COMPREHENSIVE REPAIR / MAINT TO BLDG NO RA-1, P-192 AND OTHER HQ COMMAND OTM BLDGS INSIDE VIJAY DURG UNDER GE (FW) KOLKATA

Amount

M&L Examining concrete by tapping with light hammer and marking of the loose concrete areas of structural elements in straight line geometrical forms, grooving the edges same with grinder upto 5-10 mm depth without damaging existing rebars, carefully removing unsound weak/ loose concrete/ cover & concrete around the rebars upto 10 mm depth by low impact high frequency hammer/ chipper without damaging the sound concrete, daily cleaning and stacking of debris at prescribed location in polypropylene/ paper bags, disposing off the debris so generated on weekly basis outside the premises. etc, complete with necessary scaffolding complete all as specified and directed.

Cleaning as directed & specified all rust/ scales/corrosion from reinforcement bars using rust remover Reebaklens RR or equivalent - Rust remover, cleaning and etching agent, having Specific Gravity 1.16 - 1.22 @ 25°C. Reebaklens RR cleaning agent is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear green solution. Application of Reebaklens RR with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours followed by cleaning the surface with wire brush and washing surface with fresh water as required to exposed reinforcement bars complete as specified. Item rate is inclusive of materials all labour, tools and tackles, and transportation etc. complete as per specification and as directed by Engg.-in charge.

M&L for drilling and fixing 12mm dia upto 50-75 mm long injection packer in structural members at the interval of 300mm in staggered manner in reinforced concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Return Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of grouting gun fix inside the hole by using Epoxy chemical anchoring Lokfix E77 or approved equivalent to ensure complete sealing and allow curing system for minimum of 40 Mins before grouting including nozzle projections, excess putty, if any over concrete element by grinding, levelling and finishing the external surface , after completion of work etc. complete with necessary scaffolding, all as specified and as directed by EIC.

Providing and executing injection/pressure grouting in cracks in the parent concrete by fixing PVC nipples at 150 mm to 200 mm distance or specified distances as per design and detailed specifications. Pressure grouting using low viscous epoxy grout Conbextra EP 10(M) of Fosroc or equivalent having mix density 1060 kg/m3,Compressive Strength(ASTM D695)-60 N/mm2,Tensile Strength(ASTM C 304-97)-20 N/mm2,Flexural strength(BS 6319 Part 4)-45 N/mm2.Pressure grouting shall be done at required pressure etc. shall complete as directed by EIC.

Providing & applying inhibition coats/system to exposed reinforcement bars after drying & also new bars after cleaning & removing scales and rust completely as specified. Nitozinc Primer or equivalent - Two component epoxy zinc rich primer based on metallic zinc and epoxy resin which on mixing gives a grey coloured liquid. An Anti corrosive coat contents Active 'Zinc-rich' system which combats corrosion by electro chemical means. having specific gravity of 1.75, Adhesive bond strength > 1.5 N/mm2 Zinc content >84 % by weight, 40 microns DFT, Fully dry/ Recoatable - 45 minutes to 1 hour. Typical application includes surface preparations by cleaning steel surface to a bright condition paying particular attention to the back of exposed steel bars, mixed two components slow speed heavy duty drill fitted with a paddle, applying unbroken coat with suitable brush and allow to dry, after 30 mins apply second coat to ensure complete cover to exposed steel/ rebar etc complete. Total Dry film thickness is 40 microns. Item rate is inclusive of materials all labour, tools and tackles, and transportation etc. complete as per specification and as directed by Engg.-in-charge.

Providing and applying Epoxy bonding agent on the prepared surface to receive polymer modified mortar/polymer modified micro concrete, with two component epoxy based bonding coat Nitobond EP Std of Fosroc make or equivalent, having Compressive strength(BS 6319 Pt.2)- 40 Mpa at 7 days, Flexural strength strength(BS 6319 Pt.3)- 25 Mpa at 7 days, Tensile strength (BS 6319 Pt.7)- 15 Mpa at 7 days, Bond Strength (ASTM C881)- 11 Mpa at 7 days, having an over lay time of 3 Hrs at 35 °C. Laying of reinstatement polymer modified mortar or micro concrete shall be completed within the overlay time of bonding coat. The bond coat act as a bonding coat between old and new concrete. Item rate is inclusive of materials all labour, tools and tackles, Shuttering Supporting material and transportation etc. complete as per specification and as directed by Engg.-incharge.

Providing and laying of polymer modified single component fibre reinforced, thixotropic, dual shrinkage compensate cementitious patch repair mortar Renderoc HSxtra of Fosroc make or equivalent that achieves compressive strength (BS 6319 Pt. 2)-50 Mpa at 7 day & 70 Mpa at 28 days, Tensile Strength(BS 6319 Pt.7) > 4 Mpa at 28 Days, Flexural Strength(BS 6319 Pt.3)>9 Mpa at 28 days, Fire resistance (EN1504-3 cl 5.5)- Class A1. Finishing the same with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface on the beams, slabs, piles etc., where the thickness of application is less than 50 mm in patches as per specification after applying of epoxy bonding coat. Item rate is inclusive of materials all labour, tools and tackles, and transportation etc. complete as per specification and as directed by Engg.-in-charge Note Work to be executed by the authorized applicator of manufacturer only.

Demolition of Brick work / stone masonry built in cement mortar and removing the debris from MD land complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

Dismantling old/unserviceable Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings or any description all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including roof coverings complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in1:4 cement mortar complete all as specified and directed.

M &L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified.

M&L RCC (nominal mix) type B1 1:2:4 (20 mm graded stone aggregate) using cills, steps, plinth courses, string course, coping and other similar bands etc complete all as specified.

M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1: 6 finished fair & even & smooth without using extra cement, all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work/ concrete on ceiling surfaces in CM 1.3, finished fair & even & smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair face of brick work or concrete surface in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even. complete all as specified and directed. ( Note -W.P.C. shall be measured and paid separately . )

Supply only integral water proofing compound all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. all as specified.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc of Fe 410W (Gde E-250) quality 'A' etc complete all as specified and directed.

M&L welded steel wire fabric weight n exc 4 kg/sqm complete and fixed to wood or steel members, all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 including necessary formwork complete all as specified.

S&F Mild steel wind ties for roof including securing bolts, posts including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets including all necessary drilling, bolting or rivetting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Cutting Holes in brick walls in cement mortar for inserting holdfast ,pipes or steel sections and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n exc one brick etc. all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws etc., complete all as specified and as directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws etc., complete all as specified and as directed.

M&L 1.00 mm thick Plain, black, mild steel sheeting, in wall cladding, steel gates, in ridges, hips, valley gutters, drip and straight flashings and similar work cut to size, holes punch headed screws clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up mitred angle etc are required complete all as specified and directed.

S&F wind driven turbine ventilator (mill finish) powder coated hurricane 600 with FRP base to match roofing sheet and variable angle elbow with and including flashing sheet fixed with self tapping screws etc complete all as specified.

M&L 25 mm thick cement concrete 1:2:4 , type B0 using 12.5 mm graded aggregate as in sub base for floor complete all as specified and directed.

M&L for 18-20 mm thick Granite slab of approved quality (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick for laying floor finishes in CM 1:4.as specified.

M&L for Providing edge moulding to 18-20mm thickness of granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

M&L cement concrete Type C2 (1:3:6) using 40 mm graded stone aggregate, 75 mm thick as in plinth protection, laid in alternate bays, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour for providing Plain Cement Concrete(1:5:10) type E2 using 40mm graded aggregate as in sub base of floor all as specified and directed

M&L for Vitrified Ceramic tiles 8 to10 mm thick light shade (of square shape) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM 1:4 all as specified and directed.

All as per item no 38 but using as skirting/dado including screed bed10 mm thick in CM 1:3 for wall tiling .

M&L Vitrified ceramic tiles dark shade/double charged/ultra charged of 9 or 10 mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM 1:4. complete all as specified and directed.

All as per item no 40 , here-in-before but as in skirting on vertical surfaces including screed bed 10 mm thick cement mortar 1:3 for wall tiling in complete.

M&L non skid ceramic coloured digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles, including screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM 1:4 all as specified and directed.

All as per item no 42 , here-in-before but as in skirting on vertical surfaces including screed bed 10 mm thick cement mortar 1:3 for wall tiling in complete.

M&L non skid ceramic coloured digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles, including screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM 1:4 all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7/600x 300x 7mm thick as on vertical surfaces such as wall, dado, skirting etc set and jointed in neat cement slurry and pointed in colour cement to match including screed bed10 mm thick for wall tiling etc. in CM 1:3. complete all as specified.

Dismantling of 100mm bore cast iron (sand cast) soil, waste or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required all as specified and directed.

Dismantling of 150mm bore cast iron (sand cast) soil, waste or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required all as specified and directed.

S&F 100 mm bore cast iron (sand cast) soil and waste in any length with or without ears, with cement joints, fixed to walls complete all as specified.

S&F 150 mm bore cast iron (sand cast) soil and waste in any length with or without ears, with cement joints, fixed to walls complete all as specified.

S&F 100 mm bore cast iron (sand cast) soil and waste in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

S&F 100 mm dia Cl branch pieces complete all as specified.

S&F 100 mm dia Cl bend complete all as specified.

S&F 100 mm dia Cl branch pieces with oval access door complete all as specified.

S&F 100 mm dia Cl bend with oval access door complete all as specified.

S&F 100 mm dia Cl sanitary connection socket to fit WC outlet complete all as specified.

S&F for cast iron floor trap/nahani trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, 100mm dia outlet complete all as specified.

S&F 150 mm bore Cl (sand cast) bend any radius, diminishing pieces or tapers complete all as specified.

S&F 150 mm dia Cl (sand cast) branch, with or without ears, complete all as specified.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay. including bolts and nuts and securing ends of stays to wall or roof of 100 mm dia of pipes.

All as Ser item No 59 but 150 mm dia of pipes.

Taking up or down 15 mm bore steel tubing and including cleaning for refixing or removal to store complete all as directed.

Taking up or down 20 mm bore steel tubing and including cleaning for refixing or removal to store complete all as directed.

Taking up or down 25 mm bore steel tubing and including cleaning for refixing or removal to store complete all as directed.

Taking up or down 40 mm bore steel tubing and including cleaning for refixing or removal to store complete all as directed.

S&F steel tubing water tubing medium grade, galvanised with all fittings of 15 mm bore and fixed to wall and ceiling or laid in floors.

All as Ser item No 65 above but fixing only.

S&F steel tubing water tubing medium grade, galvanised with all fittings of 20 mm bore and fixed to wall and ceiling or laid in floors.

All as Ser item No 67 above but fixing only.

S&F steel tubing water tubing medium grade, galvanised with all fittings of 25 mm bore and fixed to wall and ceiling or laid in floors.

All as Ser item No 69 above but fixing only.

S&F steel tubing water tubing medium grade, galvanised with all fittings of 40 mm bore and fixed to wall and ceiling or laid in floors.

All as Ser item No 71 above but fixing only.

S&F 40 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as specified.

Disconnecting existing water tanks exc 500 & n.exc 1000 ltr of capacity, setting aside (or lowering if required) for repairs, etc and hoisting if required re-connecting and re- fixing in position after cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc all as specified. (Note : Date of cleaning deemed to be include in quoted rate).

All as Ser item No 74 above but exc 1000 ltr &n.exc 2000 Itr of capacity.

Supply, hosting and fix 1000 liters rotational moulded polythene water storage water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (ISI marked) all as specified and directed.

All as Ser item No 76 above but of 2000 Itr of capacity.

S&F in repairs 15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/20mm - 210gms/25mm-455gms/40mm - 690 gms) complete all as specified and directed.

S&F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/20mm - 210gms/25mm-455gms/40mm - 690 gms) complete all as specified and directed.

S&F 2.5 mm Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strain- ing bolts or fixing around any diameter of pipe, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

S&F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete make Cera/Parryware (Slimline)/Hindware all as specified and as directed.

S&F for plastic water closet seat cover colour/ white, closed pattern with flat bottom and MS CP or aluminium hinging device as in repair of make Cera/Parryware/Hindware alumınised hinging device as in repair complete all as specified and directed.

S&F in repair vitreous china wash hand basin white size 550x400 mm including bracket but excluding taps, waste pipes, chain and plug etc complete all as specified

S&F vitreous china table top wash hand basin white size 420 x 420 x 135 mm including all accessories complete all as specified Make jaguar cat no ARS-WHT-39901 or equivalent make specified in tender.

S&F Table Top Basin Thin Rim, Shape - Triangular having Size: 600x410x100 mm.complete all as specified and directed. (Make :- Jaguar cat no LYS-WHT-38901N or equivalent make specified in tender.

S&F in repairs PVC flushing cistern push button / handle type of 10 Itr capacity coloured complete with all fitting fixed to with WC including PVC flush pipes, brackets etc complete all as specified and directed.

S&F in repairs vitreous china urinal, full stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including PTMT urinal spreader, coupling, 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified .

S&F in repairs vitreous china urinal partition white of size 310x700mm complete all as specified.

S&F in repair PVC waste pipe 38/40 mm dia, 800-900 mm length complete all as specified and directed.

S&F PVC connection 450mm long of PTMT 15mm bore ofcomplete all as specified and directed.

S&F soap dispenser with glass bottle all as specified and directed. (MAKE : JAGUAR, Cat no. AKP-35735P/ PARRYWARE or equivalent make specified in tender.

S&F in repair chromium plated fancy type Soap dish holder complete all as specified and directed. Make :Cat No ACN-1131N of make Jaguar or equivalent make specified in tender.

S&F in repair chromium plated flap toilet paper holdercomplete all as specified and directed. Make: Cat No. CPA-16 of Make Prayag or equivalent make specified in tender.

S&F in repair 15mm bore angle valves, fancy type chromium plated with long shank and cup (Concealed type), all as specified

S&F in repair PVC waste pipe 32 mm dia, 800-900 mm length complete all as specified and directed. Make: cat no PTA-62 of Make- Prayag or equivalent make specified in tender.

S&F Corner Glass Shelf (with Bracket) as specified and directed. MAKE : JAGUAR, Cat no. ACN-1173/ PARRYWAREor equivalent make specified in tender.

S&F in Repair chromium plated ABS body health faucet with 1 mtr tube and hookcomplete all as specified and directed. Make :Cat No CPHF-2 of Make Prayag or equivalent make specified in tender.

S&F in repair Brass chromium plated Grating of Size 102 mm dia with waste holer complete all as specified and directed. Make: Cat no PFT-24 of Make Prayag or equivalent make specified in tender.

S&F in repair Brass chromium plated Grating of Size 102 mm dia complete all as specified and directed. Make: Cat no PFT-23 of Make Prayag or equivalent make specified in tender.

S&F in repair chromium plated 15 mm bore two way bib cock all as directed. MAKE : JAGUAR, Cat no. LYR-38041/ PARRYWARE or equivalent make specified in tender.

S&F in repair wall Mounted cascade NXT closet white(Cat no C0208), Regular seat cover (E8299), Cistern set including dual flush fittings (Cat no C0771) with complete arrangement complete all as specified and directed.

S&F in repair wall hung closet with seat cover white of size as specified complete all as specified and directed. Make: cat no PSW-34 of make prayag or equivalent. As specified and directed.

S&F floor Mounted coupled closet white Closet , Regular seat cover , Cistern set including dual flush fittingswith complete Arrangement complete all as specified and directed Make : (Cat no C0765) of Parryware or equivalent make specified in tender.

S&F in repair Astute Waterless Urinal white complete all as specified and directed. Make: C0586 Parryware or equivalent make specified in tender.

S&F Pillar Cock Auto Closing System with 65mm Extension Body of Brass complete all as specified and directed . MAKE : JAGUAR, Cat no. RS-031L65/ or equivalent make specified in tender.

S&F in repair Brass pillar taps fancy type chromium plated swan neck complete all as specified and directed . Make:Cat No 7814-N of Make Prayag or equivalent make specified in tender.

S&F in repair self closers pillar taps fancy type chromium plated brass complete all as specified and directed Make:Cat No CPA-36 of Make Prayag/ or equivalent make specified in tender.

S&F in repair self closers Bib taps fancy type chromium plated brass complete all as specified and directed Make:Cat No CPA-37 of Make Prayagor equivalent make specified in tender.

S&F in repair Bib taps with aerator fancy type chromium plated Brass complete all as specified and directed. Make:Cat No G4880A1 of Make Parryware or equivalent make specified in tender.

S&F brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified

S&F towel ring fancy type chromium plated complete all as specified and directed. Make: Cat No T-6904A1 of Make Parryware or equivalent make specified in tender.

S&F in repair 15mm bore Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange. fancy type chromium plated complete all as specified and directed. Make:Cat No PRS-077 of Make Jaquar or equivalent make specified in tender.

S&F in repair regular or any connected pattern seat cover white or off white suitable of cascade closet floor or wall mounted with complete arrangement, complete all as specified and directed.

S&F in repair Opal Prime Tall boy sensor faucet for wash basin (Battery operated) of Cat No SNR-15017PM of Make Jaquar or equivalent make specified in tender.

S&F in repair chromium plated brass bottle trap 12 inch (Project) with complete arrangement etc complete all as specified and directed.

M&L for preparation of new surfaces and applying two coats of OBD over alkali resistant primer after applying 3 mm thick wall care putty on walls, all as specified and directed.

M&L for preparation of new surfaces of ceiling and applying two coats of OBD over alkali resistant primer after applying 3 mm thick wall care putty on walls, all as specified and directed.

M&L for preparation of new surfaces of walls and soffit of chajja, roof slab etc by cleaning, brooming, rubbing and scrapping as required using broom, emery paper putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt headgear etc, finishing the surface with 1mm thick exterior wall putty for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified

M&L Mirror polishing on marble/granite/kota stone/stone work where ever required to give high gloss finish complete all as specified and directed.

M & L for preparation of surfaces of walls and applying two coat of Oil Bound Distemper over a coat of alkali resistant primer and 1 mm thick wall care putty after complete removal of existing treatment, all as specified and directed

All as Ser item No 123 above but on ceiling

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

All as Ser item No 125 but on steel surfaces.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer after complete removal of old paint by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying coat of white wash complete. all as specified and directed.

All as Ser item No 129 above but ceiling.

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed

All as Ser item No 131 above but on ceiling

M&L for preparation of old painted steel & iron surfaces of any description over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and as directed

M&L for preparation of new steel and iron surfaces of any description, n. exc 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed

M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed

M&L for Bees-wax polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces, previously polished as specified and directed.

M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on one or more coats on old work complete as specified and directed.

M&L preparing old surfaces of any description and applying one coat of synthetic enamel paint over brick, stone, concrete, asbestos cement surfaces or plastered surfaces complete all as directed.

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc by cleaning brooming rubbing and scrapping as required using broom emery paper, putty blade/scrapper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt headgear etc including filling cracks upto 5 mm with and including suitable elastomenc crack fill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed

M&L for cleaning of roofs by getting out growing vegetation's / grass & brooming down with removing it out of MD land premises of including repainng to damaged surface of roof by applying two coats of tartaric acid over two coats of CM (1:3) with mixed with 3% WPC & sealed with 85/25 hot blown grade bitumen complete in patch not exceeding 2.0 Sqm each including necessary form work, complete all as directed by Engineer in Charge.

M&L for repairing of damaged portion of mouth at tarrace / roof surface of rain water pipe by cleaning and repairing to mouth of RWP by using CM (1:3) with mix with liquid WPC & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof surface fully leak proof complete all as directed by Engineer in Charge.

M& L for repair to chajja area exc 2 Sqm and n exc 4 sqm each including dismantling of upward facia, cutting of reinforcement, plaster1:3 / pcc type B0 on top with WPC, benching/haunching. repair to broken plaster with dubbing coat including necessary form work complete all as directed.

M& L for repair to chajja area exc 1 Sqm and n exc 2 sqm each including dismantling of upward facia, cutting of reinforcement, plaster 1:3 or PCC type B0 12:4 (using 12.5 mm stone aggregate) on top with WPC, benching/haunching repair to broken plaster with dubbing coat including necessary form work complete all as directed.

M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along wall using chemical emulsion one litre per hole at 300mm internals including drilling holes at 45 degree and replugging them with cement mortar 1:2 to match the existing, all as per manufacturer instruction etc complete all as specified and directed. (Note The process shall be carried out Manufacturer rep only).

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm each and not exceeding 4 sqm removing from the site complete all as specified and directed.

Taking down shutters of any description area not exceeding 1 sqm each removing from the site complete all as specified and directed.

Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description area exceeding 2.00 sqm each removing from the site complete all as specified and directed.

M&L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 35 mm thick 2nd class HW, plain framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.

Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels. commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match. complete all as specified and directed

S&F factory made single extruded WPC (Wood polymer composite) solid door/ window / ceosetory windows & other frames/chowkats of size 65x100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made).

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 5mm thick Moulded prelim PVC sheet on the front face & 5mm plain colour PVC prelim sheet on back face supplying and fixing in the frame at site as per specification & drawing

Supplying and installing uPVC- 1sash casement door made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 69mm x 50mm and sash 58mm x 93 x 54mm with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 (without glass)5 and Environmental Management System ISO 14001-2015 Make Kimberling or equivalent model in Fanesta & in other approved makes.

S&F Stainless steel hinges of 100 mm size of SS-304,complete all as specified and directed. Make: Cat no PHW-57 of make Prayag or equivalent make specified in tender.

S&F Stainless steel handle of 200 mm size of SS-304, Cat no PHW-108 complete all as specified and directed. Make Prayag or equivalent make specified in tender..

S&F Stainless steel Tower bolt Square of 200 mm size of SS-202complete all as specified and directed., Cat no PHW-93 of make Prayag or equivalent make specified in tender.

S&F Stainless steel L drop bolt of 300 mm size of SS-202, complete all as specified and directed.Cat no PHW-7 of make Prayag or equivalent make specified in tender.

S&F Butt Hinges medium weight cold rolled stainless steel 100mm long complete all as specified

S&F Butt Hinges medium weight cold rolled stainless steel 75mm long complete all as specified

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed

S&F aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed

S&F Aluminium anodised bow handle fabricated type extruded section of 150mm long complete all as directed

S&F Aluminium anodised bow handle fabricated type extruded section of 125mm long complete all as directed

S&F Aluminium aodised sliding door bolts of 250mm long with hasp and staple(bolt type) and fixing clips of sheets cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F Aluminium aodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed

Supply and fixing in repairs 150mm extruded brass handles, cast type, polished bright complete all as specified and as directed.

Supply and fixing in repairs 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed.

Supply and fixing in repairs 300 mm long brass sliding door bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed.

Supply and fixing in repairs 250 mm long brass, sliding door bolt with sand or die-cast brass hasp staple (bolt type) and filing bolt with rolled or drawn brass bolts complete all as specified and as directed.

S&F in repair powder coated Z type aluminium handle/American handle/round handle suitable for aluminium windows/door. all as directed.

Providing and fixing stainless steel (SS-304 grade) friction hinges of Size 250 x 19 x 1.9 mm to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as directed.

Taking down aluminium frame with shutters of any description nexc 1.50 sqm each. complete all as specified.

Taking down aluminium frame with shutters of any description exc 1.50 but n.exc 2.0 sqm each, complete all as specified.

Taking down aluminium shutters of any description exc 1.0 but n.exc 2.0 sqm each. complete all as specified.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc. complete all as specified.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (01 No) hinges type B-21 100 mm long (2 No) suitable handles etc. complete all as specified.

S&F in repairs anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200 mm centre to centre. including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineering-charge.

Supply and fixing in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3. universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Supply and fixed in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheed foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F in repair 150 mm over all length of cover plate of floor door stopper of Brassor Polished Iron body and tongue, anodised with hard drawn steel spring fixed in floor.

M&L for repair to steel window/door/gate including necessary welding, riveting, Easing, drilling, greasing Taking down replacement of unserviceable hinging device, handles, making them in serviceable condition and re-fixing in same opening complete all as specified and directed.

S&F in repair Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

S&F in repairs fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with coach screw and washer in roof, wall etc, all as specified and directed.

Supply and fix in repair 6 mm thick polycarbonate sheeting as in roof covering/cladding to walls, fixed with self tapping screws etc., as in repairs, complete all as specified and directed.

Taking down easing and adjusting aluminium shutters/ partitions including rubber neoprene packing complete of any description n exc 1 sqm each and refixing in same opening, all as specified and as directed Note -Replacement of door closer, glass, lock, handle tower bolt etc shall be measured and paid separately

All as per items 195, here-in-before, but exc 1 sqm and nexc 2 sqm each refixing in same opening

Hacking out old broken glass (any thickness size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones., all as specified and as directed.

M&L for sheet glass 3mm thick figured glass pin head type and glazing with oil putty in square n exec 0.5 Sqm in each pane complete all as specified and as directed.

M&L for sheet glass 4.80mm thick ordinary quality obscured or frosted on one side and glazing with oil putty in square exec 0.5 Sqm in each pane complete all as specified and as directed.

M&L solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed.

M&L 5 mm thick Toughned glass as in hinged doors, partitions, windows, automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified

M&L 12 mm thick Toughned glass as in hinged doors, partitions, windows, automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified

S&F in repairs Pre laminated 9 mm thick particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified.

Supply and fixing in repairs 12 mm thick plywood, grade BWR. type BB. fixed to existing wooden surfaces with nails, complete all as specified and as directed.

Supply and fixing 19mm thick plywood, grade BWR, type BB, fixed to existing wooden surfaces with nails complete all as specified and as directed.

M&L 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified

Supply and fixing Mortice lock vertical type (chrome including handles and connected items) 100mm, 6 levers as in repair complete all as specified and as directed. (Make Godrej Model No-8194 or equivalent model in other approved makes)

Supply and fixing Mortise lock (200 mm Ultra Mortice lock with Universal brass (2H) handle set) as in repair complete all as specified and as directed. Make Godrej Model No-7660 or equivalent model in other approved makes)

S&F steel dead lock, 6 levers as in repair with complete arrangement (handle, lock plate etc.)complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, wooden flooring of any thickness including cover fillets complete all as specified

M&L anodised aluminium snap grid with powder coated frame work for false ceiling of size 605x605 mm including 4 mm dia Gl (upto 1200mm length) hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of Gl flat 40x3 mm size 60 mm long and expansion hold fasteners 12 5mm dia 40 mm long complete all as specified

All as per Ser item No 212 but fixing only.

M&L 4mm non asbestos fibre cement building boards flat, fixed or laid/inserted to timber/Gl/aluminium frame work with screws complete and applying two coats of Oil bound distemper over a coat of primer complete all as specified

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including 6mm dia Gl (upto 1200mm length) hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of Gl flat 40x3 mm size 60 mm long and expansion hold fasteners 12 5mm dia 40 mm long complete all as specified.

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions. All as specified and directed.

M&L for POP ceiling cornice of 4-6 inch width with approved design. All as directed and specified.

M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. All as directed and specified.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelim PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Supply and fixing PVC decorative beading of 5mm thick moulded /designed for PVC wall panelling inclusive of fixing complete all as specified and directed.

M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) for any sunk or raised moulding to flat surface over metal frame work and reinforced with Gl wire mesh with complete arrangements etc all as as specified and directed.

M&L for Dismantling wooden flooring/HDF interlocking floor planks as required. All as specified and directed.

M&L for refixing wooden flooring/HDF interlocking floor planks with beading as required. All as specified and directed.

M&L for 8mm thick moisture resistant high density fiber board (HDF) interlocking floor planks with AC 5 grade highly wear resistant protective layer of aluminium oxide of approved design/pattern, fixed over 2000 micron EPE foam layer over 200 micron polythene sheet, with corner edge bidding complete all as per manufacturer's instruction, all specified and directed

Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling Systern with Dune Bevelled Regular Edge Tiles of 16mm thickness and Armstrong Supratine 15mm face exposed grid. The tiles shall have sand texture visual with acoustical punchers, Humidity Resistance (RH) of 99%, NRC 0.5 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz. 1000 Hz and 2000 Hz) as per ASTM C423 standard. CAC of 33db as per ASTM E1414 Light Reflectance ≥85% as per ASTM E-1477. Thermal Conductivity k = 0.052. 10057 VW/mK Colour Global White. Fire Performance of class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84 with 16mm bevelled Regular edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 40%. The ule shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product SUSPENSION. The tile shall be laid on Armstrong Superfine 38 with 15 mm wide T section flanges colour global white (matching to tile colour) having roll formed double stroke rotary stitching on all T sections ie the Main Runner 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections) The deflection loading of the system shall be 12 5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between "cross tee to cross tee" and "cross tee to main beam" All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg.

The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with OT bending capability All border cross tee/main beam shall be levelled using perimeter fill. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Armstrong suspension system (specifications above) at 1200mm maximum. The First/Last Armstrong suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module Cut cross tees longer than 600mm require independent support 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per Armstrong recommended procedure ARMSTRONG SUSPENSION SYSTEM accessories supplied by Armstrong consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia - 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs (Optionally adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners).

M&L for 4 mm thick water proof and termite proof charcoal wall panel pasted on 5.5 mm thick WPC white board with adhesive screwed to the wall etc. complete all as per manufacturer instructions.

M&L for 12 mm thick seamless waterproof and termite proof WPC lovers wall panels fixed with probond adhesive and screwed to the wall etc., complete all as per manufacturer instruction, all as specified and directed

M&L for preparation of surfaces and pasting of wall paper of any design/pattern/shade complete all as specified and directed.

E/M Portion Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc.complete all as specified and directed.

M & L for point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC casing & capping / PVC contort terminated in PVC block 50 mm deep (sunken) for fixing of switches, sockets, fan regulators etc (PVC box of required size will be measured and paid under relevant item) for the following: -

One light point or one fan point or bell point controlled by one switch or bell push

One 3/5 pin socket outlet, 5 Amp independent

One 3/5 pin socket outlet, 5 Amp on the same board with other switches

M & L for point wiring with FRLSH grade PVC insulated unsheathed multistranded copper conductor cables of 2.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 2.5 sqmm size through and including PVC casing & capping terminated in and including PVC block 50 mm deep (sunken) for fixing of switches/ sockets for one 3 pin socket outlet, 15 Amps, independent .

M & L for concealed point wiring with FRLSH grade PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC conduit terminated in modular switch boards for fixing of switches, sockets, fan regulators etc for the following [Note: - Modular switch boards shall be measured and paid separately]: -

One light point or one fan point controlled by one switch

One 3/5 pin socket outlet, 5 Amp independent

One 3/5 pin socket outlet, 5 Amp on the same board with other switches

M & L for concealed point wiring with FRLSH grade PVC insulated unsheathed multistranded copper conductor cables of 2.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 2.5 sqmm size through and including PVC conduit terminated in modular switch boards for fixing of switches/ sockets for one 3 pin socket outlet, 15 Amps, independent [Note: - Modular switch boards shall be measured and paid separately]

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket outlet 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Blank plate, 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 2 module complete all as specified and directed.

S & F Modular type White cover plate with frame 3 module complete all as specified and directed.

S & F Modular type White cover plate with frame 4 module complete all as specified and directed.

S & F Modular type White cover plate with frame 6 module complete all as specified and directed.

S & F Modular type White cover plate with frame 8 module complete all as specified and directed.

S & F Modular type White cover plate with frame 12 module complete all as specified and directed.

S & F Modular type Metal Flush box 1/2 module complete all as specified and directed.

S & F Modular type Metal Flush box 3 module complete all as specified and directed.

S & F Modular type Metal Flush box 4 module complete all as specified and directed.

S & F Modular type Metal Flush box 6 module complete all as specified and directed.

S & F Modular type Metal Flush box 8 module complete all as specified and directed.

S & F Modular type Metal Flush box 12 module complete all as specified and directed.

S & F Bell , AC, 230 Volts, single pole complete all as specified and directed.

S & F Musical Call Bell as per sample approved and directed by Engineer-in-Charge.

S & F stepped type electronic fan regulator flush type complete all as specified and directed.

S & F Ceiling rose, 3 terminal PVC insulated body complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F in repair LED tube light fitting 10 watt, mirror type /mounted on wall / ceiling connected with insulated unsheathed flexible copper wire of suitable size (length not exceeding 0.5 m) from ceiling rose complete all as specified and directed.

S & F in repair Recess mounting 1X1 LED Luminaire ceiling light fitting 15 W as in repair, with suitable driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make: Havells PLUTO1X1PLR15WLED857S or equivalent make specified in tender.

S & Fin repair LED Ceiling light fitting 35/36 W recess typy as in repair, minimum colour temperature 6500K, with suitable driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make: Crompton LCTLSN-36-CDLor equivalent make specified in tender.

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation.

M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including PVC casing-capping of suitable size, surface type all as directed.

All as per Ser Item No. 262 above but with 2 run of 6.0 Sqmm cable and 6.0 Sqmm as earth continuity conductor.

All as per Ser Item No. 262 above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor.

Cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed

Taking down of Old MCB DB any type any size including MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 4 way with 200 amps rated bus bar complete all as specified and directed.

S & F Sheet metal enclosure for MCB DB double door Triple pole & Neutral 4 way with 200 amps rated bus bar complete all as specified and directed

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 amps rated bus barcomplete all as specified and directed

Supply and fixing PVC casing/capping of size 25 mm with all accessories all as directed by Engr-in- charge .

Supply and fixing PVC casing/capping of size 20 mm with all accessories all as directed by Engr-in- charge .

S&F GI tubing medium grade of size 15 mm dia incl painting and making hole for extension of fan hook in high roof ceiling complete all as specified.

Supply only clamp with buckle for hanging ceiling fan including nut and bolts complete set all as specified and directed.

Supply only MCB Four pole, 415 volts, 63 Amps, breaking capacity 10KA complete set all as specified and directed. Make: Cat No 408702, of: Legrand or equivalent make specified in tender.

Supply only MCB 'C' series single pole and Neural 32 Amps, breaking capacity 10KA,complete all as specified and directed. Make:Cat No 408587-95, make: Legrand or equivalent make specified in tender.

Supply only MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed Make :Cat No 408587-95, make: Legrand or equivalent make specified in tender.

Supply only AC short circuit protection motor starter 25 Amps capacity AC 230 Volt Make :complete set all as specified and directed.

Supply only lamp pendant / batten holder, complete set all as specified and directed.

S & F LED decorative Wall lights fitting 4 W x 2, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable E-14 LED 4w X2 complete all as specified and directed. Make: Jaquar JES-WHT-WL00002TAE14or equivalent make specified in tender.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

UNITED ENGINEERS (BID ID -3390316)

SK CONSTRUCTION SYNDICATE & ENGG CO (BID ID -3390502)

M/S SRINIVASA CONSTRUCTION (BID ID -3390544)

UNIVERSAL TRADING CENTRE (BID ID -3385463)

MAZUMDER ENTERPRISE (BID ID -3391534)

ARJUN DAS VALECHA (BID ID -3388832)

MS HORIZEN (BID ID -3390488)

RAJ ENTERPRISE (BID ID -3391425)