Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹29.9 L+₹1.9 L (6.68%)Rejected-AOC | L2 | Rejected-AOC Not Accepted | |
| 3 | L2₹31.0 L+₹3.0 L (10.7%)Rejected-AOC SHOP NO 4 SUN STAR CHS LTD PLOT NO 309 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-AOC Not Accepted | |
| 4 | L4₹33.0 L+₹5.0 L (17.8%)Rejected-AOC | L4 | Rejected-AOC Not Accepted | |
| 5 | L5₹35.6 L+₹7.5 L (26.9%)Rejected-AOC | L5 | Rejected-AOC Not Accepted |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
20 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH MUMBAI
GE NORTH MUMBAI
CERTAIN REPAIRS TO SECURITY WALL PATH HARD STANDING INTERLOCKING AND OTHER MISC WORK AT INSIDE OUTSIDE KMC DEFENCE CIVILIAN COLONY UNDER GE NORTH MUMBAI
2022_MES_540350_1
8992/E8
Open Tender
Civil Works
Item Rate
180 days
GE NORTH MUMBAI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH MUMBAI
₹80,000
Yes
9 Sept 2022
23 Jul 2022
23 Aug 2022
23 Jul 2022
20 Aug 2022
7 Aug 2022
24 Jul 2022 - 6 Aug 2022
Amount
Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour for walling random rubble, uncoursed, well bonded, bedded and solidly headed built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
All as per item No 2 describe here-in-before but except stone built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc.40mm complete all as specified and as directed by Engineer-in-Charge.
Material and labour for keyed pointing to random or polygonal rubble, uncoursed or brought up to course in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in roof kerbs, rounded or chamfered on edges in lintel upto 1.5m clear span, cills, steps, bands plinth course, string courses, lacing cources, parapet railing upto 60cm in height, copings, apex stones, bed plates, concrete block for hold fast etc including necessary form work complete all as specified and as directed by Engineer-in-Charge.
Material and labour formwork to sides of concrete flates, breaks in floor, opening in concrete walls, PCC/RCC bands in wall, foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and as directed by Engineer-in-Charge.
Material and labour for brick work built in cement mortar 1:6 using sub class 'B' bricks, straight or curved on plan exceeding 6 mtrs mean radius complete all as specified and as directed.
Material and labour for Pre-cast cement concrete block masonry 1:3:6 type C1, (using 20mm graded stone aggregate), with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of the brick or concrete surfaces, finishing the surfaces even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for broken glass coping on top of wall in cement mortar (1:3), 25 thick rendering with rounded or weathered finish and before mortar has set, glass (of bottle or thick glass) broken to approximate 63 mm gauge firmly embedded @ 10 Kg glass per sqm of rendered surface complete as specified in SSR Part-I.
Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates conforming to Fe- 290, Gde 165 etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for MS framed work such as grills , gratings, etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe- 290, Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 1.25mm thick mild plain steel sheet of black colour having tensile strength of 550 MPA with as in steel gates and similar works, cut to size, holes punched, including round headed screw, nailes, rivet and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded joints including bending or turning up, cladding to wall, fixed with self tapping screws including complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / Essar.
supply and fix in repair galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc as directed (each line of wire to be measured), complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repair razor type concertina coil, SG hot galvanised spring tensile wire, 145 to 150 newton per sqmm, zinc coating 250-300 gm per sqm, dia of coil when unstreched 600mm, minimum No of coils 10 per running meter after laying, hot dipped razor ribbon tape of size 0.50 mm thick, 19mm wide before wrapping on central core wire, fixed with 1.66 mm thick GI clips 25 Nos, per RM and special nut bolts for holding 'Z' coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed by Engineer-in-Charge Note :- The length shall be measured along the centre-line of the perimeter of fencing.
Material and labour for mild steel angle iron work for Y shape brackets, with cutting to shape, drilled holes for wire including embedding in concrete and securing etc all as specified and as per directed.
Material and labour for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer with necessary scaffolding / shuttering etc complete all as specified and as directed. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including chequered tiles and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed
Material and labour for 75mm thick plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of flooring / hard standing / path, finished even and fair etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 75mm thick (average thickness) PCC (1:2:4), type B1, using 20mm graded stone aggregate as levelling course, laid in flooring, path, hardstanding, slope as required and finishing even & fair without using extra cement complete all as specified and directed by Engineer-in-Charge.
Material and labour for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for slab thickness of concrete slab 100mm complete all as specified and as directed by Engineer-in-Charge.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour chequered cement concrete tiles of size 20cm x 20cm x 25mm thick with grey cement and no pigments, set, jointed and pointed in neat cement slurry in floors including screed bed of mortar 15mm thick (1:6) complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles / National / Bharat Tiles & tech coy / NITCO / Modern tiles and marbles Bangalore
Material and labour machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and sealing the ends using PCC 1:2:4, type B1 including 25mm sand cushioning complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur
Material and labour for hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface all as specified and as directed.
Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, in hard/dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m and depositing where directed and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge.
Material and labour for providing plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, finishing cement concrete surface even and smooth all as specified and as directed by Engineer-in-Charge.
supply and fix Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required for stiffners etc and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
Supply and fix flat iron for fixing clamps or to support chain link fencing,wind ties and fixed to post ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E- 165, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Hot dipped Galvanized wire chain link fencing of size 100x100mm and dia of GI wire 3mm,fixed to any type of standard flat iron straining bolts etc, binding with wire complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Mild Steel screw bolts(Machine made) with hexagonaal or square heads at one end and screwed at other end, each screw end to be fitted with washer and one hexagoanal or square nut, exceeding 5cm and nexceeding 10cm long, dia of neck 10mm complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 150mm thick Plain Cement Concrete 1:2:4 type B2, using 40mm graded stone aggregate as in flooring for hard standing, finished even and smooth without using extra cement including spike rolling or making impressions of expanded metal whilst concrete is green complete all as specified and as directed by Engineer-in-Charge.
Supply and fix glass dividing strips 3mm thick, 38mm width complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 100mm thick plain cement concrete 1:3:6 type C2, using 40mm graded stone aggregate as in sub base for flooring finished even and fair complete all as specified and as directed by Engineer-in-Charge.
RAJU ENTERPRISES
Parmatma Enterprises
MSK Everlast Enterprises
Chaudhary Enterprises
S.N Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .