REPAIRS TO FLOORING JOINERY PLASTER PLUMBING AND SANITARY WORKS AT OLD NAVY NAGAR UNDER AGE BR I OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

S & F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) size 400x 400 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick cement screed base in cm (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : (i) The rate includes the cost of cement screed bed

S & F Non Skid rectified ceramic floor tiles 8 to 9 mm thick of size 600x 600 mm as in floors etc approved colour set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick cement screed base in cm (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : (i) The rate includes the cost of cement screed bed

S&F Glazed coloured ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 10mm thick backing layer in CM 1:4.as specified and directed.

Material & labour for glazed ceramic tiles in vertical surface 300x450x7 to 8 mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In-Charge (Note : (i) The rate includes the cost of cement screed bed

Demolition of brick or stone / boulder work, built in cement mortar in portion/ part ordered to be dismantled including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified .

M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete

M & L brickwork (old size) with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4

M&L applying two coats of oil emulsion distemper white or tinted on old wall surface after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified.

M&L applying one coat of oil emulsion distemper white or tinted on old wall surface after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified.

S & F in repairs Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.

Taking down cement or cement lime plaster on brick or stone walls, any description , including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , including preparation of exposed reinforcement surface, cleaning with rotary brush to remove all loose rust and treating with single component solution of rust remover,and apply one coat of rust passivator mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately)

M&L preparation of new undecorated surfaces of walls,soffits & fascias of chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.

M&L rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches all as specified and directed by Engr -in- Charge.

M&L applying two coats of oil emulsion distemper white or tinted on wall over a coat of primer over 1mm thick putty to make surfaces even and smooth of wall after necessary preparation of surface complete all as specified.

Supply only water proofing compound ISI marked.

Hacking out broken glass panes of any description from wooden frames fixed with beads not exceeding 0.5 sqm

S&F sheet glass 4.0 mm thick ordinary quality fixed with Aluminium beads in Sqm n. exc 0.50 Sqm in each panes.

Taking down CI soil/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia all as specified and as directed. ( Inclusive of scaffolding to any height )

S & F CI soil/ waste/ vent pipe s in any length with ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed

S & F CI soil/ waste/ vent pipe s in any length with ears 75 mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed

S & F CI bends or tee( any radius ) for soil / waste pipes 100 mm bore diminishing pieces or tapers on walls complete all as specified.

S & F CI branch pieces single (equal or unequal ) ordinary or inverted (spigot or socket type) with parallel branches for 100mm bore pipe all as specified and directed

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 Sqm each

S &F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as directed.

S & F 30mm thick Flush shutters, solid core construction, with particle board core both face is covered with decorative face veneer with lipping/frame to match all as specified.

Taking down shutters of any description exceeding 1 sqm but n.exc 2 Sqm each and complete all as specified and directed by Engg-In- Charge.

Suppling and fixing 2nd class hardwood 35mm thick skelton shutters, open rebated and prepared to receive wire mesh edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing mesh etc, sizes of members of shutters as specified in SSR complete all as specified and directed by Engg-In- Charge.

Supply and fixing 100mm size MS butt hinges complete all as specified and as directed by Engg-In- Charge.

Supply and fixing 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed by Engg-In- Charge.

Supply and fixing 125mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed by Engg-In- Charge.

Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 300 mm complete all as specified and directed by Engg-In- Charge.

M&L applying two coats of synthetic enamel paint over primer including preparation of wooden surfaces over 10cm width/girth all as specified.

M&L aluminium powder coated curtain rod of 20 mm dia including curtain rings (minimum 6 Nos for each curtain rod) complete

S & F in repairs CP grating of size 100 mm

M & L for one coat of floor paint (Indigo or Equivalent) on old surfaces of chequered tiles/paver blocks in floor including brooming and cleaing the surfaces with water complete all as specified.

Dismantling wrough iron or mild steel work of any description not otherwise provided for embedded in PCC /Brick work all as specified and directed.

Material and labour for stainless steel special alloy grade 304 pipes as in railing including required cutting, notching Argon welding, riding and drilling counter sunk holes and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and polishing complete all as specified & directed by Engineer-in-charge.

S&F toughen glass 12 mm thick as in door shutter inlcuding necessary SS hinges complete all as directed including taking down old u/s glass.

S&F Solar control film 50 micron reflective type with navy ambulum (glareware sun control or equivalent) including taking down old U/S film complete all as directed.

Supply & fix Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop at of primer erected in position as indicated complete push pull or manual type thickness of lath is 1.25mm including taking down old shutters complete all as specified and directed.

Taking down and refixing of steel rolling shutters after carryout necessary repair greasing,top cover, anchoring rod, hasp and staple and erected in position as indicated, complete complete all as specified and directed

M & L for providing and fixing two tyre Gypsum Board false ceiling of 12 thick fxed with screws as per manufacturer's instructions including S &F GI frame work for seamlesss ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entreintermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. GL. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI. flat 40 x3 mm size 60mm long and expansion |hold fasteners12,5mm dia. 40mm long complete all as specified

M&L applying External Texturel painting work as under:-

(a) Providing & applying External Texture Bubble Spray.

(b) Providing and applying two coats of Apex Ultima over a coat of primer complete including complete removal of existing treatment washing all as directed. ( Note : Colour as approved by GE)

M & L 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.(Note: Sample as approved by GE)