CONSTRUCTION OF SHRAMIK RESIDENTIAL SCHOOL (FROM 6TH STD TO 12TH STD) AT Udakeri Village, Bailahongala Taluk, Belagavi District

CONSTRUCTION OF SHRAMIK RESIDENTIAL SCHOOL (FROM 6TH STD TO 12TH STD) AT Udakeri Village, Bailahongala Taluk, Belagavi District

code01 ACADEMIC BLOCK - GROUND FLOOR - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, st... 762.63 Cum

code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 326.84 Cum

code03 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) 346.84 Cum

code04 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to... 1271.60 Sqm

code05 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r... 762.63 Cum

code06 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ... 1013.51 Cum

code07 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes... 227.53 Cum

code08 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 310.72 Cum

code09 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 20.09 Cum

code10 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 109.50 Cum

code11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 20.92 Cum

code12 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 42.00 Tonne

code13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 82.94 Cum

code14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 87.23 Cum

code15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 166.47 Cum

code16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 20.97 Cum

code17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 11.46 Cum

code18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 15.09 Cum

code19 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 58.23 Tonne

code20 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 1502.29 Sqm

code21 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 265.07 Sqm

code22 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo... 52.80 Sqm

code23 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c... 1.50 Cum

code24 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani... 18.00 No

code25 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Handles 300mm 36.00 No

code26 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm 18.00 No

code27 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 36.00 No

code28 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm 72.00 No

code29 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm 18.00 No

code30 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 18.00 No

code31 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ... 108.00 No

code32 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. 108.40 m

code33 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di... 126.72 Sqm

code34 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e... 126.72 Sqm

code35 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 93.60 Sqm

code36 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr... 52.38 Sqm

code37 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 3065.58 Kg

code38 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 145.98 Sqm

code39 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 145.98 Sqm

code40 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi... 182.40 m

code41 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 50.40 Sqm

code42 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u... 18.00 No

code43 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 2131.32 Sqm

code44 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 3887.77 Sqm

code45 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 1142.70 Sqm

code46 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific... 1266.30 m

code47 Providing and fixing suitable Plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ... 970.30 m

code48 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm... 550.08 Sqm

code49 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d... 572.44 Sqm

code50 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c... 62.32 Sqm

code51 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 24.00 Sqm

code52 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.... 990.00 Kg

code53 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 3887.77 Sqm

code54 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 1142.70 Sqm

code55 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm... 36.64 Sqm

code56 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi... 537.60 Sqm

code57 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c... 215.10 Sqm

code58 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,... 131.10 Sqm

code59 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 537.60 Sqm

code60 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur... 39.33 Cum

code61 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 13.11 Cum

code62 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 29.78 Cum

code63 FIRST FLOOR - ACADEMIC BLOCK. Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto ... 76.46 Cum

code64 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 78.89 Cum

code65 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 157.92 Cum

code66 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 19.39 Cum

code67 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 11.04 Cum

code68 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 22.81 Cum

code69 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 53.22 Tonne

code70 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 1388.72 Sqm

code71 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 278.46 Sqm

code72 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo... 48.00 Sqm

code73 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c... 1.32 Cum

code74 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani... 17.00 No

code75 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Handles 300mm 34.00 No

code76 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm 17.00 No

code77 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 34.00 No

code78 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm 68.00 No

code79 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm 17.00 No

code80 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 17.00 No

code81 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ... 102.00 No

code82 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. 101.60 m

code83 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di... 115.20 Sqm

code84 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e... 115.20 Sqm

code85 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 104.40 Sqm

code86 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr... 54.00 Sqm

code87 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 3326.40 Kg

code88 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 158.40 Sqm

code89 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 158.40 Sqm

code90 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi... 148.20 m

code91 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 40.95 Sqm

code92 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u... 17.00 No

code93 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 2164.65 Sqm

code94 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 3817.15 Sqm

code95 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 1136.04 Sqm

code96 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific... 1227.30 m

code97 Providing and fixing suitable Plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ... 931.30 m

code98 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm... 627.64 Sqm

code99 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d... 250.39 Sqm

code100 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c... 62.32 Sqm

code101 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 30.00 Sqm

code102 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.... 468.00 Kg

code103 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 3817.15 Sqm

code104 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 1136.04 Sqm

code105 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi... 446.04 Sqm

code106 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c... 179.41 Sqm

code107 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,... 109.84 Sqm

code108 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 446.04 Sqm

code109 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur... 32.95 Cum

code110 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 10.98 Cum

code111 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 83.52 Sqm

code112 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. 139.20 m

code113 TERRACE FLOOR - ACADEMIC BLOCK. Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upt... 6.80 Cum

code114 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 21.24 Cum

code115 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 3.06 Cum

code116 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 10.09 Cum

code117 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 1.62 Cum

code118 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 30.81 Cum

code119 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 9.60 Kg

code120 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 415.99 Sqm

code121 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi... 1.89 Sqm

code122 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 5.40 Sqm

code123 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 113.40 Kg

code124 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 237.69 Sqm

code125 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 138.15 Sqm

code126 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 730.15 Sqm

code127 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 237.69 Sqm

code128 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 730.15 Sqm

code129 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 7.29 Sqm

code130 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 7.29 Sqm

code131 Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, in... 1260.80 Sqm

code132 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 58.60 Cum

code133 GROUND FLOOR-Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings wit... 31.00 Per Mtr

code134 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP... 11.00 Per Mtr

code135 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 89.00 Per Mtr

code136 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 121.00 Per Mtr

code137 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete (All traps ) 21.00 No

code138 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 (for drinking water point, Wash Basin and Ewc) 29.00 No

code139 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g (for Iwc ) 33.00 No

code140 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and c... 2.00 No

code141 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ... 9.00 No

code142 Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,... 24.00 No

code143 Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with st... 4.00 No

code144 Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with st... 2.00 No

code145 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 15.00 No

code146 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 5.00 No

code147 Providing and fixing Stainless Steel Grab Bar 600 mm Long with all

concealed fitting arrangements & all necessary accesories complete - Class (Handicap Toilet) 4.00 No

code148 Providing and fixing PTMT extension nipple for water tank pipe, fittings

of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g 18.00 No

code149 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 72.00 Per Mtr

code150 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 23.00 Per Mtr

code151 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 22.00 Per Mtr

code152 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 9.00 Per Mtr

code153 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 11.00 Per Mtr

code154 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 17.00 Per Mtr

code155 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 6.00 Per Mtr

code156 FIRST FLOOR-Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with... 27.00 Per Mtr

code157 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP... 11.00 Per Mtr

code158 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 86.00 Per Mtr

code159 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 93.00 Per Mtr

code160 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 19.00 Per Mtr

code161 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 19.00 Per Mtr

code162 Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp... 2.00 Per Mtr

code163 C.I. grating 180X180 mm 5.00 No

code164 Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes of 150mm dia conforming to IS : 13592 Type A, including jointing

with seal ring conforming to IS : 5382, leaving 10 mm gap ... 43.00 Per Mtr

code165 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete (All traps ) 17.00 No

code166 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 (for drinking water point, Wash Basin , Ewc and lab sink) 23.00 No

code167 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g (for Iwc) 26.00 No

code168 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ... 2.00 No

code169 Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,... 24.00 No

code170 Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with st... 4.00 No

code171 Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with st... 2.00 No

code172 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 15.00 No

code173 Providing and fixing white vitreous china laboratory sink with C.I. brackets,

C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P.

brass trap with necessary C.P. brass unions compl... 4.00 No

code174 Providing and fixing Exposed set for single concealed stop cock with basin

spout made of Stainless steel with all concealed fitting arrangements &

all necessary accesories complete - Class Economy ... 4.00 No

code175 Providing and fixing PTMT extension nipple for water tank pipe, fittings

of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g 15.00 No

code176 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 98.00 Per Mtr

code177 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 31.00 Per Mtr

code178 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 18.00 Per Mtr

code179 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pip... 7.00 Per Mtr

code180 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pip... 9.00 Per Mtr

code181 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pip... 69.00 Per Mtr

code182 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pip... 9.00 Per Mtr

code183 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pip... 17.00 Per Mtr

code184 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pip... 12.00 Per Mtr

code185 Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 65 mm nominal bore 3.00 No

code186 Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 80 mm nominal bore 1.00 No

code187 Providing and fixing Wafer type single flange Butterfly valve conforming

to relevant IS 13099/9991 EN GGG40/50 with latest amendments as

detailed below of the following diameter and types with TP ... 2.00 No

code188 Providing and fixing Wafer type single flange Butterfly valve conforming

to relevant IS 13099/9991 EN GGG40/50 with latest amendments as

detailed below of the following diameter and types with TP ... 1.00 No

code189 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an... 5000.00 l

code190 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv... 180.00 Kg

code191 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 80.00 m

code192 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 275.00 m

code193 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 50.00 m

code194 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 1950.00 m

code195 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 2350.00 m

code196 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 350.00 m

code197 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 50.00 m

code198 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 550.00 m

code199 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 880.00 m

code200 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 40.00 m

code201 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 10.00 m

code202 Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/lconduit entry as required with one coat of primer of approved make etc. 200x200x65 mm 20.00 Each

code203 Supplying and fixing PVC/Metal conduit Deep Junction box.19/20mm deep Junction box 250.00 Each

code204 Supplying and fixing PVC/Metal conduit Deep Junction box.25mm deep Junction box 50.00 Each

code205 Supplying and fixing PVC/Metal conduit Deep Junction box.32mm deep Junction box 30.00 Each

code206 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit in brick wall 50.00 m

code207 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit CC floor 50.00 m

code208 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.25mm 100.00 m

code209 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.32mm 50.00 m

code210 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.38mm 50.00 m

code211 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.50mm 50.00 m

code212 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 50.00 m

code213 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 100.00 m

code214 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 50.00 m

code215 Supplying and fixing S hook made out of 14mm dia MS Rod 10.00 No

code216 Supplying and fixing of Metal Fan box with Round Hook. 98.00 No

code217 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 45.00 Point

code218 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 34.00 Point

code219 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 257.00 Point

code220 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 82.00 Point

code221 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 3.00 Point

code222 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 500.00 m

code223 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 2240.00 m

code224 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 4365.00 m

code225 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 4970.00 m

code226 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 1200.00 m

code227 Supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor conforming to IS 8130-1984 and (Virgin) PVC Insulation sheathed suitable for work... 250.00 m

code228 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N... 10.00 Each

code229 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N... 5.00 Each

code230 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.3... 77.00 Each

code231 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.4... 4.00 Each

code232 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.6... 9.00 Each

code233 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.8... 73.00 Each

code234 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1... 21.00 Each

code235 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1... 3.00 Each

code236 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1... 19.00 Each

code237 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 77.00 Each

code238 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 4.00 Each

code239 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 9.00 Each

code240 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 83.00 Each

code241 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 26.00 Each

code242 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 3.00 Each

code243 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 19.00 Each

code244 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch 629.00 Each

code245 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps Two way Switch 16.00 Each

code246 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps 3way socket 275.00 Each

code247 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module. 98.00 Each

code248 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps one way switch 91.00 Each

code249 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Bell Push 5.00 Each

code250 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32Amps DP switch 5.00 Each

code251 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socket 40.00 Each

code252 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293..TV 4.00 Each

code253 Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box. 1.00 Each

code254 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. 3500.00 Sq CM

code255 Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. 3500.00 Sq CM

code256 Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab. 750.00 Each

code257 Supplying ......way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws.6 to 10 Way Gang Box 10.00 Each

code258 Supplying and fixing of metal clad industrial plugs and sockets 2 Pole + earth 250V PLUG.3 Pole + earth 440V PLUG .32A 2.00 Each

code259 Supplying and fixing of metal clad industrial plugs and sockets 2 Pole + earth 250V PLUG.3pole+earth 440V SOCKET.32A 2.00 Each

code260 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..6A Bakelite Ceiling Rose. 100.00 No

code261 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..6A Pendant Holder 20.00 No

code262 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..6A Batten Holder 328.00 No

code263 Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB).The entire plug and socket shall be mounted in a thermoplastic I powder coa... 1.00 Each

code264 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 1.00 Each

code265 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 85.00 Each

code266 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 2.00 Each

code267 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 13.00 Each

code268 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 6.00 Each

code269 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.II - Double Door. 16 way SP&N 3.00 Each

code270 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.II - Double Door. 4 Way TP & N 7.00 Each

code271 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.II - Double Door.6 Way TP & N 1.00 Each

code272 Supplying,fixing and wiring residual current circuit breaker (RCCB) 240v/450v upto 300mA sensitivity on exisitng wood panel board.16A-25A 2 pole 25.00 Each

code273 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397510 Sqmm, ... 0.10 Km

code274 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397595 Sqmm, ... 0.18 Km

code275 Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No. 1.17.1) 18.00 cm

code276 Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10) 18.00 cm

code277 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff2.5 sqmm to 25 sqmm 0.10 Km

code278 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff35 sqmm to 95 sqmm 0.18 Km

code279 Supplying and fiixing of Brass Cable Gland.25mm dia 10.00 Each

code280 Supplying and fiixing of Brass Cable Gland.32mm dia 2.00 Each

code281 Supplying and fiixing of Brass Cable Gland.40 mm dia 2.00 Each

code282 GI Pipe, 100 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177) 10.00 m

code283 Laying of GI Pipe 10.00 m

code284 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.10 sqmm 16.00 Each

code285 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.95 Sqmm Copper Terminal, Apprx Wt: 58 Gm 8.00 Each

code286 Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required .150x50mm 20.00 m

code287 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul... 6.00 No

code288 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.8 SWG-GI Wire 250.00 m

code289 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 8 SWG-Cu Wire 100.00 m

code290 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm GI strip 40.00 m

code291 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm Copper strip 20.00 m

code292 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate 2.00 Each

code293 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz ... 19.00 Each

code294 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz ... 316.00 Each

code295 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has... 9.00 Each

code296 Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB w... 12.00 Each

code297 Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB w... 8.00 Each

code298 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. 20.00 Each

code299 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep (450 mm) 10.00 Each

code300 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu... 98.00 Each

code301 Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply. 300mm Sweep 1.00 Each

code302 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire... 364.00 Each

code303 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar... 99.00 Each

code304 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w... 30.00 Each

code305 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. 5.00 Each

code306 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc... 10.00 No

code307 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. 10.00 Each

code308 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M... 10.00 Each

code309 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,... 65000.00 Sq CM

code310 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i... 6.00 m

code311 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 6.00 m

code312 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 6.00 m

code313 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code314 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT 1.00 Each

code315 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le... 1.00 Each

code316 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo... 1.00 Each

code317 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C 3.00 Each

code318 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 3.00 Each

code319 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 3.00 Each

code320 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 2.00 Each

code321 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 1.00 Each

code322 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 8.00 Each

code323 Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standard... 1.00 Each

code324 GROUND FLOOR-Supplying Installing, testing and commissioning of 19mm dia 40.0m

length hose with rubber lining smooth bore, reinforced of natural/synthetic

fibres, a rubber cover finishshall besmooth... 2.00 No

code325 Supply, installation of 4kg Fire Extinguisher Mono Ammonium

PhosphatePowder 50, StoredPressure Type, Pressure Gauge, Gross

Weight 6.9Kg, emptyweight 2.9Kg, Can Height 440MM, Diameter

140MM, Dischar... 4.00 No

code326 Supply and installation of 2Kg C02 Gas Type Fire Extinugisher Squeeze

grip type, used Unused Mechanism, Squeeze Grip,Gross Weight 9.1Kg.

empty Weight 7.1Kg. Can Height 595 MM Diameter 108MM,Discharg... 4.00 No

code327 Supply and installationof 4.5Kg C02 Gas Type aluminium body

Squeeze grip Fire Extinugisher, TrolleyMounted, Easy Weight Management,

Used UnusedMechanism, Squeeze Grip, Gross Weight 11.16Kg.

empty W... 2.00 No

code328 Providing and Fixing Fire force boardsize of 3'x2 'madeout to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials, labour,usage charge... 2.00 Per Mtr

code329 FIRST FLOOR-Supply, installation, testingand commissioning electrically driven Terrance

pump of capacity 450.0 Lpm at 35.0m Head bronze impeller pump coupled to

electrical driven moto rwith suitabl ... 1.00 No

code330 Supplying, installing, testing & commissioning approved make heavyduty

(Class 'C') GIpipes and fittings confirming to IS1239 PI&II,Malleable

Specialssuchastees, longradiusbends,checknuts,unions, fla... 68.00 Per Mtr

code331 Supplying ,installing, testing and commissioning of PN16CI butterfly valves

of confirming to IS13039 with necessary nuts & bolts etc .,complete----etc.,

complete as per specificaiton with all lead a... 2.00 No

code332 Supplying installing, testingandcommissioningof PN16CI "NonReturn

Valve"confirmingtoIS13039withnecessaryboltsandnutsetccomplete

includes cost of allmaterials labour chargeswithall lead lift loadinga... 1.00 No

code333 supply and installing testing and commissioning of CI " Y " stainer

confirming toISstandardwithnecessaryboltsandnutscomplete includes

costofallmaterials labourchargeswithall leadlift loadingandunloa... 1.00 No

code334 Supplying Installing, testing and commissioning of Gun metal AIR

RELEASE VALVE SIZE OF 25mm dia in cluding costo fmaterials, labour,

usage charges of machinery complete as per specifications. Comp... 2.00 No

code335 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an... 10000.00 l

code336 Supplying Installing, testing and commissioning of 19mm dia 40.0m

length hose with rubber lining smooth bore, reinforced of natural/synthetic

fibres, a rubber cover finishshall besmooth, flutedor fa... 2.00 No

code337 Supply, installation of 4kg Fire Extinguisher Mono Ammonium

PhosphatePowder 50, StoredPressure Type, Pressure Gauge, Gross

Weight 6.9Kg, emptyweight 2.9Kg, Can Height 440MM, Diameter

140MM, Dischar... 7.00 No

code338 Supplyandinstallationof2KgC02 Gas Type Fire Extinugisher Squeeze

grip type, usedUnusedMechanism, SqueezeGrip,GrossWeight 9.1Kg.

emptyWeight 7.1Kg. CanHeight 595MMDiameter 108MM,Discharge

Time less ... 2.00 No

code339 Providing and Fixing Fire force boardsize of 3'x2 'madeout to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials, labour,usage charge... 2.00 Per Mtr

code340 BOYS HOSTEL - GROUND FLOOR - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru... 763.90 Cum

code341 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 327.39 Cum

code342 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) 347.39 Cum

code343 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to... 1003.11 Sqm

code344 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r... 763.90 Cum

code345 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ... 782.68 Cum

code346 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes... 208.01 Cum

code347 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 268.87 Cum

code348 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 16.70 Cum

code349 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 114.58 Cum

code350 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 17.49 Cum

code351 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 38.13 Tonne

code352 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 56.05 Cum

code353 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 90.59 Cum

code354 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 145.30 Cum

code355 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 20.87 Cum

code356 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 8.26 Cum

code357 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 20.50 Cum

code358 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 43.48 Tonne

code359 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 1410.03 Sqm

code360 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 310.58 Sqm

code361 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo... 47.04 Sqm

code362 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c... 1.16 Cum

code363 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani... 20.00 No

code364 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Handles 300mm 40.00 No

code365 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm 20.00 No

code366 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 40.00 No

code367 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm 80.00 No

code368 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm 20.00 No

code369 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 20.00 No

code370 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ... 120.00 No

code371 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. 106.40 m

code372 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di... 112.90 Sqm

code373 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e... 112.90 Sqm

code374 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 137.70 Sqm

code375 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr... 16.56 Sqm

code376 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 3239.46 Kg

code377 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 154.26 Sqm

code378 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 154.26 Sqm

code379 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi... 171.00 m

code380 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 47.25 Sqm

code381 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u... 20.00 No

code382 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 1853.13 Sqm

code383 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 3466.40 Sqm

code384 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 1281.81 Sqm

code385 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific... 1130.70 m

code386 Providing and fixing suitable Plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ... 774.70 m

code387 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm... 464.98 Sqm

code388 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d... 315.21 Sqm

code389 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c... 41.85 Sqm

code390 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 24.00 Sqm

code391 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.... 432.00 Kg

code392 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 3466.40 Sqm

code393 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 1281.81 Sqm

code394 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm... 58.02 Sqm

code395 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi... 517.86 Sqm

code396 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c... 221.27 Sqm

code397 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,... 140.54 Sqm

code398 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 517.86 Sqm

code399 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur... 42.16 Cum

code400 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 14.05 Cum

code401 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 10.25 Cum

code402 Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination (preferably white) on factory pressed BWP gr... 416.67 Sqm

code403 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in- charge. 150mm length 172.00 No

code404 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75mm 172.00 No

code405 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 172.00 No

code406 Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with screws etc. com... 516.00 No

code407 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 172.00 No

code408 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality forcupboard /wardrobe/kitchen shutters including necessary synthetic resin hot pressed to edges on binding mach... 879.35 m

code409 Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work 265.43 Sqm

code410 Providing and supplying 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. for use ... 129.15 Sqm

code411 FIRST FLOOR - BOYS HOSTEL Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50... 56.05 Cum

code412 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 86.14 Cum

code413 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 131.52 Cum

code414 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 21.61 Cum

code415 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 7.52 Cum

code416 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 21.99 Cum

code417 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 41.79 Tonne

code418 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 1475.58 Sqm

code419 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 302.36 Sqm

code420 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo... 39.90 Sqm

code421 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c... 0.93 Cum

code422 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani... 18.00 No

code423 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Handles 300mm 36.00 No

code424 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm 18.00 No

code425 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 36.00 No

code426 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm 72.00 No

code427 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm 18.00 No

code428 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 18.00 No

code429 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ... 108.00 No

code430 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. 94.60 m

code431 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di... 95.76 Sqm

code432 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e... 95.76 Sqm

code433 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 156.60 Sqm

code434 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr... 15.48 Sqm

code435 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 3613.68 Kg

code436 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 172.08 Sqm

code437 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 172.08 Sqm

code438 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi... 159.60 m

code439 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 44.10 Sqm

code440 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u... 18.00 No

code441 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 1749.00 Sqm

code442 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 3302.32 Sqm

code443 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 1262.73 Sqm

code444 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific... 1130.70 m

code445 Providing and fixing suitable Plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ... 774.70 m

code446 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm... 517.33 Sqm

code447 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d... 222.59 Sqm

code448 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c... 41.85 Sqm

code449 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 24.00 Sqm

code450 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.... 432.00 Kg

code451 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 3302.32 Sqm

code452 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 1262.73 Sqm

code453 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi... 488.46 Sqm

code454 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c... 208.73 Sqm

code455 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,... 132.65 Sqm

code456 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 488.46 Sqm

code457 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur... 39.80 Cum

code458 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 13.27 Cum

code459 Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination (preferably white) on factory pressed BWP gr... 465.12 Sqm

code460 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in- charge. 150mm length 192.00 No

code461 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75mm 192.00 No

code462 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 192.00 No

code463 Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with screws etc. com... 576.00 No

code464 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 192.00 No

code465 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality forcupboard /wardrobe/kitchen shutters including necessary synthetic resin hot pressed to edges on binding mach... 981.60 m

code466 Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work 298.80 Sqm

code467 Providing and supplying 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. for use ... 151.20 Sqm

code468 TERRACE FLOOR - BOYS HOSTEL. Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3... 4.54 Cum

code469 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 14.13 Cum

code470 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 5.52 Cum

code471 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 7.06 Cum

code472 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 1.72 Cum

code473 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 45.05 Cum

code474 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 9.04 Kg

code475 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 564.43 Sqm

code476 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi... 3.78 Sqm

code477 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 5.40 Sqm

code478 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 113.40 Kg

code479 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 173.10 Sqm

code480 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 136.26 Sqm

code481 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 1012.26 Sqm

code482 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 173.10 Sqm

code483 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 1012.26 Sqm

code484 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 9.18 Sqm

code485 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 9.18 Sqm

code486 Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, in... 1080.40 Sqm

code487 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 47.45 Cum

code488 GROUND FLOOR-Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings wit... 20.00 Per Mtr

code489 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP... 7.00 Per Mtr

code490 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 125.00 Per Mtr

code491 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 60.00 Per Mtr

code492 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete (All traps ) 28.00 No

code493 Providing and fixing 600x450 mm beveled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board ground fixed

to wooden cleats with C.P. brass screws and washers complet... 17.00 No

code494 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 (for drinking water point, Wash Basin and Ewc ) 22.00 No

code495 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g (for Iwc , bath, wardenroom, seek room and washing ) 30.00 No

code496 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with t... 14.00 No

code497 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and c... 1.00 No

code498 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ... 4.00 No

code499 Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,... 10.00 No

code500 Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with st... 2.00 No

code501 Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with st... 4.00 No

code502 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 14.00 No

code503 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 3.00 No

code504 Providing and fixing Stainless Steel Grab Bar 600 mm Long with all

concealed fitting arrangements & all necessary accesories complete - Class (Handicap Toilet) 2.00 No

code505 Providing and fixing PTMT extension nipple for water tank pipe, fittings

of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g 17.00 No

code506 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 27.00 Per Mtr

code507 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 5.00 Per Mtr

code508 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 18.00 Per Mtr

code509 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 19.00 Per Mtr

code510 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 18.00 Per Mtr

code511 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 11.00 Per Mtr

code512 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 2.00 Per Mtr

code513 FIRST FLOOR-Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with... 18.00 Per Mtr

code514 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP... 7.00 Per Mtr

code515 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 115.00 Per Mtr

code516 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 50.00 Per Mtr

code517 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete (All traps ) 25.00 No

code518 Providing and fixing 600x450 mm beveled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board ground fixed

to wooden cleats with C.P. brass screws and washers complet... 15.00 No

code519 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 (for drinking water point, Wash Basin and Ewc) 17.00 No

code520 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g (for Iwc , bath and washing ) 30.00 No

code521 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with t... 11.00 No

code522 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ... 1.00 No

code523 Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,... 10.00 No

code524 Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with st... 2.00 No

code525 Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with st... 4.00 No

code526 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 14.00 No

code527 Providing and fixing PTMT extension nipple for water tank pipe, fittings

of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g 14.00 No

code528 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 12.00 Per Mtr

code529 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 5.00 Per Mtr

code530 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 18.00 Per Mtr

code531 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 19.00 Per Mtr

code532 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 18.00 Per Mtr

code533 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 9.00 Per Mtr

code534 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 2.00 Per Mtr

code535 TERRACE FLOOR-Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete... 24.00 Per Mtr

code536 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 24.00 Per Mtr

code537 Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp... 2.00 Per Mtr

code538 C.I. grating 180X180 mm 4.00 No

code539 Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes of 150mm dia conforming to IS : 13592 Type A, including jointing

with seal ring conforming to IS : 5382, leaving 10 mm gap ... 32.00 Per Mtr

code540 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 78.00 Per Mtr

code541 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 4.00 Per Mtr

code542 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 54.00 Per Mtr

code543 Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 80 mm nominal bore 2.00 No

code544 Providing and fixing Wafer type single flange Butterfly valve conforming

to relevant IS 13099/9991 EN GGG40/50 with latest amendments as

detailed below of the following diameter and types with TP ... 1.00 No

code545 Supplying, installation, testing and commissioning of solar hot water

heater comprising of high quality Evacuated Glass Tube (EGT) with

absorber coating collector of size 58 x 1800 mm. Inner tank Ma... 7.00 No

code546 Installation & commissioning of energy efficient Air Source Heat Pump

(ASHP) unit of reputed make with 5 years warranty for Domestic Purpose

made of Enamel coated Steel with Mg Anode and having max... 6.00 No

code547 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an... 7500.00 l

code548 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv... 180.00 Kg

code549 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 50.00 m

code550 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 50.00 m

code551 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 200.00 m

code552 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 1640.00 m

code553 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 1835.00 m

code554 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 375.00 m

code555 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 30.00 m

code556 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 455.00 m

code557 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 680.00 m

code558 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 100.00 m

code559 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 5.00 m

code560 Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/lconduit entry as required with one coat of primer of approved make etc. 200x200x65 mm 12.00 Each

code561 Supplying and fixing PVC/Metal conduit Deep Junction box.19/20mm deep Junction box 150.00 Each

code562 Supplying and fixing PVC/Metal conduit Deep Junction box.25mm deep Junction box 50.00 Each

code563 Supplying and fixing PVC/Metal conduit Deep Junction box.32mm deep Junction box 50.00 Each

code564 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit in brick wall 50.00 m

code565 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit CC floor 50.00 m

code566 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.25mm 30.00 m

code567 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.32mm 30.00 m

code568 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.38mm 25.00 m

code569 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.50mm 25.00 m

code570 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 25.00 m

code571 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 25.00 m

code572 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 25.00 m

code573 Supplying and fixing S hook made out of 14mm dia MS Rod 5.00 No.

code574 Supplying and fixing of Metal Fan box with Round Hook. 103.00 No.

code575 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 12.00 Point

code576 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 35.00 Point

code577 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 247.00 Point

code578 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 87.00 Point

code579 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 1.00 Point

code580 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 750.00 m

code581 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 3060.00 m

code582 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 4520.00 m

code583 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 3320.00 m

code584 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 1260.00 m

code585 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 720.00 m

code586 Supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor conforming to IS 8130-1984 and (Virgin) PVC Insulation sheathed suitable for work... 230.00 m

code587 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N... 1.00 Each

code588 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N... 1.00 Each

code589 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall3W... 212.00 Each

code590 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall4-... 2.00 Each

code591 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall6 ... 6.00 Each

code592 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall8 ... 42.00 Each

code593 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall10... 28.00 Each

code594 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall16... 2.00 Each

code595 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall18... 4.00 Each

code596 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 212.00 Each

code597 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 2.00 Each

code598 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 6.00 Each

code599 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 43.00 Each

code600 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 29.00 Each

code601 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 2.00 Each

code602 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 4.00 Each

code603 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch 626.00 Each

code604 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps Two way Switch 16.00 Each

code605 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps 3way socket 260.00 Each

code606 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module. 103.00 Each

code607 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps one way switch 6.00 Each

code608 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Bell Push 24.00 Each

code609 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32Amps DP switch 5.00 Each

code610 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socket 6.00 Each

code611 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TV 2.00 Each

code612 Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box. 1.00 Each

code613 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. 2500.00 Sq CM

code614 Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. 2500.00 Sq CM

code615 Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab. 800.00 Each

code616 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Bakelite Ceiling Rose. 100.00 No.

code617 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Pendant Holder 20.00 No.

code618 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holder 304.00 No.

code619 Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB).The entire plug and socket shall be mounted in a thermoplastic I powder coa... 1.00 Each

code620 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 1.00 Each

code621 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 85.00 Each

code622 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 3.00 Each

code623 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 4.00 Each

code624 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 4.00 Each

code625 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.II - Double Door. 16 way SP&N 3.00 Each

code626 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.III - Double Door.4 Way TP & N 6.00 Each

code627 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.III - Double Door.6 Way TP & N 2.00 Each

code628 Supplying,fixing and wiring residual current circuit breaker (RCCB) 240v/450v upto 300mA sensitivity on exisitng wood panel board.16A-25A 2 pole 27.00 Each

code629 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.10 Sqmm,... 0.10 Km

code630 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.95 Sqmm,... 0.27 Km

code631 Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No. 1.17.1) 18.00 cm

code632 Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10) 18.00 cm

code633 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.2.5 sqmm to 25 sqmm 0.10 Km

code634 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.35 to 95 Sqmm 0.27 Km

code635 Supplying and fiixing of Brass Cable Gland.25mm dia 20.00 Each

code636 Supplying and fiixing of Brass Cable Gland.32mm dia 2.00 Each

code637 Supplying and fiixing of Brass Cable Gland.40 mm dia 2.00 Each

code638 GI Pipe, 100 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177) 10.00 m

code639 Laying of GI Pipe 10.00 m

code640 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.10 sqmm 16.00 Each

code641 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.95 Sqmm Copper Terminal, Apprx Wt: 58 Gm 8.00 Each

code642 Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required .150x50mm 10.00 m

code643 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul... 6.00 No

code644 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 8 SWG-GI Wire 150.00 m

code645 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 8 SWG-Cu Wire 75.00 m

code646 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm GI strip 40.00 m

code647 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm Copper strip 20.00 m

code648 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.600x600x3mm Copper plate 2.00 Each

code649 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz ... 5.00 Each

code650 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz ... 299.00 Each

code651 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has... 3.00 Each

code652 Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB w... 3.00 Each

code653 Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB w... 1.00 Each

code654 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. 6.00 Each

code655 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep (450 mm) 12.00 Each

code656 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu... 103.00 Each

code657 Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply. 300mm Sweep 1.00 Each

code658 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire... 311.00 Each

code659 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar... 104.00 Each

code660 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w... 18.00 Each

code661 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. 24.00 Each

code662 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc... 10.00 No

code663 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. 10.00 Each

code664 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M... 10.00 Each

code665 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,... 75000.00 Sq CM

code666 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i... 6.00 m

code667 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 6.00 m

code668 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 6.00 m

code669 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code670 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT 1.00 Each

code671 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le... 1.00 Each

code672 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo... 1.00 Each

code673 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C 3.00 Each

code674 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 3.00 Each

code675 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 3.00 Each

code676 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 3.00 Each

code677 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 2.00 Each

code678 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 12.00 Each

code679 Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standard... 1.00 Each

code680 GROUND FLOOR-Supplying Installing, testing and commissioning of 19mm dia 40.0m

length hose with rubber lining smooth bore, reinforced of natural/synthetic

fibres, a rubber cover finishshall besmooth... 1.00 No

code681 Supply, installation of 4kg Fire Extinguisher Mono Ammonium

PhosphatePowder 50, StoredPressure Type, Pressure Gauge, Gross

Weight 6.9Kg, emptyweight 2.9Kg, Can Height 440MM, Diameter

140MM, Dischar... 5.00 No

code682 Supplyandinstallationof2KgC02 Gas Type Fire Extinugisher Squeeze

grip type, usedUnusedMechanism, SqueezeGrip,GrossWeight 9.1Kg.

emptyWeight 7.1Kg. CanHeight 595MMDiameter 108MM,Discharge

Time less ... 3.00 No

code683 Supply and installationof 4.5Kg C02 Gas Type aluminium body

Squeeze grip Fire Extinugisher, TrolleyMounted, Easy Weight Management,

Used UnusedMechanism, Squeeze Grip, Gross Weight 11.16Kg.

empty W... 1.00 No

code684 Providing and Fixing Fire force boardsize of 3'x2 'madeout to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials, labour,usage charge... 2.00 Per Mtr

code685 FIRST FLOOR- Supplying Installing, testing and commissioning of 19mm dia 40.0m

length hose with rubber lining smooth bore, reinforced of natural/synthetic

fibres, a rubber cover finishshall besmooth... 1.00 No

code686 Supply, installation of 4kg Fire Extinguisher Mono Ammonium

PhosphatePowder 50, StoredPressure Type, Pressure Gauge, Gross

Weight 6.9Kg, emptyweight 2.9Kg, Can Height 440MM, Diameter

140MM, Dischar... 5.00 No

code687 Supplyandinstallationof2KgC02 Gas Type Fire Extinugisher Squeeze

grip type, usedUnusedMechanism, SqueezeGrip,GrossWeight 9.1Kg.

emptyWeight 7.1Kg. CanHeight 595MMDiameter 108MM,Discharge

Time less ... 2.00 No

code688 Providing and Fixing Fire force boardsize of 3'x2 'madeout to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials, labour,usage charge... 2.00 Per Mtr

code689 TERRRACE Supply, installation, testingand commissioning electrically driven Terrance

pump of capacity 450.0 Lpm at 35.0m Head bronze impeller pump coupled to

electrical driven moto rwith suitabl eHP... 1.00 No

code690 Supplying, installing, testing & commissioning approved make heavyduty

(Class 'C') GIpipes and fittings confirming to IS1239 PI&II,Malleable

Specialssuchastees, longradiusbends,checknuts,unions, fla... 21.00 Per Mtr

code691 Supplying ,installing, testing and commissioning of PN16CI butterfly valves

of confirming to IS13039 with necessary nuts & bolts etc .,complete----etc.,

complete as per specificaiton with all lead a... 2.00 No

code692 Supplying installing, testingandcommissioningof PN16CI "NonReturn

Valve"confirmingtoIS13039withnecessaryboltsandnutsetccomplete

includes cost of allmaterials labour chargeswithall lead lift loadinga... 1.00 No

code693 supply and installing testing and commissioning of CI " Y " stainer

confirming toISstandardwithnecessaryboltsandnutscomplete includes

costofallmaterials labourchargeswithall leadlift loadingandunloa... 1.00 No

code694 Supplying Installing, testing and commissioning of Gun metal AIR

RELEASE VALVE SIZE OF 25mm dia in cluding costo fmaterials, labour,

usage charges of machinery complete as per specifications. Comp... 1.00 No

code695 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an... 10000.00 l

code696 GIRLS HOSTEL - GROUND FLOOR - Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier... 17.72 Sqm

code697 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te... 531.72 Cum

code698 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 1122.05 Cum

code699 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 480.88 Cum

code700 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) 500.88 Cum

code701 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to... 1003.11 Sqm

code702 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r... 1122.05 Cum

code703 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ... 2329.58 Cum

code704 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes... 209.78 Cum

code705 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 295.75 Cum

code706 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 12.56 Cum

code707 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 114.58 Cum

code708 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 40.25 Cum

code709 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 44.42 Tonne

code710 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 56.05 Cum

code711 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 90.59 Cum

code712 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 145.30 Cum

code713 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 20.87 Cum

code714 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 8.26 Cum

code715 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 20.50 Cum

code716 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 43.48 Tonne

code717 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 1410.03 Sqm

code718 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 310.58 Sqm

code719 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo... 47.04 Sqm

code720 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c... 1.16 Cum

code721 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani... 20.00 No

code722 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Handles 300mm 40.00 No

code723 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm 20.00 No

code724 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 40.00 No

code725 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm 80.00 No

code726 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm 20.00 No

code727 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 20.00 No

code728 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ... 120.00 No

code729 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. 106.40 m

code730 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di... 112.90 Sqm

code731 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e... 112.90 Sqm

code732 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 137.70 Sqm

code733 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr... 16.56 Sqm

code734 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 3239.46 Kg

code735 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 154.26 Sqm

code736 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 154.26 Sqm

code737 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi... 171.00 m

code738 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 47.25 Sqm

code739 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u... 20.00 No

code740 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 1853.13 Sqm

code741 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 3466.40 Sqm

code742 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 1281.81 Sqm

code743 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific... 1130.70 m

code744 Providing and fixing suitable Plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ... 774.70 m

code745 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm... 464.98 Sqm

code746 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d... 315.21 Sqm

code747 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c... 41.85 Sqm

code748 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 24.00 Sqm

code749 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.... 432.00 Kg

code750 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 3466.40 Sqm

code751 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 1281.81 Sqm

code752 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm... 58.02 Sqm

code753 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi... 517.86 Sqm

code754 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c... 221.27 Sqm

code755 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,... 140.54 Sqm

code756 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 517.86 Sqm

code757 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur... 42.16 Cum

code758 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 14.05 Cum

code759 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 10.25 Cum

code760 Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination (preferably white) on factory pressed BWP gr... 416.67 Sqm

code761 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in- charge. 150mm length 172.00 No

code762 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75mm 172.00 No

code763 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 172.00 No

code764 Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with screws etc. com... 516.00 No

code765 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 172.00 No

code766 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality forcupboard /wardrobe/kitchen shutters including necessary synthetic resin hot pressed to edges on binding mach... 879.35 m

code767 Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work 265.43 Sqm

code768 Providing and supplying 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. for use ... 129.15 Sqm

code769 FIRST FLOOR - GIRLS HOSTEL. Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.... 56.05 Cum

code770 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 86.14 Cum

code771 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 131.52 Cum

code772 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 21.61 Cum

code773 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 7.52 Cum

code774 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 21.99 Cum

code775 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 41.79 Tonne

code776 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 1475.58 Sqm

code777 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 302.36 Sqm

code778 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo... 39.90 Sqm

code779 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c... 0.93 Cum

code780 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani... 18.00 No

code781 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Handles 300mm 36.00 No

code782 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm 18.00 No

code783 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 36.00 No

code784 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm 72.00 No

code785 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm 18.00 No

code786 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 18.00 No

code787 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ... 108.00 No

code788 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. 94.60 m

code789 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di... 95.76 Sqm

code790 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e... 95.76 Sqm

code791 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 156.60 Sqm

code792 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr... 15.48 Sqm

code793 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 3613.68 Kg

code794 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 172.08 Sqm

code795 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 172.08 Sqm

code796 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi... 159.60 m

code797 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 44.10 Sqm

code798 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u... 18.00 No

code799 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 1749.00 Sqm

code800 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 3302.32 Sqm

code801 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 1262.73 Sqm

code802 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific... 1130.70 m

code803 Providing and fixing suitable Plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ... 774.70 m

code804 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm... 517.33 Sqm

code805 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d... 222.59 Sqm

code806 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c... 41.85 Sqm

code807 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 24.00 Sqm

code808 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.... 432.00 Kg

code809 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 3302.32 Sqm

code810 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 1262.73 Sqm

code811 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi... 488.46 Sqm

code812 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c... 208.73 Sqm

code813 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,... 132.65 Sqm

code814 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 488.46 Sqm

code815 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur... 39.80 Cum

code816 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 13.27 Cum

code817 Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination (preferably white) on factory pressed BWP gr... 465.12 Sqm

code818 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in- charge. 150mm length 192.00 No

code819 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75mm 192.00 No

code820 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 192.00 No

code821 Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with screws etc. com... 576.00 No

code822 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 192.00 No

code823 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality forcupboard /wardrobe/kitchen shutters including necessary synthetic resin hot pressed to edges on binding mach... 981.60 m

code824 Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work 298.80 Sqm

code825 Providing and supplying 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. for use ... 151.20 Sqm

code826 TERRACE FLOOR - GIRLS HOSTEL Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3... 4.54 Cum

code827 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 14.13 Cum

code828 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 5.52 Cum

code829 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 7.06 Cum

code830 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 1.72 Cum

code831 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 45.05 Cum

code832 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 9.04 Kg

code833 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 564.43 Sqm

code834 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi... 3.78 Sqm

code835 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 5.40 Sqm

code836 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 113.40 Kg

code837 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 173.10 Sqm

code838 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 136.26 Sqm

code839 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 1012.26 Sqm

code840 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 173.10 Sqm

code841 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 1012.26 Sqm

code842 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 9.18 Sqm

code843 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 9.18 Sqm

code844 Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, in... 1080.40 Sqm

code845 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 47.45 Cum

code846 GROUND FLOOR-Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings wit... 20.00 Per Mtr

code847 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP... 7.00 Per Mtr

code848 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 127.00 Per Mtr

code849 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 62.00 Per Mtr

code850 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete (All traps ) 28.00 No

code851 Providing and fixing 600x450 mm beveled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board ground fixed

to wooden cleats with C.P. brass screws and washers complet... 17.00 No

code852 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 (for drinking water point, Wash Basin and Ewc ) 22.00 No

code853 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g (for Iwc , bath, wardenroom, seek room and washing ) 31.00 No

code854 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with t... 15.00 No

code855 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and c... 1.00 No

code856 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ... 4.00 No

code857 Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,... 13.00 No

code858 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 3.00 No

code859 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 3.00 No

code860 Providing and fixing Stainless Steel Grab Bar 600 mm Long with all

concealed fitting arrangements & all necessary accesories complete - Class (Handicap Toilet) 2.00 No

code861 Providing and fixing PTMT extension nipple for water tank pipe, fittings

of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g 17.00 No

code862 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 27.00 Per Mtr

code863 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 5.00 Per Mtr

code864 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 18.00 Per Mtr

code865 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 19.00 Per Mtr

code866 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 18.00 Per Mtr

code867 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 11.00 Per Mtr

code868 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 2.00 Per Mtr

code869 FIRST FLOOR-Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with... 18.00 Per Mtr

code870 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP... 7.00 Per Mtr

code871 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 117.00 Per Mtr

code872 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 52.00 Per Mtr

code873 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete (All traps ) 25.00 No

code874 Providing and fixing 600x450 mm beveled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board ground fixed

to wooden cleats with C.P. brass screws and washers complet... 15.00 No

code875 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 (for drinking water point, Wash Basin and Ewc) 17.00 No

code876 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g (for Iwc , bath and washing ) 30.00 No

code877 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with t... 15.00 No

code878 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ... 1.00 No

code879 Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,... 13.00 No

code880 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 14.00 No

code881 Providing and fixing PTMT extension nipple for water tank pipe, fittings

of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g 14.00 No

code882 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 12.00 Per Mtr

code883 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 5.00 Per Mtr

code884 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 18.00 Per Mtr

code885 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 19.00 Per Mtr

code886 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 18.00 Per Mtr

code887 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 9.00 Per Mtr

code888 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 2.00 Per Mtr

code889 TERRACE FLOOR-Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete... 24.00 Per Mtr

