Loading
Loading…
Loading…
Tender Value
₹1.7 Cr
EMD Value
₹2.4 L
Closing Date
20 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DEN HB
17 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(Placed at Page No.35 of tender form and document attached), along with copies of Audited Balance Sheets and Profit and Loss statement duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
For details refer attached documents
Similar nature of work -Work of replacement of existing sleepers by Steel Channel sleepers/Steel H Beam sleepers in track.
15 conditions · 4 needing a document upload
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents.
The Bank Guarantee bond shall be as per Annexure- VIA (Placed at Page No. 35-36 of tender form), and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i).A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii).The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. .(i.e. excluding the last date of submission of bids) (iii).Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv).The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v).The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected (vi).The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii).The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii).If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer should mandatory submit documentary proof as per the attached checklist document.
Tenderers are abiding by the General Conditions of Contract (GCC) April 2022 & any statutory modification thereof and also abide to carry out the work accordingly.
Documentary proof - Tenderer should submit scanned copy documentary proof in regard for fulfilling the Technical /financial eligibility criteria along-with their offer (for details refer attached documents). If the tenderers do not submit any proof of meeting with the eligibility criteria as laid down in the tender conditions, the offer shall be considered as incomplete and shall be summarily rejected. Documents submitted in support of eligibility criteria after opening of tender will not be considered.
Document attached - Tender form
TNA-VA & CSMT -GMM: Schedule for TBTR (Channel sleeper with H Beam) for 552 Nos under Sr.DEN (HB) Section. (IRPSM ID : 01.02.31.25.3.10.013)
CR-DRMWBB-2025-45-02~CR
CR-DRMWBB-2025-45-02
Open
Works - General
9 Months
Mumbai, Maharashtra
₹0
₹2.4 L
20 Jan 2026
22 Dec 2025
2 Jan 2026
4 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | 522.00 | — | — | ||
| Manufacturing/Fabrication, supplying at work site thehot dip galvanized H-Beam sleeper made of standard rolled section confirming to IS 2062 and as per standard drawing No. RDSO/B-1636/4R and fixing them on the bridge girder with the maximum spacing of 650 mm or as specified by Engineer-in charge including manufacturing, supplying and fixing of elastomeric pads with fitting to HBeam sleeper as specified or directed by engineer at site including manufacturing, supplying and fixing Hot dip galvanized zero toe load fastening and other fitting i.e. Gaurd rail assembly etc to RDSO drawing No. RDSO/B-1636/4R including manufacturing, supplying and fixing of other galvanized item stiffeners, diaphragms and other plates as per RDSO drawing and supplying and fixing of angle-lacing with M. S angle 75x75x8mm including drilling of holes/welding etc. wherever required including connecting the sleeper to squareness as per specifications with all contractor's own material, labour, tools, equipment and all lead and lift transportation complete as per approved drawing and as instructed by engineer -in-charge. The length of H-Beam sleepers will be min. 2.475 mtr and as required by engineer -incharge as per site condition. a)The rate includes supplying and fixing MS Plates required as per site condition and dismantling of existing wooden sleepers track. b) The top flange of the girder shall be thoroughly cleaned before applying a thick coat of ready mix red lead paint confirming to IS 102 in advance before providing the HBeam sleepers with contractor's own labour, paint and equipment. | — | — | — | Rs. | |
| — | 14381.00 | — | — | ||
| Supplying fabrication and fixing MS chequered plates 5.5 mm to 6 mm thick to the top of channel sleeper as per RDSO's Drg No. RDSO/B-1636/1R including cutting to the required size and length and painting one coat of red lead at workshop and two coats of red oxide at bridge site before fixing with all contractor's material, bolts, nuts, labour, tools, plant, machinery, consumable, welding wherever is necessary. Drilling of holes etc. complete including all lead, lift, transportation, loading, unloading and as directed by the Engineer-incharge. | — | — | — | Rs. |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
trackSplcondition.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .