H.265/MJPEG, Incoming Bandwidth 500 Mbps, 8 SATA Hard Disks, ANR Technology, 16 SATA interfaces for 8 HDDs and capacity of each HDD upto 8 TB, front panel: 1 × USB 2.0 rear panel: 2 × USB 3.0, Alarm I/O 16/4, RS-485, 4 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified with Survelliance SD Crad ,with 32 TB storage (inclusive of 32TB Surveillance Hard Disk:- 8 nos.) Make- Axis/Hikvision/Pelco or as appoved by Architect/Consultant.

SITC of 43" LCD 24X7 Surveillance Monitor ((SMART TV). Make-LG/Samsung or as appoved by Architect/Consultant. Make:- Sony, LG, Panasonic

9 U WALL MOUNT EQUIPMENT RACK

SITC of of 9U Wall Mounted Networking Cabinet 504.65X600X500 (HXWXD): Rack must be along with the following components like; Width (mm)-600, Depth (mm) - 500, Approx.Net Wt (kg) - 20, CRCA 'D' Grade thickness (mm) - 1.2, RAL 9017 (Matt Black), Glass - 4mm Toughened Tinted Glass Door, Accessories:, Cooling Fan (230V A/C 90 CFM) - 2 Nos, PDU 230VAC - 1 No, Cable Manager Metal- 2 Nos, Mounting Hardware (20 sets of M6 screws,washer,cage nuts (nickel coated)) - 1 No, Wall Screws (4 sets of 2'' screws, washer,rubber grommet (nickel coated)) - 1 No, Door Lock - 1 No, Front Metal Band -1 No. In the rack there must be maintained 1 U = 1.75 inches space. (Make : Make : Legrand-VALRACK/ Netrack/Rittal/Schneider/Ortronics or as approved by architect). (1 no. for CCTV, 4 no. Smart clases, and 1 no. Audio System in Multipurpose Hall)

Cost of Wall Mount 9 U Network Rack

PANEL FOR LIFT MACHINE OF MAIN BUILDING:-

Supplying, designing, manufacturing, installation, testing and commissioning of wall mount Panel fabricated out of 2mm thick(14SWG) CRCA sheet steel, dust and vermin proof with reinforcement of suitable size iron channel, size 25mmx25mmx3mm with proper lifting arrangement effecting proper connection of all incomer and out going (IP-43) fully compartmentalized cubical type (folded joints construction), wall mounted, totally enclosed, switch board and suitable for use on 415V, 3 phase, AC Supply, 4 wire, 50 C/S, system having 25 KA fault capacity, housed with incoming and outgoing aluminum bus bars, interconnection, interlocking between feeders etc. with indicating lamps, push buttons, necessary accessories, all out going feeders protection & meters as required. The sheet steel under go minimum 7 tanks treatment followed by finishing of powder coating of minimum 60 micron thickness, duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 Nos. earth studs.

All openings shall be covered by soft rubber gasket, enclosure shall be galvanized. Panel shall have suitable cable entry from bottom and suitable arrangement for multi runs aluminum cables for all MCCB.The lift Machine Panel shall have individual compartment with name plate.

Panel Size - As per Drawing and shall be provided at the time of work order.

SLD will be submitted by the contractor for approval by Engineering Incharge/Consultant before submitting the Lift Machine Panel drawing. Based on approved SLD, contractor will provide the GA drawing of LT Panel. Inspection of the Lift Machine Panel shall be carried out at Panel Builder's factory by the Consultant before final delivery.

The Name Plate for each incoming & outgoing feeder must be in Anodized Aluminium Sheet.

BUS BARS SECTIONS

The panel includes 415V, 100A, 3Ph, 25KA, 50Hz Electrolytic Aluminium Bus Bar (E91EWP) Aluminium Earth Bus with removable glands plates, cable glands at sending and receiving ends, including connection with outgoing feeders complete in all respects. The electrolytic Aluminium bus bar of grade 63401 WP as per I:S 5082 of suitable length and insulated by heat shrinkable sleeves Red, yellow, Blue and Black as R Y B & N. The current density of bus bar shall be minimum 0.8 A /sq.mm. In Machine room Lift Panel interconnection of the MCCB with the main Bus -bar shall be with suitable Al. Bars up to 63A capacity. Other inter connections shall be made with 2.5 and 4 Sq mm PVC Cu. wire.

1 set of Fabrication part of Lift Machine Panel & busbar system, in CRCA Sheet Steel enclosure (IP-43) without any componentsP & its busbar system, in CRCA Sheet Steel enclosure (IP-43) without any components. Name of Panel Builder :- SPC Electrotech Pvt. Ltd. /EAP-KOL/ AC POWER- Kolkata/Tirupati Technical Services Pvt. Ltd, Ranchi / JMD Technocrat- Kokar, / Macro Cosmic, Patna, or any approved channel partner or License parter of above Switch Gears Companies.(SUB_TOTAL-A)

Make of MCCB - L&T D-Sine/ Legrand DPX³ / Schneider-NSX / Siemens - 3VL.

Make of MCB10 kA, C Series. - L&T-EXORA/ Legrand-Dx³/ Schneider-Acti / Siemens.

The above panel consisting of the following:-

Location : Mufty (Lift Machine Room)

Note:- All FP/MCCB shall be with thermomagnetic based release type and shall be with spreader links and front rotary handles.

INCOMER

1 No. 63A FP/25KA, MCCB with thermomagnetic release with front rotary handle and spreader links, including suitable arrangement for cable connection on one side and Bus bar connection on other side

INDICATING FOR PANEL FOR LIFT MACHINE

3 Nos. CT 100/5VA -5 class one Epoxy resin cast CT (3 Nos.)=1 Set. Make:-Kappa / Matrix

3 Sets Phase indicating light shall be protected by 2 Amps SP MCB's for incomer.Make-L& T./ AE/ Schneider.

OUT GOINGS:-

2 Nos. 40A FP/10KA, MCB C-Series (1 no. as spare)

2 Nos. .25A DP/10kA MCB-'C-series'.

Total Cost of Lift Machine Panel (Wall mount).

DATA NET WORKING SYSTEM Passive Component :- (DATA)

Providing, fixing, fitting, connecting and testing of white RJ 45 Cat 6 Data outlet / Toolless information outlets with white coloured RJ-45 transparent shuttered modular scoket outlets with front plate. ETL verified to meet or exceed TIA / EIA category 6 requirements, universal wiring label permitting to either T568A or T568B, UL listed, for computer networking complete in all respect suitable to fix in modular plate type switch system with connections as required. (Make:- Legrand- Arteor-573428/Scheinder- Zencelo/ Mk- Blenz)

Supplying, fitting, fixing, connecting and testing CAT6 UTP RJ45 Loaded patch panel & connector - 24 port loaded 19" panel - 1 U, Panel: DC01 galvanised sheet steel, Compliant with standards: ISO/IEC 11801 Edition 3.0 CENELEC EN 50173-1 2007 ANSI/EIA/TIA 568 C2-1 IEC series 60603-7, NFC 20730, Standard 8877 – 603.7, Contacts: gold/nickel, thickness of gold > 0.8 μm minimum, Equipped with rear cable guide to hold cable during maintenance,The connectors are connected from the front without a special tool. Equipped with 4 cassettes of 6 RJ45 Cat. 6 connectors with toolless fast connection, marked 568 A/B, Max. number of connections and disconnections: 5 without replacing the wire, Endurance: 2500 operations (plug-in/pull-out) IK03, Operating temperature: -40°C to +70°C (Make:- Legrand- Arteor-033760/ Amps./ Schneider.

Supply fitting, fixing, and testing of BLUE/YELLOW color CAT6 LCS2 U/UTP 1 MTR (3.5 ft) factory made LCS2 Patch cord with boot Factory Crimped PVC,Performance at 250MHz Should be as per Standards - IEC 61935-2 - Ed. 3.0 ISO/IEC 11801, Usage Temp – 20 to + 60°C, No of Twists 500, No of insertions 750, 24 AWG for rack end. (Make:- Legrand- Arteor-051772/ Amp , Cat#1859247-4 / Schneider)

Supply fitting, fixing, and testing of BLUE/YELLOW CAT 6 LCS2 U/UTP 3 MTR (10 ft) factory made LCS2 Patch cord with boot Factory Crimped PVC,Performance at 250MHz Should be as per Standards - IEC 61935-2 - Ed. 3.0 ISO/IEC 11801, Usage Temp – 20 to + 60°C, No of Twists 500, No of insertions 750, 24 AWG at end user side. (Make:- Legrand- Arteor-051774 /Amp , Cat#1859247-7/ Schneider)

Providing, fixing, connecting & testing of Blanking plate (6XRJ45 Blanking plate for 19" panel - Black). .(Make : Legrand-032129 AMP/ Schneider)

Providing, drawing, connecting and testing of 6 Core unarmoured unitube Multi Mode OM3 OFC (Fiber Optics cable) from wall mounted rack to server room Rack,i,e Rack to Rack Connectivity) in existing heavy duty 25 mm PVC Pipe.Make- Make : Legrand Cat NO 332021/ Schneider/ Tyco.

Providing, fixing, connecting and testing of Modular of 6 port unloaded LIU SC type. (Make : Legrand.032100 /Schneider/Amp)

Providing, fixing, connecting and testing of of 3 Duplex SM 9/125 SC adapter plate. (Make : Legrand-032110 /Schneider/ AMP

Providing, fixing, fitting, connecting and testing of SC- Pigtial 1 Mtr 10 GB -9/125, MM Make- Legrand.032241 /Schneider /AMP

Providing, fixing, fitting, connecting and testing of SC/LC duplex cords OS1/OS2 of 2 Mtrs. Length PC. . Make- Legrand-032604 /Schneider/AMP)

Providing, fixing, fitting, connecting and testing of OS1/OS2 SC/LC duplex patch cords 3 mtr, PC (Make : Legrand.032605/ Schneider/ AMP)

Providing, fixing, fitting, connecting and testing of Splice Tray - 24 Fiber Capacity. :(Make : Legrand - 032130/ Schneider/ AMP)

ACTIVE COMPONENTS:- Active Components:- (DATA)

L2 PoE Access Switch

Supply, fitting, fixing, connecting and testing of switch with 24 x 10/100/1000T PoE ports and 4 x 100/1000X SFP ports, Switching Capacity 56Gbps and Forwarding Rate 41.7Mpps, Switch should support PoE and PoE+ with 370W minimum power budget, operaating temperature 0°C to 50°C, Switch should support link reccovery within 50ms for Ring architecture, SDN or similar kind of technolgy should support, Warranty 5 year from Day 1 . Make:- Cisco - WS-C2960X-24PS-L / Allied Telesis - AT-x230-28GP / Juniper - EX2200-24P)

The above L2 Managed Data Switch consists of the following:-

1. Power cord India, right angle.

2. Both side Cable connector.

3. 1 year free service pack.

Interface- 24 x 10/100/1000T ports and 4 x 100/1000X SFP ports

Switching Capacity/Forwarding Rate :- 56Gbps/41.7Mpps

Performance:- Up to 16K MAC addresses, 256MB DDR SDRAM

Management:- Console port, GUI, Telnet, SSH,SNMPv1,2 and 3, powerful centralized management and zero-touch device installation and recovery like SDN,

Security:- Console port, GUI, Telnet, SSH,SNMPv1,2 and 3, powerful centralized management and zero-touch device installation and recovery like SDN,

Routing:- IPv4 static routing and RIP.

Fail-over:- Switch capable of recovery within 50ms in a ring for application high availability

IPv6:- Device management over IPv6 networks with SNMPv6, Telnetv6, SSHv6 and Syslogv6

Diagnostic:- Optical Digital Diagnostics Monitoring,Automatic link flap detection and port shutdown,Port and VLAN mirroring (RSPAN)

Standard Protocol:- IEEE 802.1Q,IEEE 802.1w,IEEE 802.1s,IEEE 802.1p,IEEE 802.1AB,IEEE 802.1AX,IEEE 802.3ad

Operating Temparature:- 0°C to 50°C

Certification:- EN,UL and RoHS

Warranty:- 5 Years.

Cost of L2 PoE Access Switch

Fiber Module

Providing, fixing, connecting & testing of Gigabit Fiber Module-MM, Support up to 550mtr (Make:- Cisco - GLC-SX-MMD / Allied Telesis -Model No. GLC-SX-MMD/AT-SPSX/CTP-SFP-1GE-SX) / Juniper - CTP-SFP-1GE-SX)

Access Point

Supply, fitting, fixing, connecting and testing of Wireless Access Point with IEEE 802.11ac dual-band radio and embedded antenna with 3x3 MIMO, Centrally controlled and managed by WLAN, Multiple SSID with VLAN mapping, Dynamic RF coverage optimization, Warranty 5 year from Day 1 (Make:- Cisco - AIR-AP1832I-x-K9 / Allied Telesis - AT-TQ4600 / Juniper - WLA632)

Cost of Acess Point

Router / UTM

Supply, fitting, fixing and testing of UTM/Router with LAN: 2 x 1000X SFP / 2 x 10/100/1000T RJ-45 combo, WAN: 2 x 1000X SFP / 2 x 10/100/1000T RJ-45 combo , HA: 2 x 10/100/1000T RJ-45, Should support URL Filtering, DoS and DDoS attack detection and protection, Antivirus, Malware protection, Static, Dynamic (BGP4, OSPF, RIPv1/v2), source-based routing, policy-based routing and IGMPv1/v2/v3. Warranty 5 year from Day 1 ( Cisco - ASA 5516-X with Fire Power Services / Allied Telesis - Model No. ASA 5516-X with Fire Power Services/AT-AR3050S/SRX300 / Juniper - SRX300)

The above router consists of the following:-

Cisco 2901 AC Power Supply (PWR-2901-AC)

AC Power Cord (India, South Africa), C13, BS 546, 1.8m

Blank faceplate for HWIC slot on Cisco ISR

Cisco Config Pro Express on Router Flash

512MB DRAM for Cisco 2901-2921 ISR (Default)

256MB Compact Flash for Cisco 1900, 2900, 3900 ISR

IP Base License for Cisco 2901-2951

Cisco 2901-2921 IOS UNIVERSAL

2-Port Serial WAN Interface Card

Security License for Cisco 2901-2951

1 year free service pack

INTERFACE:- LAN: 2 x 1000X SFP / 2 x 10/100/1000T RJ-45 combo WAN: 2 x 1000X SFP / 2 x 10/100/1000T RJ-45 combo HA: 2 x 10/100/1000T RJ-45

Processor and memory:- 800MHz dual-core, 1GB (RAM), 4GB (Flash)

Firewall / UTM (Unified Threat Manager) :- Deep Packet Inspection, Bandwidth limiting control for applications, Bridging between LAN and WAN interfaces, Data leakage prevention, URL Filtering, DoS and DDoS attack detection and protection, Antivirus, Malware protection, (Intrusion Detection System), IPS (Inclusion Prevention System) antivirous, anti spywire with 3 yrs subscription. This equipment will also protect & prevent outsider or visitors who are not assined in the existing Network i,e Office Network System can not availed by any otsiders or they can not curropt the Network System. ( For Active & Passive mode)

Routing and Multicasting:- Static, Dynamic (BGP4, OSPF, RIPv1/v2), source-based routing, policy-based routing and IGMPv1/v2/v3

NAT:- Static, IPsec traversal, Dynamic NAPT.

High availability:- VRRP, VRRPv3

Management & authentication:- Web-based GUI,Industry-standard CLI, SNMPv2 & v3, RADIUS, TACACS+, internal user database, web authentication

Warranty:- 5 Years on Hardware.

Cost of Router / UTM

4.0K lm, WXGA, HDMI, VGA LCD Projector

Supply fitting fixing, testing and commissioning of 4.0K lm, WXGA, HDMI, VGA LCD Projector with following specification :- Display method shall be Transparent LCD panel (x 3, R/G/B) Brightness: 4000 Lumens- Normal mode Lens: Manual zoom (1.6x) (throw ratio: 1.18–1.90:1), manual focus, F 1.60–1.90, f 15.31–26.24 mm Center-to-corner uniformity: 85% Contrast ratio: 12,000:1 (Full On/Off) (input signals: PC, lamp power: Normal, picture mode: Dynamic, Iris: On, Daylight View: Off, Auto Power Save: Off ) Resolution: 1,280 x 800 pixels Optical axis shift: 49:1(fixed) Keystone correction range: Vertical= ±40°(±30° when using auto), Horizontal= ±30° Terminals: HDMI IN, COMPUTER 1 IN, COMPUTER 2 IN/ MONITOR OUT, VIDEO IN Svideo in, AUDIO 1 IN, AUDIO 2 IN, AUDIO OUT, SERIAL IN, LAN, Built-in speaker: 10 W (monaural) x 1 Noise level: 37 dB (lamp power: Normal), 29 dB (lamp power: Eco), Cabinet materials: Molded plastic (PC) Operating temperature: 0 °C-40 °C (32 °F-104 °F) Operating humidity: 20-80 % (no condensation) Makes : Panasonic -PT-VW350D, SONY-VPLEX5/ Toshiba.

Standard 3 feet Projector ceiling mount:-

Supply, fitting fixing of standard 3 feet projector ceiling mounting . Make:- Online - LG-SDCM-3F

Motorized Screen 16:10 with S/R 109" :-

Supply fitting, fixing and testing of motorized projection screen with following specification:- 220V motorized Projection screen Matte white surface with unity gain White Matt motorized Projection screen with RF Remote control, Aspect ratio - 4 : 3 Image format: 16:10Image Diagonal Size not less than 109 inches Shall be supplied along remote- switch Makes : Draper/ Dalite/ Broun/Stewart.

Annoation tablet:-

Supply, fitting, commissioning and testing of Annoation tablet with following specification:- Screen size : 15.6" (344.232 x 193.536 mm) active matrix TFT LCD Resolution : 1366 x 768 (WXGA) Aspect ratio : 16:9 Response time: 8 ms or better Luminance: 255 cd/m2 or better Contrast ratio : 400:1 (typical) Viewing angle : 90°/ 65°(typical) Video input : Analog (RGB) / digital (DVI-I) Video output : Analog (RGB) / digital (DVI-I) Technology : Electromagnetic resonance technology (EMR) Interface : USB (2-port USB hub built-in) Input voltage : 100 to 240 VAC, 50/60 Hz Power consumption : 29W (Max), 2W or less in sleep mode, 1W or less in off mode Makes : Wacom , Hitachi , Elo

Wireless presentation gateway:-

Supply, fitting, fixing and testing of wireless presentaion gateway as per following specification:- HDMI output with embedded audio VGA output with 3.5mm audio port Onboard ethernet LAN port Built-in wireless access point dual front USB ports for control Resolution: 1080p 64 user queue quadrant display Cross-platform application Multitouch touchscreen control: upto6 Makes : wePresent, Extron, Crestron

HD Scaling Auto-Switcher & Extender:-

Cable Cubby :-

Supply fitting, fixing and commissioning of Cable Cubby with following specification:-Should have Easy access to cables Should have Pass through Connectivity for HDMI Should have Compact Size with square bezel Should have Unswitched AC power outlet Black or Brushed Aluminium finish or better Should be CE Compliant Makes : Magnum , AMX , Crestron.

6 ft HDMI Patch Cable :-

Supply fitting fixing and testing of 6ft HDMI Patch Cabel with following specification:- 6 feet high−speed HDMI cable 24k gold-plated 19-pin Type A connectors RoHS compliant Supports 4K Ultra HD video Supports Full HD 1080p with Deep Color and 3D Makes : Extron , Crestron , Kramer -C-MHM/MHM-6

6 ft VGA + Audio Patch Cable :-

Supply, fitting, fixing lay, terminating and testing of 6 ft VGA + Audio Patch Cable with following specification:-High-bandwidth computer VGA cable w/audio - 6ft Integrated mini-TRS stereo audio cable Supports computer resolutions up to WUXGA High-density 15-pin connectors RoHS compliant Makes : Extron , Crestron-, Kramer-C-MGMA/MGMA-6

1: 2 HDMI DA :-

Supply, fitting, fixing and testing of 1:2 HDMI Da with following specification:- Should split one HDMI source to two outputs Should Handle video resolution upto 4K and ultrs HD Should handle 3D video and deep color Should be HDCP compliant Should include input and output sync indicators No programming or control system required Should have thin profile: less than one inch deep Makes : Crestron/ AMX / Lightware

Twisted Pair Extender :-

Supply, fitting, fixing and resting of twisted pait extender with following specification: Shall be HDBaseT® Certified 4K Ultra HD signal extender Shall Extend uncompressed digital video, audio, and control signals over a single CAT type twisted pair cable Supports Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio Supports cable lengths up to 330 ft (100 m) for 1080p, WUXGA, and 2K using CAT5e. Supports 4K and UHD for cable length using 165 ft (50 m) using CAT5e Compatible with HDMI®, DVI, and DisplayPort Multimode sources. Compatible with HDMI and DVI display devices HDCP 2.2 compliant ; should pass CEC and EDID Makes : Crestron/ AMX / Lightware

Wireless Lapel Microphone :-

Supply, fitting, fixing testing and commissioning of wireless Lapel Microphone as per following specification:- Working Range : 91 m (300 ft) Line of Sight or better Audio Frequency Response 50 to 15,000 Hz Total Harmonic Distortion : 0.5%, typical Dynamic Range : 100 dB, A-weighted, typical Bodypack Transmitter : Gain Adjustment Range 26 dB RF Transmitter Output 10 mW, Housing Molded ABS Power Requirements 2 LR6 AA batteries, 1.5 V, alkaline Battery Life up to 14 hours (alkaline) Wireless Reciever : Output Impedance XLR connector : 200 Ω Audio Output Level : XLR connector: –27 dBV (into 100 kΩ load) RF Sensitivity : -105 dBm Image Rejection: > 50 dB, typical Housing : Molded ABS Cardioid Capsule : Type : Condenser, electret bias Frequency Response : 50Hz to 20,000Hz Polar Pattern: Cardioid (unidirectional) Signal to Noise Ratio : 70dB Maximum SPL : 120dB Dynamic Range : 92dB Makes : Shure , Beyerdynamic , Sennheiser

Gooseneck Microphone :-

Supply fitting fixing and testing of Gooseneck Microphone with following specification:-18" Cardioid Gooseneck Microphone Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum Should Have Mute Switch / LED Indicator Balanced, transformerless output for increased immunity to noise over long cable runs Transducer type : Condenser Frequency Response : 50 Hz to 17 kHz Dynamic Range (Typical) : 96.2 dB, (@ 1 kW Load) Signal-to-Noise Ratio : 66.0 dB, (Referenced @ 94 dB SPL) Maximum Input Sound Level : 124.2 dB, (1 kHz @ 1% THD, 1 kW Load) Power Requirements Phantom : (11 to 52v, DC) Output Impedance : 150 Ohms (180 Ohms Actual @ 1 kHz) Output Connectors :XLR-3M Type Makes : Shure , Beyerdynamic , Sennheiser

4-Channel Digital Audio Matrix Mixer :-

Supply, fitting, fixing testing and commissioning of 4-Channel Digital Audio Matrix Mixer as per following specification:- Audio Input : 4 balanced/unbalanced line-level audio inputs; Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced; Audio Output : 4 balanced/unbalanced line-level audio outputs; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced Frequency Response ±0.1dB 20Hz to 22kHz, ±0.5dB 10Hz to 30kHz S/N Ratio >97dB balanced, >95dB unbalanced, 20Hz to 22kHz A-weighted Common Mode Rejection >90dB 20Hz to 22kHz PEQ Filter Types low pass, high pass, EQ filter (peaking/notching), bass shelf, and treble shelf Makes - Crestron,Biamp,BSS

Commercial Power Amplifier :-

Wall Mount Speakers :-

Supply, fitting, fixing testing and commissioning of Wall mount Speakers as per following specification:- Wall mount speakers 2-way surface mount speaker Designed for high reliability in both indoor and outdoor applications Built-in 30 Watt 70/100V multi-tap transformer Allows 360° rotation and continuously variable positioning 100 Watts program power handling at 8 Ohms 80 Hz - 18 kHz frequency range Paintable to blend with surroundings Black in colour Makes - Crestron,Tannoy,Bose

Various Bulk Cables and Connectors with Accessories :-

Supply, laying, terminating , and testing of Bulk cable connectors with all acessories as per following specification:-Various Bulk Cables and Connectors with Accessories Approved Makes for microphone cable: Belden, Extron, Crestron, Kramer Approved makes for Speaker, Stereo Audio / Control, VGA cable: Extron, Crestron, Kramer. (lot for 1 smart Class Room)

Wireless Lapel Microphone Set :-

Supply of Wireless Lapel Microphone Set with following specification:-

Reciever :

Tuning Range : Up to 30.5 Mhz or Better.

Diversity System : Antenna switching

RF Output : 20 mW or Better

Audio Bandwidth : 35 – 20 000 Hz (± 3 dB) or better

20 compatible channels within one frequency band or better

Modulation : Wideband FM

Bodypack Transmitter :

Audio Frequency bandwidth : 35 to 20,000 Hz or better

Signal to Noise : 120 dB-A dB-A or better

THD at 1 kHz : 0.7% or better

Audio Input : TB3M / 3-pin mini-XLR socket (max. 2.5 Vrms)

Lavellier Microphone :

Audio Frequency bandwidth : 35 to 20000 Hz or better

Signal to Noise : 120 dB-A or better Approved .

Make : AKG -WMS470 preaenter Set, Beyerdynamic , Sennheiser.

Cost of Wireless lapel Microphone Set with above specification

Wireless Lapel Microphone Set :-

Supply, fitting, fixing and testing of Wireless Lapel Microphone Set with following specification:-

Reciever :

Tuning Range : Up to 30.5 Mhz or Better.

Diversity System : Antenna switching

RF Output : 20 mW or Better

Audio Bandwidth : 35 – 20 000 Hz (± 3 dB) or better

20 compatible channels within one frequency band or better

Modulation : Wideband FM

Bodypack Transmitter :

Audio Frequency bandwidth : 35 to 20,000 Hz or better

Signal to Noise : 120 dB-A dB-A or better

THD at 1 kHz : 0.7% or better

Audio Input : TB3M / 3-pin mini-XLR socket (max. 2.5 Vrms)

Lavellier Microphone :

Audio Frequency bandwidth : 35 to 20000 Hz or better

Signal to Noise : 120 dB-A or better Approved .

Make : AKG -WMS470 preaenter Set, Beyerdynamic , Sennheiser.

Wireless lapel Microphone Set with above specification

Wireless Handheld Microphone Set -

Supply, fitting, fixing and testing of Wireless Handheld Microphone Set with following specification:-

Reciever :

Tuning Range : Up to 30.5 Mhz or Better

Diversity System : Antenna switching or better

RF Output : 20 mW or Better

Audio Bandwidth : 35 – 20 000 Hz (+/- 3dB) or better

20 compatible channels within one frequency band or better

Modulation : FM or better

Working Range : 30m or better

Transmitter :

Audio Frequency bandwidth : 35 to 20,000 Hz or better

Signal to Noise : 120 dB-A dB-A or better

THD at 1 kHz : 0.7% or better

Cardiod polar pattern or better

Should have noiseless ON/Off Mute Switch

Should have Gain Control on transmitter for immediate volume control

Make : AKG - WMS470 Vocal set, Beyerdynamic , Sennheiser.

Wireless Handheld Microphone Set with above specification

4x4 Signal Mixer Processor:-

Supply fitting , fixing and testing of 4x4 Signal Mixer Processor with following specificatio+ for amplifire.

Analog Inputs: 4 electronically balanced on Phoenix Mini Combicon removable screw connectors

Mic/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps

Input Impedance: 3.5kΩ

Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain

CMRR: >45dB at 1KHz

Input Noise (E.I.N.): <-128dBu typical with 150Ω source

A/D Latency: 37/Fs [0.77ms@48k]

Analog Outputs: 4 electronically balanced on Phoenix Mini Combicon removable screw connectors

Maximum Output Level: +20dBu

Frequency Response: 20Hz-20KHz (+0.5dB/-1dB)

THD: 0.005% typical at +4 dBu, 1kHz, 0 dB input gain

Dynamic Range: 110dB A-weighted, >107dB unweighted

Crosstalk: <-100dB

Output Impedance: 120Ω

D/A Latency: 29/Fs [0.60ms@48k]

12 Control Inputs and 6 Logic Outputs for GPIO Integration

Makes : BSS - BLU-50, BIAMP, Clearone.

Cost of 4X4 signal Mixer processor with above specification.

Amplifier -

Supply fitting , fixing and testing of Wireless Mixer Amplifire Set with following specification:- Audio Power Amplifier Dual Channel Audio Power Amplifier or better Class D or better Output Power : 8 Ohms : 375Watts or better per channel 4 Ohms : 650 Watts or better per channel 2 Ohms : 1050 Watts or better per channel Sensitivity : 1.4Vrms or better Frequency Response (at 1W, 20Hz to 20kHz) : +0dB, -1dB or better Signal to Noise Ratio : >97dB or better THD : <0.5% or better Damping Factor ( 8 Ohms ) : >200 or better Crosstalk : At 1kHz: > 85dB or better At 20kHz: > 55dB or better Should have Efficient forced-air fan ventillation system to prevent excessive thermal buildup Makes : Crown - XLS2002, Bose , QSC

Supply fitting , fixing and testing of Wireless Mixer Amplifire Set with following specification:- Audio Power Amplifier Dual Channel Audio Power Amplifier or better Class D or better Output Power : 8 Ohms : 375Watts or better per channel 4 Ohms : 650 Watts or better per channel 2 Ohms : 1050 Watts or better per channel Sensitivity : 1.4Vrms or better Frequency Response (at 1W, 20Hz to 20kHz) : +0dB, -1dB or better Signal to Noise Ratio : >97dB or better THD : <0.5% or better Damping Factor ( 8 Ohms ) : >200 or better Crosstalk : At 1kHz: > 85dB or better At 20kHz: > 55dB or better Should have Efficient forced-air fan ventillation system to prevent excessive thermal buildup Makes : Crown - XLS2002, Bose , QSC

Cost of Audio Power Amplifier with above specification.

Line array Column speakers:-

Supply, fitting, fixing and testing of Line array Column Speakers with following specifications:-Column Speakers Frequency Range (-10 dB) : 80 Hz – 20 kHz or better Coverage Pattern : Vertical 20° or better Horizontal 150° or better Sensitivity : 93 dB (speech mode, 2 kHz - 14 kHz) or better 89 dB (music mode, 300 Hz - 18 kHz) or better Nominal Impedance : 8 Ohms or better Power Capacity : 150W (600W peak), 2 hrs or better 100 W (400W peak), 100 hrs or better Max SPL : Speech mode: 115 dB cont ave (121 peak) or better Music mode: 111 dB cont ave (117 peak) or better 70V/100V Transformer Taps : 60W, 30W, 15W or better Enclosure : Fiberglass reinforced ABS cabinet, painted aluminum grille or better Outdoor Capability : IP-54 rated, per IEC529. UV, moisture and salt-spray resistant or better . Makes : JBL- CBT-50LA, Bose ,Tannoy

Line array Column Speaker with above specification.

Various Bulk Cables and Connectors with Accessories

Supply laying & testing of Various Bulk microphone and speaker Cables in existing 2 mm PVC Rigid pipe and Connectors with Accessories Approved Makes for microphone cable: Belden, Extron, Crestron, Kramer Approved makes for Speaker, Stereo Audio / Control, VGA cable: Extron, Crestron, Kramer, (Kramer BC 2T, BC 2S, BC 5X, Dlink NCB-C6SGRYR-305

various cables for microphone and speakers.

Supplying the following Lighting fixtures including lamps at site. (Note:- All lighting fixtures shall be of LED. Samples of all light fixtures are to be submitted to the Engineer-in- charge or consultant for the approval prior to procurement of light fixtures.

Supply of 8W/10W LED Bulb in existing holders. (Make:- Havells- LED ADORE-10W-B22WCDL / Equivalent in Philips / Bajaj / Wipro).

Supply of surface mounted round/Square circular decorative Surface mounted 15W LED downlighter in powder coated white finish with integrated electronic driver. Make Philips- DN170C-LED-10S-6500-PSUWH / Havells- INEGRA-SURFACE-LHEAAGP7PLIW015 / Bajaj- BGCML-12-01-WH / Wipro- LD81-131-XXX-60-SM.

Building Outer Light (45/48W LED) :- Supply of building outer lighting luminaire aerodynamically shaped single piece pressure die-cast Aluminum luminaire with high power LEDs as light source and electronic driver (IP65), along with 45/48W LED Lamp, as Energy saving as per drawing prescribed reflector and heat resistant toughened flat glass cover, with 5ft long 40mm dia G.I. pipe with 3 Nos. of iron clamps , anchor nut bolts with double washers as per direction of E/I or consultant as per drawing prescribed reflector and heat resistant toughened flat glass cover (IP-65) (Make:- Bajaj- BRTFG45-LED / Philips- BRP409LEDCW036MRFGSIPSUGR / Havells- LHETAXU7PN6J045 / Wipro- LR02-501-XXX-57-XX.

FANS & Exhaust FANS

Supply of 1200 mm sweep ceiling fans complete with double ball bearing, motor, blades, downrod, canopies, capacitor, suitable for operation on 230 volts, 50 Hz., 1 phase, AC supply connection with 1.5 sq.mm PVC Copper wire complete as required (minimum BEE three star rated with minimum air delivery of 218 CFM/M and ISI brand.) 2 years warranty. Colour of Ceiling Fan- White/Ivory. (Make- Havells/USHA/BAJAJ/ Crompton

Supply of 12" (300mm) dia 1400 rpm,230V AC Exhaust Fan (metal) exhaust fan in with double ball bearing existing opening and fittinigs as required. Make- Havells Ventil Air-DB 300 mm / Bajaj Supreme Dlx 300mm 1400 rpm 1Ph Ind Ex Fan/ Crompton Trans Air 12".

CHEMICAL EARTHING WITH HDPE EARTH PIT COVER FOR ALL ELECTRICAL EQUIPMENTS:-

Supply, errection, fitting, fixing, commissioning and testing along with earth cutting, digging, earth refilling for chemical earthing of the building except G.I. Strips (25mmX5mm) Each earth pit has to be tested with earth tester 1000 V/1000 Ohms & the test report has to be submitted by the contractor to the department after certification of the same by the consultant. The above chemical earthing includes the provision of masonary enclosure and HDPE Earth Pit Cover 300mm X 300 mm (Under-floor earth inspection pit) having locking arrangement as earth chamber.The above chemical earthing includes the following items (3 Mtr Earthing)

Supply of Pollution free Earthcon Compound 25Kg (or 2 bags of 12.5 Kg each)

Supply of 17.2 mm dia,250 micron,molecularly bounded copper coated 3 Mtr long electrode. Tested as per IEC 62561-2. Meets the requirement of IS 3043 & IEC 60364-5-54. Tested for short circuit withstanding capacity. High Tensile strength. (UL Listed).

Supply of "U" Bolt Clamp

Supply of HDPE Earth Pit Cover for earth chamber (Capacity of 5 ton)

Make:- OBO / Prolite / Ingesco/DEHN/ABB

Main LT Panel - 2 Nos.

APFCR Panel- 2 Nos.

Transformer (2 nos. as neutral & 2 Nos. Body Earthing)- 4 Nos.

D.G. Set (2 nos. as neutral & 2 Nos. Body Earthing)- 4 Nos.

For Pump Motors - 2 Nos.

Total no. of Earth pits- 14 .

Each CHEMICAL EARTHING shall have following details:-

Total Cost of chemical Earthing Kit

Main LT Panel For Campus :-

Supplying, designing, manufacturing, installation, testing and commissioning in correct alignment position, effecting proper connection of all incomer and outgoing of LT Panel of 14 SWG CRCA sheet (2 mm) steel IP –43 floor mounting cubical type Floor mounted LT Panel suitable for operation on 415V, 50Hz, 3 Ph. AC supply and fault level 36 KA with front operated construction including separate fabrication arrangement for fixing M.C.C.B.

The sheet steel under go minimum 7 tanks treatment followed by finishing powder coating of minimum 60 micron thickness duly compartmentalized with locking arrangement duly fixed on Base Channel Size – 75 mm x 75 mm x 6 mm having accessories mounted inside the cubical panel, earthing with 2 Nos. earth studs. Detail drawings and SLD shall be provided at the time of work order.

The Panel shall be interlocked with switchgear in such a way that no door can be opened when the switch is in ON position.The switch gear shall have mechanical arrangement for interlock defeat.The design of panel shall be such as to offer maximun safety and ease of maintenance.

The MCCB's shall be Ics = 100% Icu, with rotary handle, spreader links & pad locking arrangement, with trip setting as per load requirement with short circuit & over current protection. The breaking capacity specified is Ics=Icu value. All MCCB's shall be of thermo magnetic category type.

The LT panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5/15A socket service outlet (single phase) and 1 no. CFL light with holder shall be provided in one of the compartments as service outlet in the panel. Panel shall be so designed as to have minimum 10% spare feeders/space. The complete panel shall be fuse less type, for control circuits 2A MCB's to be used.

All openings shall be covered by soft rubber gasket, enclosure shall be galvanized. Panel shall have suitable cable entry from bottom and suitable arrangement for aluminum cables for all MCCB.

The panel shall have type test certificates with short circuit and IP protection (C.P.R.I. Test)

Aluminum Bus Bar for Panel :-

The panel includes 415V, 600A, 3Ph, 50kA, 50Hz Electrolytic Aluminium bus bar of grade 63401 WP as per I:S 5082. The current density of Aluminum shall not be more than 0.8 Amps/sq.mm cross sectional area of Bus Bar. Aluminiu Bus bar shall be with removable glands plates, cable glands and sending and receiving ends, including connection with outgoing feeders complete in all respects. The support for busbar shall be nonhygroscopic non inflammable epoxy cast resin insulators. The minimum clearance between live part shall be 35-40mm. The Aluminium bus bar shall be with heat shrinkable PVC Slived Red,Yellow,Blue & Black as (RYB & N ) after temperature and incloser derating maximum allowable temp.of bus bar shall be 90 degree C. Feeders up to 100A shall interconnected by Solid Al. Bus from Main bus Bar and interconnections below 100A shall be with minimum 1.5/2.5/4/6 sq.mm. FRLS copper wires.

Note:- Inspection of LT Panel shall be carried out by Engineering Incharge / Consultant (Eletcrical) at panel builder site and for that, all arragements shall be made by the suppilier on prior information to parrent department.

SLD along with the G.A. drawing of LT Panel will be submitted by the contractor to Engineering Incharge or to the Consultant for approval . The above SLD and G.A. Drawing of LT Panel must be based on approved SLD.

Cost of Fabcrcation part of LT Panel & busbar system, in CRCA Sheet Steel enclosure (IP-43) with base channel, etc. without any components . Name of Panel Builder :- JMD Technocraft, Kokar, SPC Electrotech Pvt. Ltd. / EAP / Green Galaxy-Kolkata/ / TTS Systematix Private Ltd. Or any company approved Panel builder Set

The panel shall have type test certificates with short circuit and IP protection (C.P.R.I. Test) certificate.

Make of MCCB - L &T D-shine. / Legrand DPX³ / Schneider-NSX / Siemens - 3VL or 3VA

Make of MCB - L&T/ Legrand/ Schneider / Siemens (C Series MCB of 10kA)

The Name Plate for each incoming & outgoing feeder must be in Anodized Aluminium Sheet.

Make of Switch Gears and other components of above Panel shall be decided by the Consultant (elec.).Eengineering incharge.

Bill of Material of Academic Building LT Panel :-

Location in Electric Panel Room

INDICATING

1Set Multifunction Meter having LED display accuracy Class 1 as per IEC 62053-21, RS-485 port, (Ethernet/ Modbus ready suitable for monitoring and control with BMS System) in built RTC, Aux Supply: 44-277Vac/dc. Parameters: Volts, Amps, PF, THD, F, W, Wh, VA, VAh, Var, Varh, Runhrs, Onhrs Interrupts, THD for V&I per phase, individual harmonics for V&I upto 15th level complying with IEC61557-12. Min/Max for eight parameters. Make-L & T/ Schneider/ Satec/Siemnes Set

3 nos. CT 500/5VA -5 class one Epoxy resin cast CT (3 Nos.)=1 Set. Make:-Kappa / Matrix

3 set. Phase indicating light shall be protected by 2 Amps SP MCB's for incomer.Make-L& T./ AE/ Schneider.

INCOMER:-

1 no. 630A/FP/36KA/ MCCB with microprocessor adjustable release type with S/C, O/L, with extended front rotary handle & spreader links with ON OFF indication. (in coming cable 2 R, 300 Sq. mm. 3.5 core Al Ar. Cable)

OUT- GOING Feeders

1 no. 500A FP MCCB (36KA) with adjustable thermomagnetic release type with S/C & O/L protection with front rotary handle type with spreader links. (For Institute Building) 2 Run, 185 Sq. mm. 3.5 core Al Ar. Cable)

3 nos. 160A FP MCCB (25KA) with adjustable thermomagnetic release type with S/C & O/L protection with front rotary handle type with spreader links. For Girls Hostel & 1 no. for APFCR Panel and 1 no. as spare.

2 nos. 25A/FP/25KA/ MCCB thermomagnetic release type, and S/C , O/L protection, with Rotary Handle & Spreader links. (1 no. for pump motor, 1 no as spare)

6 no. 32A DP MCB C Series of 10 kA (Main LT Panel Room Outer lights and Gate lights, Guard Room, Main LT Panel ROOM- DB etc..)

2 no. 63A FP MCCB (25KA) with adjustable thermomagnetic release type with S/C & O/L protection with front rotary handle type with spreader links. As spares

External Lighting Panel in Separate chamber

INDICATING

1 no. 63A FP MCCB (25KA) with adjustable thermomagnetic release type with S/C & O/L protection with front rotary handle type with spreader links. As spare

3 nos. CT 100/5VA -5 class one Epoxy resin cast CT (3 Nos.)=1 Set. Make:-Kappa / Matrix

3 sets Phase indicating light shall be protected by 2 Amps SP MCB's for incomer.Make-L& T./ AE/ Schneider.

OUT- GOING

3 sets 25A/FP/25KA/ MCCB adjustable thermomagnetic release type, and S/C , O/L protection, with Rotary Handle & Spreader links. (2 No . For external lighting and 1 no. as spare)

2 nos. 4 pole 25 A Power Contactor NO NC of three phase of suitable rating. Make:- L&T / Siemens/Legrand

2 nos. Single channel Digital Time Switch. Make:- Alpha Rex 3 – CAT No. (D21 Astro, 1 Channel.)- 412654

2 nos. Four pole two way Lexic changeover with centre off 440V AC 32 to 40A to be used in case of timer failure to by pass the timer. (LEGRAND CAT No. 604022)

Total Cost of Main LT Panel.

A.P.F.C. Panel (Capacitor Bank) Auto Mannual Type

A.P.F.C. Panel (Capacitor Bank) Auto Mannual Type (APFC) Panel – 115 KVAR 8 Stage Capacitor Bank Details with mixed dielectric Ultra Heavy Duty Capacitors of following range and 1 Set 15 KVAR (2x7.5 KVAR) fixed Capacitor bank to take care of no load losses of Transformer :-

Supplying, designing and manufacturing in correct alignment position, effecting proper connection of all incomer and outgoing of A.P.F.C. Panel (Capacitor Bank / Auto Mannual) of 14 SWG CRCA sheet (2 mm) steel IP –42 floor mounting dust and vermin proof cubical type Capacitor Bank Panel suitable for operation on 415V, 50Hz, 3 Ph. AC supply and fault level 50kA with front operated construction including separate fabrication arrangement for fixing MCCB, , M.C.B., Capacitors, Contactors etc.

The sheet steel under go minimum 7 tanks treatment followed by finishing powder coating of minimum 60 micron thickness duly compartmentalized with locking arrangement duly fixed on Base Channel with proper lifting arrangement size – 50 mm x 50 mm x 4 mm having accessories mounted inside the cubical panel, earthing with 2 Nos. earth studs and Capacitors having earthing arrangement.

All openings shall be covered by soft rubber gasket, enclosure shall be galvanized.

Aluminum Bus Bar for Panel :-

Bus bar shall be suitable for 250A, TPN busbar chamber of suitable length with (E91EWP) Eletrolytic Aluminum busbars. All busbars and interconnections shall be of suitable size Aluminum busbar, current density of Aluminum shall not be more than 0.8 Amps/sq.mm cross sectional area of Bus Bar with removel gland plates, cable glands, at sending and receiving ends, encluding connections with outgoing feeders complete in all respect and all interconnections shall be made with 2.5, 4 and 6 sq.mm. PVC Cu.wire. The Aluminium bus bar shall be with heat shrinkable PVC Slived Red,Yellow,Blue & Black as (RYB & N ) after temperature and incloser derating maximum allowable temp.of bus bar shall be 90 degree C

Panel Size - As per Drawing and shall be provided at the time of work order.

Panel Builder will provide shop drawing SLD & GA drawing along with BOM with CAT. No. of each and every components and switch gears of APFC Panel for approval of Consultant. Panel Builder shall visit the site before manufacturing the Panel. Inspection of the Panel shall be carried out at Panel Builder's factory by the Consultant before final delivery for that all arrangements shall be made by the panel Builder.

The Name Plate for each feeder must be in Anodized Aluminium Sheet.

The Panel Builder must be CPRI approved. Panel builder must produce test certificate for Type Tested & Short Ckt withstand capacity as per IEC-60439-II from CPRI.

1 Set Of Fabrication part of APFCR Panel & busbar system, in CRCA Sheet Steel enclosure (IP-42) without any components & its busbar system, in CRCA Sheet Steel enclosure without any components. Name of Panel Builder :- JMD ELECTROTECH, KOKAR, ARNAV POERTECH, TATISILWAY, TTS Systematix Private Ltd, Tatisiway, Meditron, Meshra, Ranchi or any approved Panel Builders of above make Switch Gears. (PART A) Set

Location : LT Panel Room. (Basement)

Make of MCCB - L&T D-Sine/ Legrand DPX³ / Schneider-NSX / Siemens - 3VL.

Make of MCB - (10kA-D-Series.) L&T U Version/ Legrand-Dx³/ Schneider-Acti / Siemens.

All MCCBs shall be as per IS/IES:60947-2. and MCBs shall be as per IS:8828-1993.

Bill of Material in A.P.F.C.R. Panel :-

2 Nos. 63A TP / MCB / 10kA (D tripping characteristic) for 25 KVAR Capacitor.

2 Nos. 40A TP / MCB / 10kA (D tripping characteristic) for 20 KVAR Capacitor.

2 Nos. 16A TP / MCB / 10kA (D tripping characteristic) for 7.5 KVAR Capacitor.

2 Nos. 10A TP / MCB / 10kA (D tripping characteristic) for 5 KVAR Capacitor.

Incomer

1 No. 160A FP MCCB (25KA) with thermomagnetic release and with S/C & O/L protection with front rotary handle and spreader links.

Indication:-

16 Nos. LED Indicators sets (220V) (R – 8/ G – 8 = 16 Nos.) self illuminated Red-Green (ON-OFF) push buttons, each backed up with Push Button (Red- Yellow) shall be provided for each capacitor unit to indicate the status of the unit. Make-L& T./ AE/ Rishabh.

3 Nos. LED indicatore (R Y-& B) of 220V. with 2A SP MCB protection. Make- Legrand / L&T / Rishabh )

3 Set CT 200/5VA -5 class one Epoxy resin cast CT (3 Nos.)=1 Set. Make:-Kappa / Matrix / L&T

1 Nos. 16A – 2 pole / 2 way Rotary Switch. Make:- Reputed

8 Nos. 10A Toggle Switch SP – HT Make:- Reputed

1 Set Power factor correction Intelligent controller Relay with 8 steps and multi -functional display, APFCR with 8 steps. The relay shall be sensitive to pick up 1% of rated current and correct the P.F accordingly. Also the relay shall display the harmonic level of system. Make- L&T, Seimens.

1 Set VAF + Power Factor, 3Ph, Class 1, 5A, Meter Make- L&T / Seimens / Scheneider.

The capacitors for Auto Mannual Type (APFC) Panel – 115 KVAR 8 Stage Capacitor Bank Details with following parameters:- (BOX SERIES OF 440V)

1. MPPXL ,440V/50Hz,TP Shunt mixed dielectric heavy duty Capacitor.

2 Lower operating losses - 0.35W/KVAr).

3. Over current withstand capability - 1.8 times rated current.

4. Inrush current withstand capability - 300 times rated current.

5. Operating Life- 130000 hours.

6. Numbering of switching- 8000 operations per year.

7. Insulation Class H.

Mixed dielectric Ultra Heavy Duty Power Resin filled Capacitor Make:- Legrand/ L&T / Schneider -Meher

2 Nos. 25 KVAR (Power Capacitor) Ultra Heavy Duty.

2 Nos. 20 KVAR (Power Capacitor) Ultra Heavy Duty.

2 Nos. 7.5 KVAR (Power Capacitor) Ultra Heavy Duty.

2 Nos. 5 KVAR (Power Capacitor) Ultra Heavy Duty.

Total - 115 KVAR.

Capacitor Duty Contactors :- (NO/NC) Make:-Seimens / L&T.

2 Nos. For 25 KVAR – MOC 25 1NO & 1 NC (63A) (Suitable for 25 KVAR capacitor bank).

2 Nos. For 20 KVAR – MOC 20 1NO & 1 NC (40A) (Suitable for 20 KVAR capacitor bank).

2 Nos. For 7.5 KVAR – MOC 15 1NO & 1 NC (16A) (Suitable for 7.5 KVAR capacitor bank).

2 Nos. For 5 KVAR – MOC 15 1NO & 1 NC (10A) (Suitable for 5 KVAR capacitor bank).

1 no. 63 A/FP/MCCB/25KA as incomer and (7.5 x 2) = 2 Sets = 15 KVAR fixed Capacitor Bank with all required accessories like capacitor duty contactor (For each 7.5 KVAR –MOC 8.5 1NO & 1 NC (16A),) each capacitor shall with 16A TP / MCB / 10kA (D tripping characteristic) R & Y indicators, toggle switch etc. shall be fixed capacitor to take care of the no load losses of the transformer. (1 Set)

Total Cost of 115 KVAR APFCR Panel with 15 KVAR (7.5 x 2) as Fixed Capacitor Bank.

PUMP MOTORS:-

Supply, fitting, fixing, installation and commissioning of 3.7KW/5HP/3Ph/414V/2950RPM electric motor with pump complete set monoblock type along with base channel and civil foundation work, suction - 3" and delivery - 2.5" excluding delivery and suction pipe, including nut bolts, washer & required size & length of Channel to be installed at pump house for lifting water from sump to over head tank. (the cost of plumbing materials like pipes etc. are not included.) (Make:- Kirloskar Model NO. KDS-527- 3" & 21/2") / Crompton / G.E.C.)