code890 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 24.00 Per Mtr

code891 Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp... 2.00 Per Mtr

code892 C.I. grating 180X180 mm 4.00 No

code893 Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes of 150mm dia conforming to IS : 13592 Type A, including jointing

with seal ring conforming to IS : 5382, leaving 10 mm gap ... 32.00 Per Mtr

code894 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 78.00 Per Mtr

code895 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 4.00 Per Mtr

code896 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 54.00 Per Mtr

code897 Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 80 mm nominal bore 2.00 No

code898 Providing and fixing Wafer type single flange Butterfly valve conforming

to relevant IS 13099/9991 EN GGG40/50 with latest amendments as

detailed below of the following diameter and types with TP ... 1.00 No

code899 Supplying, installation, testing and commissioning of solar hot water

heater comprising of high quality Evacuated Glass Tube (EGT) with

absorber coating collector of size 58 x 1800 mm. Inner tank Ma... 7.00 No

code900 Installation & commissioning of energy efficient Air Source Heat Pump

(ASHP) unit of reputed make with 5 years warranty for Domestic Purpose

made of Enamel coated Steel with Mg Anode and having max... 6.00 No

code901 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an... 7500.00 l

code902 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv... 180.00 Kg

code903 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 50.00 m

code904 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 50.00 m

code905 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 200.00 m

code906 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 1640.00 m

code907 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 1835.00 m

code908 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 375.00 m

code909 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 30.00 m

code910 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 455.00 m

code911 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 680.00 m

code912 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 100.00 m

code913 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 5.00 m

code914 Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/lconduit entry as required with one coat of primer of approved make etc. 200x200x65 mm 12.00 Each

code915 Supplying and fixing PVC/Metal conduit Deep Junction box.19/20mm deep Junction box 150.00 Each

code916 Supplying and fixing PVC/Metal conduit Deep Junction box.25mm deep Junction box 50.00 Each

code917 Supplying and fixing PVC/Metal conduit Deep Junction box.32mm deep Junction box 50.00 Each

code918 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit in brick wall 50.00 m

code919 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit CC floor 50.00 m

code920 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.25mm 30.00 m

code921 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.32mm 30.00 m

code922 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.38mm 25.00 m

code923 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.50mm 25.00 m

code924 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 25.00 m

code925 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 25.00 m

code926 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 25.00 m

code927 Supplying and fixing S hook made out of 14mm dia MS Rod 5.00 No.

code928 Supplying and fixing of Metal Fan box with Round Hook. 103.00 No.

code929 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 12.00 Point

code930 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 35.00 Point

code931 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 247.00 Point

code932 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 87.00 Point

code933 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 1.00 Point

code934 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 750.00 m

code935 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 3060.00 m

code936 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 4520.00 m

code937 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 3320.00 m

code938 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 1260.00 m

code939 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 720.00 m

code940 Supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor conforming to IS 8130-1984 and (Virgin) PVC Insulation sheathed suitable for work... 230.00 m

code941 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N... 1.00 Each

code942 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N... 1.00 Each

code943 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall3W... 212.00 Each

code944 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall4-... 2.00 Each

code945 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall6 ... 6.00 Each

code946 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall8 ... 42.00 Each

code947 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall10... 28.00 Each

code948 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall16... 2.00 Each

code949 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall18... 4.00 Each

code950 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 212.00 Each

code951 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 2.00 Each

code952 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 6.00 Each

code953 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 43.00 Each

code954 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 29.00 Each

code955 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 2.00 Each

code956 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 4.00 Each

code957 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch 626.00 Each

code958 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps Two way Switch 16.00 Each

code959 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps 3way socket 260.00 Each

code960 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module. 103.00 Each

code961 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps one way switch 6.00 Each

code962 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Bell Push 24.00 Each

code963 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32Amps DP switch 5.00 Each

code964 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socket 6.00 Each

code965 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TV 2.00 Each

code966 Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box. 1.00 Each

code967 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. 2500.00 Sq CM

code968 Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. 2500.00 Sq CM

code969 Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab. 800.00 Each

code970 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Bakelite Ceiling Rose. 100.00 No.

code971 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Pendant Holder 20.00 No.

code972 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holder 304.00 No.

code973 Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB).The entire plug and socket shall be mounted in a thermoplastic I powder coa... 1.00 Each

code974 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 1.00 Each

code975 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 85.00 Each

code976 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 3.00 Each

code977 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 4.00 Each

code978 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 4.00 Each

code979 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.II - Double Door. 16 way SP&N 3.00 Each

code980 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.III - Double Door.4 Way TP & N 6.00 Each

code981 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.III - Double Door.6 Way TP & N 2.00 Each

code982 Supplying,fixing and wiring residual current circuit breaker (RCCB) 240v/450v upto 300mA sensitivity on exisitng wood panel board.16A-25A 2 pole 27.00 Each

code983 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.10 Sqmm,... 0.10 Km

code984 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.95 Sqmm,... 0.36 Km

code985 Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No. 1.17.1) 18.00 cm

code986 Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10) 18.00 cm

code987 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.2.5 sqmm to 25 sqmm 0.10 Km

code988 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.35 to 95 Sqmm 0.36 Km

code989 Supplying and fiixing of Brass Cable Gland.25mm dia 20.00 Each

code990 Supplying and fiixing of Brass Cable Gland.32mm dia 2.00 Each

code991 Supplying and fiixing of Brass Cable Gland.40 mm dia 2.00 Each

code992 GI Pipe, 100 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177) 10.00 m

code993 Laying of GI Pipe 10.00 m

code994 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.10 sqmm 16.00 Each

code995 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.95 Sqmm Copper Terminal, Apprx Wt: 58 Gm 8.00 Each

code996 Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required .150x50mm 10.00 m

code997 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul... 6.00 No

code998 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 8 SWG-GI Wire 150.00 m

code999 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 8 SWG-Cu Wire 75.00 m

code1000 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm GI strip 40.00 m

code1001 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm Copper strip 20.00 m

code1002 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.600x600x3mm Copper plate 2.00 Each

code1003 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz ... 5.00 Each

code1004 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz ... 299.00 Each

code1005 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has... 3.00 Each

code1006 Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB w... 3.00 Each

code1007 Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB w... 1.00 Each

code1008 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. 6.00 Each

code1009 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep (450 mm) 12.00 Each

code1010 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu... 103.00 Each

code1011 Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply. 300mm Sweep 1.00 Each

code1012 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire... 311.00 Each

code1013 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar... 104.00 Each

code1014 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w... 18.00 Each

code1015 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. 24.00 Each

code1016 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc... 10.00 No

code1017 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. 10.00 Each

code1018 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M... 10.00 Each

code1019 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,... 75000.00 Sq CM

code1020 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i... 6.00 m

code1021 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 6.00 m

code1022 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 6.00 m

code1023 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1024 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT 1.00 Each

code1025 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le... 1.00 Each

code1026 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo... 1.00 Each

code1027 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C 3.00 Each

code1028 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 3.00 Each

code1029 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 3.00 Each

code1030 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 3.00 Each

code1031 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 2.00 Each

code1032 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 12.00 Each

code1033 Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standard... 1.00 Each

code1034 GROUND FLOOR-Supplying Installing, testing and commissioning of 19mm dia 40.0m

length hose with rubber lining smooth bore, reinforced of natural/synthetic

fibres, a rubber cover finishshall besmooth... 1.00 No

code1035 Supply, installation of 4kg Fire Extinguisher Mono Ammonium

PhosphatePowder 50, StoredPressure Type, Pressure Gauge, Gross

Weight 6.9Kg, emptyweight 2.9Kg, Can Height 440MM, Diameter

140MM, Dischar... 5.00 No

code1036 Supplyandinstallationof2KgC02 Gas Type Fire Extinugisher Squeeze

grip type, usedUnusedMechanism, SqueezeGrip,GrossWeight 9.1Kg.

