Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.8 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST TENDERER. | |
| 2 | L2₹13.2 L+₹24,152 (1.87%)Rejected-AOC MAAN SAROVAR 96 SAI NAGAR GODHANI ROAD NAGPUR 440030 | NAGPUR | NAGPUR | MAHARASHTRA | 440030 | L2 | Rejected-AOC NOT BEING LOWEST TENDERER. | |
| 3 | L3₹14.4 L+₹1.5 L (11.5%)Rejected-AOC | L3 | Rejected-AOC NOT BEING LOWEST TENDERER. |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
14 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAGPUR
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
REPAIR MAINTANANCE TO EXTERNAL WALL, CHAJJA, ROOF, CANTILEVER PROJECTION, PARAPET WALLS, SUNKEN TREATMENT, RAIN WATER SPOUT PIPES AND OTHER MISC REPAIRS AT CERTAIN OMQ AT VAYUSENA NAGAR NAGPUR
2023_MES_574062_2
8581
Open Tender
Civil Works
Item Rate
180 days
GE AF NAGPUR
As per tender documents
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹30,000
30 Mar 2023
23 Feb 2023
20 Mar 2023
23 Feb 2023
14 Mar 2023
1 Mar 2023
Amount
Taking down carefully existing bitumen tar felt including plaster, concrete/brick coba /tiling from the roof and roughening the surface ,wire brushing , cleaning and washing with water etc. , and removing the rubbish to a distance exceeding 1.5km outside the VSN and depositing where all as specified and directed.
Taking down carefully existing bitumen tar felt including plaster and roughening the surface ,wire brushing , cleaning and washing with water etc. , and removing the rubbish to a distance exceeding 1.5km outside the VSN and depositing where all as specified and directed.
Ditto all as per item no. 2 above but on vertical surfaces like parapet except brick coba/tilling etc all as specified and directed.
Material and labour for roof treatment on RCC roof slab complete as mentioned below, all as specified and directed:-
(i) Cleaning the concrete surfaces of RCC roof slab thoroughly with wire brushes, washed and dried. (ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampness all as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment vide item No. 09 hereinafter of pressure grouting shall be operated at the required locations). (iii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (iv) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 kg/sqm on top of dry surface. (v) Laying APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame "torch', application method.
Material and labour for applying bitumen base aluminium paint at 0.2 kg/Sqm in two coats over APP modified polymer for non accessible roof all as specified and directed.
Material and labour for a coat of hot blown bitumen @1.2Kg/sqm shall be applied over polymeric membrane and blinded with clean dry sand at the rate of 0.5 kg/sqm for accessible roof surface all as specified and directed.
Material and labour for screed bed or bedding layer of mortar 20 mm thick in CM 1:4 with WPC for laying floor finishes all as specified and directed.
Material and labour for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed with chemical compound as per manufactures instruction as approved by GE all as specified and directed.
Material and labour for grouting in roof through PVC nipples at a spacing of 45 to 60cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC (model CEBEX100) or PIDILITE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/ voids/ honeycombing areas inside concrete with pressure of 2 to 4 Kg/Sqcm and continued till refusal. After grouting, nozzles to be sealed with the sealing compound/mortar etc, all as per manufacturers instructions all as specified and directed. Note:- After ascertaining the location of leakage/ seepage/dampness under item No.4 here-in-before, this item shall be operated at the required location.
Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate RCC roof slabs to fill undulations to achieve uniform slope complete all as specified and directed.
Material and labour for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even all as specified and directed. Note: WPC shall be measured and paid separately under relvant item.
Supply only integral water proofing compound all as specified and directed.
Demolition of brick masonry, built in cement mortar and removal of debris from site all as specified and directed.
Material and labour for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and as directed.
Material and labour Rendering 15 mm thick in CM 1:3 mixed with water proofing compound @ 3% by weight finished fair and even all as specified on fair faces of brick work or concrete surfaces all as specified and directed. Note: WPC shall be measured and paid separately under relvant item.
Material and labour applying two coats of cement base paint over coat of alkali resistant primer after preparing newly plastered surfaces all as specified and directed.
Material and labour cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.
Disconnecting existing PVC water tanks of capacity exc 250 litres & n. exc 500 litres setting aside (or lowering) for repair work and hoisting , reconnecting, refixng in the same position complete all as specified and as directed.
All as per item No 19 above but PVC water tanks of capacity exc 500 litres & n. exc 1000 litres.
Dismantling existing PVC water tanks of capacity exc 500 litres & n.exc 1000 litres all as directed and removed from site. Note :- Dismantled water tank shall become the contractor's property as per schedule of credit all as specified and directed.
All as per item No 21 above but PVC water tanks of capacity exc 250 litres & n.exc 500 litres.
Supply and fixing 500 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed .
All as per item No 23 above but tank of capacity 1000 litres.
Taking up or down steel tubing and connections 15mm bore all as specified and as directed.
All as per item No 25 above but 20mm bore.
Refixing the steel tubing 15mm bore obtained from item No. 25 above after, cleaning in new or old position (wall, ceiling, floor etc.) complete all as specified and directed.
All as per item No 27 above but 20mm bore.
Supply and fixing GI water tubes 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.
All as per item No 29 above but 20mm bore.
Supply and fixing in repair 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.
All as per item No 31 above but 25mm dia.
Supply and fixing in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) all as specified as directed.
All as per item No 33 above but 25mm dia.
Supply and fixing in repair PVC(SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls icludingtaking down old pipe all as specified and directed.
Supply and fixing in repair PVC (SWR) bend 110mm bore any radius and taking down old bend all as specified and directed.
All as per item No 35 above but PVC (SWR) pipes 75mm bore.
All as per item No 36 above but PVC(SWR) bend 75mm bore.
Material and labour preparation of brick wall surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying two coats of water proofing liquid of make Dr. Fixit Pidicrete URP or equivalent in SIKA/STP on brick surface and as per manufacturer's instruction mix with cement all as specified and directed.
Material and labour for repairs to ends of chajja by removing the old loose concrete material, cleaning the reinforcement and finishing the surface by applying epoxy base resin of make Dr. Fixit Pidicrete or equivalent in choksey/ SIKA and making good with concrete 1:1.5:3 as required to existing broken surface and fair and even in cement mortar 1:3 with epoxy coating and applying two coats of weather proof emulsion paint upto 600mm depth and 100 mm thickness including necessary scaffolding as required at site etc all as specified and directed.
Material and labour for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new surfaces all as specified and directed.
Material and labour for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sq.m including cleaning surfaces all as specified and directed.
Material and labour for applying two coats of acrylic smooth exterior paint of required shade : New work @ 1.67 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm including one coat of paste with rusting material over one coat of putty (if required) including complete removal of existing surface finish with wire brush and washing complete all as specified and directed. Note: (i) Paste of rusting material shall be applied as per manufacturer's instructions all as specified and directed. (ii) Make of acrylic smooth exterior paint shall be make Asian or equivalent in Dulux/Nerolac as approved by Engineer -in-Charge. (iii) 1mm thick wall care cement putty where ever required shall be measured and paid separately.
Material and labour for applying 1mm thick wall care putty on wall surface all as specified and directed.
Material and labour for water proofing treatment on concrete surface for roof/chajjas by applying 1 coat primer of make TikiAquaseal CWP/CWP Plus or equivalent in Sika / STP/ Choksey and then applying 2 coat of chemical of make TikiAquaseal CWP/CWP Plus or equivalent in Sika / STP/ Choksey @0.75 kg/sqm per coat including cleaning of existing surface all specified and directed.
Material and labour for liquid Water proofing PU membrane for roofs of Tiki Aquaseal ARR/PU S/PU AHS,sika or equivalent as per direction of manufacturers including cleaning of existing surface all specified and directed.
Material and labour for dampness rectification on external wall surface :- Surface preparation: Removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammere etc up to brick level. Coating:- Applying two coats of anti-fungal, acrylic waterproofing coating of Dr Fixit Pidifin 2k or equivqalent in CICO/ STP over cleaned surface with brush and allowing it to dry for 24 hrs Finishing the surface: Applying plaster over the treated surface with water proofing compound and applying 1 coat of putty over plaster to provide proper finish after that one coat of acrylic based single component liquid elastomeric water proofing coating of make Dr Fixit or equivqalent in CICO/ STP / Berger HS W/C roof guard with synthetic fibre @ 20% dilution over base coat and 2 coat of premium polyurethene based acrylic emulsion of make Berger platina weather coat long life or equivalent in CICO/ STP as finish coat in desire shade after proper curing all as specified and directed. Note:- The quoted rate shall deemed to be included cost of required scaffolding for painting in any height.
Material and labour for cleaning the existing surfaces with wire brushes ,cut the cracks In V shape and filling with Berger HS crackfill paste or equivalent in CICO/ STP/ SIKA/Choksey and finishing the surface to match with existing finish all as specified and directed.
Material and labour for silicon gel filling with gun to fill gaps between aluminium door frames/similar articles to arrest water coming inside from cills/jams and similar joints in other places complete all as specified and as directed. Note:- make of silicon shall be approved before use by GE/EIC all as specified and directed.
Supply and fixiin repair 100 mm cast iron sanitary connections, short connections pipe of length 300 mm including taking down old one all as specified and directed.
Supply and fixing in repair 100 mm cast iron sanitary connection socket to fit WC out let including taking down old one all as specified and directed.
Supply and fixi in repair 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall including taking down old one all as specified and directed.
All as per item No 52 above but 75 mm bore.
Supply and fix in repair 100 mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, including tking down old one all as specified and directed.
Supply and fixing in repair 100 mm bore CI bend, diminishing pieces or tapers including taking down old one all as specified and directed.
All as per item No 55 above but 75 mm bore.
Material and labour for cement concrete type B1 (1:2:4)(20MM Graded aggregate)in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed.
Material and labour for cleaning the concrete surface for treatment by removing dust, dirt and layers of concrete over the surface etc and identify damaged/honeycomed of the concrete surface and crackfilling shall be done, identifying the cracks, construction joints and treatment of cracks, construction joints, honeycombes ,voids and pack it with M/s Choksey master latex polymer or equivalent in SIKA / STP based cement sand slurry (1:3) aftercutting out cracks in V section . After completion of crackfilling and repairing concrete again ponding shall be done for 3 days to ensure the success of pressure grouting. If there is no leakage/ seepage/ dampness then only further activites shall be started all as specified and directed.
M/s Prakash R. Verma
M/S Darshan Singh Plaha
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .