Item 1 Construction for Civil Works of Pump House and Underground Water Reservoir with Mechanical Electrical and Instrumentation Works at City Level Park Mansarovar Jaipur

Amount

Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade & PN-6 for potable water as per IS 4984 (amended upto date) in trenches complete with all accessories like Bend, Tee, Reducer, Stub end, End cap etc including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. Note : E/w to be measured and paid separately

75 mm dia

110 mm dia

160 mm dia

Providing, lowering, aligning, fixing in position in pipe line, CI D/F Motorized Sluice Valves with Electric Actuator with integral starter of Class PN 1.0 of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxicsuitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-incharge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

80 mm dia

100 mm dia

250 mm dia

Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) Swing type Non Return Valve of approved make of following Pressure rating & dia complete, generally confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Bonnet & disc of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per IS 5312 (part -1):2004 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non- Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body, cover and disc inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS.Shaft of SS- AISI- 410, Hinge SS AISI 316/410 ,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O" ring seal Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Class PN 1.0

80 mm dia

100 mm dia

SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 13947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR, shunt trip, earth fault trip, push (test) to trip, including making connections with lugs /spreaders etc. as required

With Thermal Magnetic Release

up to 100 Amp , 10 kA, fixed O/L & S/C setting

up to 100 Amp, 16/25 kA, adjustable O/L & fixed S/C setting

Providing, installation, testing and commissioning of UPS, 3Phase 415 V, 50 Hz with 60 min back up Ni+Cd battery bank

Providing, Installation, Testing and Commissioning of ULTRASONIC LEVEL TRANSMITTER for Water Application : Principle : Time of Flight / Sensor MOC PP / Process Connection 1 1/2 inch BSP or 2 inch BSP Threaded type / Power Supply: 24 V DC / Output: 4- 20mA / Display: Integral display for programming and Display Reading / IP 66

Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA with HART / Diaphragm: SS316L / Process Connection: 1/2 "NPT (M) / Accuracy: 0.15% Protection: IP67

Providing, Installation, Testing and Commissioning of CHLORINE ANALYSER for Water Application: Transmitter : Range: 0.05 to 20 ppm, Power Supply 230 VAC, Input: 2 Digital Sensors - one for chlorine and second for pH, Output: 4-20mA HART, IP66/67 Protection / Tx protection cover required / Sensor Range 0-14 pH, able to transmit digital signal to transmitter, calibration data can be transferred to Transmitter, process temp: 65 deg cen/ Sensor range:0.05 to 20 mg/l

Hydropnuematic Variable speed HYPN pressure boosting system consisting of 3 Nos.(2W+1S) Verticle Inline Multistage centrifugal pumps, connected in parallel mounted on a common base frame of galvanised sheet with Suction & discharge manifolds of galvanised M.S. pipe, One No. NRV & two Isolating valves for each pump, pressure guage, pressure Transmitter & manufracturer make factory fitted IP54 panel. The PLC operated panel Inbuilt in VFD shall include all required fuses, motor protection, main switch, 3 No. VFD, Etc. Complete in all respect with 200 Ltr Pressure Tank 10 Bar. Flow Per Pump 24 m3/Hr. at Head 44 mtrs. Motor rating Should be not less than 5.5KW/IP55/IE2.

Hydropnuematic Variable speed HYPN pressure boosting system consisting of 3 Nos.(2W+1S) Verticle Inline Multistage centrifugal pumps, connected in parallel mounted on a common base frame of galvanised sheet with Suction & discharge manifolds of galvanised M.S. pipe, One No. NRV & two Isolating valves for each pump, pressure guage, pressure Transmitter & manufracturer make factory fitted IP54 panel. The PLC operated panel Inbuilt in VFD shall include all required fuses, motor protection, main switch, 3 No. VFD, Etc. Complete in all respect 200 Ltr Pressure Tank 10 Bar. Flow Per Pump 24 m3/Hr. at Head 45 mtrs. Motor rating Should be not less than 5.5KW/IP55/IE2.

Hydropnuematic Variable speed HYPN pressure boosting system consisting of 3 Nos.(2W+1S) Verticle Inline Multistage centrifugal pumps, connected in parallel mounted on a common base frame of galvanised sheet with Suction & discharge manifolds of galvanised M.S. pipe, One No. NRV & two Isolating valves for each pump, pressure guage, pressure Transmitter & manufracturer make factory fitted IP54 panel. The PLC operated panel Inbuilt in VFD shall include all required fuses, motor protection, main switch, 3 No. VFD, Etc. Complete in all respect 100 Ltr Pressure Tank 10 Bar. Flow Per Pump 8 m3/Hr. at Head 45 mtrs. Motor ratingb Should be not less than 2.2 KW/IP55/IE2.

Hydropnuematic Variable speed HYPN pressure boosting system consisting of 3 Nos.(2W+1S) Verticle Inline Multistage centrifugal pumps, connected in parallel mounted on a common base frame of galvanised sheet with Suction & discharge manifolds of galvanised M.S. pipe, One No. NRV & two Isolating valves for each pump, pressure guage, pressure Transmitter & manufracturer make factory fitted IP54 panel. The PLC operated panel Inbuilt in VFD shall include all required fuses, motor protection, main switch, 3 No. VFD, Etc. Complete in all respect 100 Ltr Pressure Tank 10 Bar. Flow Per Pump 8 m3/Hr. at Head 47 mtrs. Motor ratingb Should be not less than 2.2 KW/IP55/IE2.

Hydropnuematic Variable speed HYPN pressure boosting system consisting of 3 Nos.(2W+1S) Verticle Inline Multistage centrifugal pumps, connected in parallel mounted on a common base frame of galvanised sheet with Suction & discharge manifolds of galvanised M.S. pipe, One No. NRV & two Isolating valves for each pump, pressure guage, pressure Transmitter & manufracturer make factory fitted IP54 panel. The PLC operated panel Inbuilt in VFD shall include all required fuses, motor protection, main switch, 3 No. VFD, Etc. Complete in all respect 100 Ltr Pressure Tank 10 Bar. Flow Per Pump 8 m3/Hr. at Head 48 mtrs. Motor ratingb Should be not less than 2.2 KW/IP55/IE2.

Sump Pump for Pump room capacity 8 M3/Hr, Head 15 Mtr., pump model 1500 CW, Type drainage pump (1W+1S), Motor 1.5 KW /IP68 /B class /three phase, with Discharge connecting accessories (Local)

Control panel for sump pump S.N. 6 with alternet cascading with SPP, OLR, DRP, Etc. with float switch.

Filter feed pump (1W+1S) capacity 10 M3/Hr, Head 35 Mtr., Horizontal Multistage pump RPM 2900, Motor 2.2 KW /2900 RPM /IE3/IP55 /Fclass, casing SS 304, Impeller SS 304, Shaft SS 316, Mechnical Seal With isolation valve, pressure guage, Pressure switch, MS base frame with MS suction discharge header etc.

Control panel for Filter Feed Pump S.N. 8 with alternet cascading with SPP, OLR, DRP, Etc. with float switch.

Multigrade Sand Filter (1W), of water filtration plant Dual Media filter made of FRP composite material complete in all respects, ready for operation of capacity 5 Cu.M per hpour complete with dished ends, supporting legs and facing pad for pipe connection complete with manhole cover, frontal pipe work of min. 10 Kg./Sqcm. Pressure fitted with valves and proper supports. (Rates of flow not to be exceeds 18 Cu.M/Hr/Sq.M of surface area). Make ION Exchange (I) Ltd.

Water Softner made of MS/FRP coposite Material Ready for operaion of capacity % Cu.M per hour complete with disehed ends, supporting legs and facing pad for pipe connection, frontal pipe work of min. 10 Kg/Sq.cm. Pressure 5.0Kg/cm2, min working pressure 1.8Kg./cm2, Resin quality INDION 220Na, Resin Quantity INDION 400. Design hardness PPM 250-300, Product hardness PPM<10, OBR M3 50, Make ION Exchange (I) Ltd.

Construction of RR stone masonry sluice valve chambers of following size wall thickness 45CM bed concrete M-15 grade 15 CM, 25 CM thick internal & outer planter ferrow cement cover "AA" class loading. Internal size 1.20 x 1.50 Mtr.

Providing, lowering, aligning and fixing in position DI D/F Diaphragm type Pressure Reducing / Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body & Bonnet - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or ASTM A 536, Diaphragm and Resilient seal disc - Flexible, nonwicking nylon fabric reinforced synthetic elastomer -Buna-N / EPDM (FDA / WRAS approved), Body Seat Ring - Cast stainless steel ASTM- A 351 GR. CF8M / AISI- 316, raised, replaceable inline & onsite Stem - Stainless Steel, AISI-316, raised, replaceable inline & onsite Spring & Bearing bush- Stainless Steel, AISI-316 ,Disc guide, disc retainer & diaphragm washer - Stainless Steel, AISI-304/ 316/Bronze ,Seal- EPDM/ NBR ,Pilot Body- Stainless Steel, AISI-304/ CF8 or Brass Tubing - Stainless Steel, AISI-304 / Copper ,Solenoid Valve- Stainless Steel, AISI- 316 ,Throttling plug - Stainless Steel, AISI-304, Nut- Bolts - SS . Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. Insersion rubber of black EPDM 6mm thick Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Pilot operated SCADA Compatible Diaphragm Type Pressure Reducing Valves (Class PN 1.6)

80 mm diameter

100 mm diameter

Diaphragm Type Flow Control Valve With Electrical Actuator suitable for scada (PN 1.6 )

80 mm diameter

100 mm diameter

Construction of RCC Clear Water Reservoirs of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab, top roof slab and food grade epoxy paint to inner face of the container and slab, including refilling and disposing of surplus stuff , all labour and material charges, providing and fixing accessories such as M.S./Alluminium ladder/RCC Stairs inside and outside, manhole frame and cover, puddle collar, ventilators, satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints on all exposed surface of structure etc. complete in all respect as per design data, criteria, obligatory requirements and detailed specifications, scope of work and GA drawing. The job include painting the name of the scheme and other details on the reservoir and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.NotesThe rate indicated below are excluding the cost of pipes, specials and valve required for inlet, outlet, washout, overflow piping arrangement, but inclusive of DI puddle collar for inlet, outlet, overflow and washout pipe of appropriate sizes to be embedded in concrete.Below mentioned rates are for raft foundations with soil bearing capacity (SBC) of 10 MT/sqm and applicable for SBC more than or equal to 10MT/sqm and less than 18MT/sqm. These rates shall be increased or decreased for variation in SBC as below:For foundation on SBC 7 MT/sqm applicable for SBC more than or equal to 7 MT/sqm and less than 10 MT/sqm, add 5%,For foundation on SBC more than 5 MT/sqm and up to 7 MT/sqm, add 7.5%.,For foundation on SBC more than 18MT/sqm rates decreased by 5 %

Following rates are for seismic zone II. For zone III, these rates shall be increased by 4% and for zone IV, these rates shall be increased by 9%. Concerned Executive Engineer shall confirm the seismic zone for the scheme from seismic zones plan before estimation and adopt appropriate rates as per actual seismic zones.Rates for RCC Rectangular Flat Slab CWR, SBC 10T/sqm, seismic zone II .

150 KL capacity, water tanks of various size

Construction of Pump house of required size suitable for installation of maximum 4 no. monoblock pump sets as per approved GA drawing, scope of work and technical specification complete work in all respect.

Raw water Pump House (PH-5) (45 Sqm)

Ras water Pump House (PH-7) (45 Sqm)

Providing, lowering, laying in trenches, aligning, fixing in position and jointing socketed rubber gasket type ISI marked uPVC pipes of Class III (6 Kg/sqcm) suitable for potable water (as per IS 4985-2000) of following outer dia with all accessories (including specials and fitting in 10Kg/Sqcm) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer.

40 mm dia

50 mm dia

Providing of PGP Ultra Pop-up ROTOR sprinkler 4.9-14 mtr. radius rotor with atuomatic arc return and non strippable drive part and ful circle in one model, flow 1.2 to 53.8 lpm with CV -etc. item complete.

Providing of SI-712, 3/4" Pop up Connecting four Elbow swing joint Assembly. The fittings shall be made of UV resistant thermo plastic etc. item complete.

MP rotator having radious (1.2M - 10.7M) colour coded with automatic arec return and non strippable drive part and full circle in one model, flow 1.2 to 53.8 lpm - with CV etc. item complete and complete Body 4"

Providing of SI-512, 1/2" Pop up connecting Four Elbow Swing joint Assembly, the fitting shall be made of UV resistant thermo plastic

Providing of PP Service Saddle of vaying size HSN code : 39172390

Providing of PVC Ball valve, security pivot to maintain lever in space, double water tight joint, direct injection stem non mechanical, with a base which permits maximum penmits maximum penetration into the valve of size 110 mm

Providing of PVC Ball valve, security pivot to maintain lever in space, double water tight joint, direct injection stem non mechanical, with a base which permits maximum penmits maximum penetration into the valve of size 75 mm

Providing of PVC Ball valve, security pivot to maintain lever in space, double water tight joint, direct injection stem non mechanical, with a base which permits maximum penmits maximum penetration into the valve of size 50 mm

Providing of 12" Rectangular valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout.

Providing of 6" round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout

Providing of 4" Automatic screen filter with capacity matching pump design flow having suitable inlet connectiions, to create a helical effect in the incoming water, spinning particulate in suspension away from the filtering element and so minimuzing cleanings ffrequency, 3/4" outlet for flushing at bottom of filter & miximum working presure of 10 Bars, with pressure gauge (30 M3)

Providing & fixing of ventury for fertigation : Gravity feed type NC valve

Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at syncronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD. 7.5 KW (10 HP)

Providing and fixing of outdoor control panel suitable for pumpset having panel box and fixed alongwith following accessories starter, start / stop push buttons, Indicating lamps, MCB with IP-65 Rating

Providing of GI Suction, Delivery & Header pipe “B" class as per IS:1239 or amended up to date threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect.

Providing, lowering, aligning and fixing in position Pressure Release valve 3" Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge.

Operation and maintenance for raw water and reclamed pump house, pumping machinery with Mechanical, Electrical & Instrumentation Works pump house no. 1 to 5 & 7 complete all respect as per scope of work.

Bidder Name

Amount

M/S DIVIJA CONSTRUCTION(GSTN-08AAFFD6567N1ZT)

sharvan singh construction co(GSTN-08AFEPB1571J1ZN)

sharvan singh construction co

M/S DIVIJA CONSTRUCTION