Supply, fitting, fixing, installation and commissioning of DOL starter for 5HP motor pump of 440V to be installed at pump house including drilling holes in metal board, making connections, etc. as required, to be mouned on wall with iron strip 32mmx5mm with G.I. Nut bolts etc. as required and as per the direction of E/I.. (Make:- L&T- MK-1 / C&S/ Crompton)

Feeder For Fire Fighting System :-

Supply, fitting, fixing of 125A FP / 36kA MCCB (thermomagnetic release type) with rotary handle & spreader links and 125A four pole on load Change changeover along with enclosure. (Separate arrangement direct from Transformer to fire fighting pump panel)

1 no. 125A FP MCCB (36KA) adustable thermomagnetic release type with S/C & O/L protection with front Rotary handle, speader links. Make - L&T D-Sine/ Legrand DPX³ / Schneider-NSX / Siemens - 3WL.

1 no. 125A (4 Pole) on load changover without enclosure Panel mounted, open execution. Make- L&T/Havells/Socomec..

SAFETY ITEMS PANEL ROOM :-

Supply and laying of 1000 mm x 600 mm x 12 mm thick chequered Rubber Matting of tested quality to with stand 15KV dielectric strenght as per IS:5424 complete in all respects.

Supply of 440V grade Rubber Hands Gloves. As per IS:4770.

Supply of First Aid Box with all necessary materials and medicine as approved by Indian Red Cross / St. Jhon's conforming to IS:2217.

Supply and fixing of Shock Treatment Chart with glass in Aluminium frame and to be fixed on wall in Hindi and English.

Fire Extinguisher:-Supplying, commissioning and fixing of Carbon dioxide (CO2) type fire extinguisher of 4.5 Kg. Capacity duly charged confirming to IS: 2828. Make:- Minimax,Real value/Firex/Deflame. C02 gas Type, 4.5 Kg capacity (IS: 2828)

Supplying and Fixing 3 Nos. 9 Ltr capacity G.I. buckets duly painte white inside and red oxide paint out side and written 'FIRE' with white paint and filled with dry sand and mounted on MS angle iron bracket of size 50x50x6mm thick and 1200mm long including grouting in wall/floor etc. as required confirming to IS:2546-1974.

Providing, fitting, fixing, fabricating, erecting of MS angle of section 50 mm x 50 mm x 6 mm size for PCC trench to make support for MS iron plate to be fixed on every after 300 mm in PCC trench.

Providing, fitting, fixing, fabricating, erecting of MS Plate of 12 mm thick for covering PCC cable trench on the support of iron angle each piece of MS plate shall be 600 mm (L) x 800 mm (W). (To cover the PCC trench in electrical panel room)

Providing and fixing of XLPE 11 KV, grade as per IS 7098 (Part-II)- 1985, aluminium armoured cable. Make:- Gloster/Havells / Finolex / Polycab

3 Core 70 Sq.mm. 11KV

FOR 11 HT CONNECTION CHARHES & HT METER & ACCESSORIES REQUIRED CONTROL CABLES etc CHARGES 5% OF TOTAL OF EXTERNAL ESTIMATE

Wipro Make Fenix Desk Table , 1200 X 600 X 740 Table tops are in 25mm thick prelam particle board conforming to IS : 12823 Interior Grade with 2mm thick PVC edge banding. Understructure is made up of MS duly powder coated to the thickness of 50-60Micron. 50X50 Square Leg support beneath the Table Top. Prelam Modesty Panel to maintain privacy.The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro make Smart Visitor Fabric cantilever Chair .The back is made up of foam upholstered Ply having High resilience foam on the back. The complete back is contoured to provide the needed lumbar support for long seating hours. The seat is made up of moulded foam, upholstered with mesh fabric having high tensile strength. Back Rest :- 790mm High and 500mm Width, Seat :- 460mm width and 470mm depth, Seat to Back rest height :- 650mm.The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make Fenix linear workstation of size 900W X 525D X 1140H with Laminated Glass Screen. Table top : 25mm thick particle board with 2mm PVC edge banding. MS Powder coated 50X50 Straight Square legs and Mast leg for wire management in understructure. The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro make Wudmate chair The seat and back shall be made up of wood veneer with foam back. The chair can also be provided with fixed wooden armrests .The dimensions of back shall be 49 cm (W) X 37 cm (H) and of seat shall be 51 cm (W) X 50.0cm (D). The Seat and Back Inner shall be upholstered with PU foam and fabric and shall be assembled over the seat and back. The chair is made of Rubber wood veneer with thickness of the leg 25 mm and width of the leg at 28mm. Seat Height - 46 cm, Height-83.0cm, Width & Depth of Chair as measured from base - Width-60.0cm and Depth-56.0 cm.Dimensions tolerance / variations shall be within +/- 1 cm. The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make Hangout Prelam Single Bed (1000 (W) x 650(H) x 2025(L) for mattress size of 915 (W) x 1981 (L) ).The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm.The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure.The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm.The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make Hangout Bed Side Table 400Lx400Dx415H. Size 400W x 400D. The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make WUDSAFE-Prelam full height storage 750 mm X 425 mm X 1986 mm.Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. PVC edge banding are imported from Rehau or Dolken of Germany.The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make Fenix Reading Table , 1800 X 900 X 740 Table tops are in 25mm thick prelam particle board conforming to IS : 12823 Interior Grade with 2mm thick PVC edge banding. Understructure is made up of MS duly powder coated to the thickness of 50-60Micron. 50X50 Square Leg support beneath the Table Top. Power Mast leg for wire management from the Floor. Power Points can be accomodated on the Metal Power Beam/on the Access Flaps at the Table Top. The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make Fenix Reading Table , 1050 X 900 X 740 Table tops are in 25mm thick prelam particle board conforming to IS : 12823 Interior Grade with 2mm thick PVC edge banding. Understructure is made up of MS duly powder coated to the thickness of 50-60Micron. 50X50 Square Leg support beneath the Table Top. Power Mast leg for wire management from the Floor. Power Points can be accomodated on the Metal Power Beam/on the Access Flaps at the Table Top. The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make WUDMATE Chair with arm, wooden chair made of red Miranti wood as per drawing. Back : Height: 1000 mm x Width: 425 mm Seat : Height: 450 mm x 480 mm. All wooden part will be as per drawing. Seat will be covered by foam wrapped with fabric as per required colour.The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make Fenix Common Room Table , 3300 X 1100 X 740 Table tops are in 25mm thick prelam particle board conforming to IS : 12823 Interior Grade with 2mm thick PVC edge banding. Understructure is made up of MS duly powder coated to the thickness of 50-60Micron. 50X50 Square Leg support beneath the Table Top. Power Mast leg for wire management from the Floor. Power Points can be accomodated on the Metal Power Beam/on the Access Flaps at the Table Top. The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make WUDMATE Chair with arm, wooden chair made of red Miranti wood as per drawing. Back : Height: 1000 mm x Width: 425 mm Seat : Height: 450 mm x 480 mm. All wooden part will be as per drawing. Seat will be covered by foam wrapped with fabric as per required colour.The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make Hangout Prelam Single Bed (1000 (W) x 650(H) x 2025(L) for mattress size of 915 (W) x 1981 (L) ).The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm.The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure.The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm.The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make Hangout Bed Side Table 400Lx400Dx415H. Size 400W x 400D. The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Wipro Make WUDSAFE-Prelam full height storage 750 mm X 425 mm X 1986 mm.Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. PVC edge banding are imported from Rehau or Dolken of Germany.The product must be from a Manufacturer having ISO 9001,ISO 14001 ,ROHS ,Indian Design Mark ,Latest BIFMA and IGBC certificates for few of its products.

Add 18% GST

Add 1% Labour Cess

M/S BHRIGU NATH SINGH