emptyWeight 7.1Kg. CanHeight 595MMDiameter 108MM,Discharge

Time less ... 3.00 No

code1037 Supply and installationof 4.5Kg C02 Gas Type aluminium body

Squeeze grip Fire Extinugisher, TrolleyMounted, Easy Weight Management,

Used UnusedMechanism, Squeeze Grip, Gross Weight 11.16Kg.

empty W... 1.00 No

code1038 Providing and Fixing Fire force boardsize of 3'x2 'madeout to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials, labour,usage charge... 2.00 Per Mtr

code1039 FIRST FLOOR-Supplying Installing, testing and commissioning of 19mm dia 40.0m

length hose with rubber lining smooth bore, reinforced of natural/synthetic

fibres, a rubber cover finishshall besmooth,... 1.00 No

code1040 Supply, installation of 4kg Fire Extinguisher Mono Ammonium

PhosphatePowder 50, StoredPressure Type, Pressure Gauge, Gross

Weight 6.9Kg, emptyweight 2.9Kg, Can Height 440MM, Diameter

140MM, Dischar... 5.00 No

code1041 Supplyandinstallationof2KgC02 Gas Type Fire Extinugisher Squeeze

grip type, usedUnusedMechanism, SqueezeGrip,GrossWeight 9.1Kg.

emptyWeight 7.1Kg. CanHeight 595MMDiameter 108MM,Discharge

Time less ... 2.00 No

code1042 Providing and Fixing Fire force boardsize of 3'x2 'madeout to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials, labour,usage charge... 2.00 m

code1043 TERRACE-Supply, installation, testingand commissioning electrically driven Terrance

pump of capacity 450.0 Lpm at 35.0m Head bronze impeller pump coupled to

electrical driven moto rwith suitabl eHP ... 1.00 No

code1044 Supplying, installing, testing & commissioning approved make heavyduty

(Class 'C') GIpipes and fittings confirming to IS1239 PI&II,Malleable

Specialssuchastees, longradiusbends,checknuts,unions, fla... 21.00 Per Mtr

code1045 Supplying ,installing, testing and commissioning of PN16CI butterfly valves

of confirming to IS13039 with necessary nuts & bolts etc .,complete----etc.,

complete as per specificaiton with all lead a... 2.00 No

code1046 Supplying installing, testingandcommissioningof PN16CI "NonReturn

Valve"confirmingtoIS13039withnecessaryboltsandnutsetccomplete

includes cost of allmaterials labour chargeswithall lead lift loadinga... 1.00 No

code1047 supply and installing testing and commissioning of CI " Y " stainer

confirming toISstandardwithnecessaryboltsandnutscomplete includes

costofallmaterials labourchargeswithall leadlift loadingandunloa... 1.00 No

code1048 Supplying Installing, testing and commissioning of Gun metal AIR

RELEASE VALVE SIZE OF 25mm dia in cluding costo fmaterials, labour,

usage charges of machinery complete as per specifications. Comp... 1.00 No

code1049 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an... 10000.00 l

code1050 KITCHEN & DINING BLOCK. GROUND FLOOR - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shor... 394.80 Cum

code1051 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 169.20 Cum

code1052 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) 189.20 Cum

code1053 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to... 483.93 Sqm

code1054 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r... 394.80 Cum

code1055 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ... 641.66 Cum

code1056 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes... 84.37 Cum

code1057 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 93.51 Cum

code1058 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 6.69 Cum

code1059 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 41.38 Cum

code1060 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 11.08 Cum

code1061 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 14.50 Tonne

code1062 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 28.59 Cum

code1063 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 70.79 Cum

code1064 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 73.37 Cum

code1065 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 6.63 Cum

code1066 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 2.26 Cum

code1067 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 13.87 Cum

code1068 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 26.10 Tonne

code1069 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 470.71 Sqm

code1070 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 126.58 Sqm

code1071 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo... 21.84 Sqm

code1072 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c... 0.67 Cum

code1073 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani... 6.00 No

code1074 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Handles 300mm 12.00 No

code1075 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm 6.00 No

code1076 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 12.00 No

code1077 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm 24.00 No

code1078 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm 6.00 No

code1079 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 6.00 No

code1080 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ... 36.00 No

code1081 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. 37.90 m

code1082 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di... 52.42 Sqm

code1083 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e... 52.42 Sqm

code1084 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 56.70 Sqm

code1085 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr... 4.32 Sqm

code1086 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 1281.42 Kg

code1087 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 61.02 Sqm

code1088 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 61.02 Sqm

code1089 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi... 5.70 m

code1090 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 1.58 Sqm

code1091 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u... 6.00 No

code1092 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 729.06 Sqm

code1093 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 1602.15 Sqm

code1094 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 384.84 Sqm

code1095 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific... 477.00 m

code1096 Providing and fixing suitable Plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ... 354.00 m

code1097 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d... 496.77 Sqm

code1098 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 30.30 Sqm

code1099 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.... 468.00 Kg

code1100 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 1602.15 Sqm

code1101 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 384.84 Sqm

code1102 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm... 32.94 Sqm

code1103 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi... 55.86 Sqm

code1104 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c... 8.73 Sqm

code1105 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,... 4.95 Sqm

code1106 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 55.86 Sqm

code1107 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur... 1.49 Cum

code1108 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 0.50 Cum

code1109 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 5.94 Cum

code1110 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 144.00 Sqm

code1111 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. 240.00 m

code1112 TERRACE FLOOR - KITCHEN & DINING BLOCK Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates ... 7.94 Cum

code1113 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 2.46 Cum

code1114 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 1.31 Kg

code1115 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 123.00 Sqm

code1116 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 270.60 Sqm

code1117 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 270.60 Sqm

code1118 Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, in... 540.83 Sqm

code1119 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 25.20 Cum

code1120 KITCHEN FLOOR PHE-Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fitting... 16.00 Per Mtr

code1121 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP... 8.00 Per Mtr

code1122 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 28.00 Per Mtr

code1123 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 4.00 Per Mtr

code1124 C.I. grating 180X180 mm (For kitchen drain and terrace) 90.00 No

code1125 Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal e... 28.00 Per Mtr

code1126 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete (All traps ) 13.00 No

code1127 Providing and fixing 600x450 mm beveled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board ground fixed

to wooden cleats with C.P. brass screws and washers complet... 8.00 No

code1128 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 (For Sink with OHS and Drinking water points) 5.00 No

code1129 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g 11.00 No

code1130 Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,... 1.00 No

code1131 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 9.00 No

code1132 Providing and fixing PTMT extension nipple for water tank pipe, fittings

of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g 8.00 No

code1133 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 44.00 Per Mtr

code1134 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 13.00 Per Mtr

code1135 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 4.00 Per Mtr

code1136 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 26.00 Per Mtr

code1137 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 5.00 Per Mtr

code1138 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 17.00 Per Mtr

code1139 Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 32 mm nominal bore 1.00 No

code1140 Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 50 mm nominal bore 2.00 No

code1141 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an... 7500.00 l

code1142 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv... 45.00 Kg

code1143 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 80.00 m

code1144 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 120.00 m

code1145 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 650.00 m

code1146 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 362.00 m

code1147 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 80.00 m

code1148 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 75.00 m

code1149 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 155.00 m

code1150 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 15.00 m

code1151 Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/lconduit entry as required with one coat of primer of approved make etc.200x200x65 mm 3.00 Each

code1152 Supplying and fixing PVC/Metal conduit Deep Junction box.19/20mm deep Junction box 60.00 Each

code1153 Supplying and fixing PVC/Metal conduit Deep Junction box.25mm deep Junction box 5.00 Each

code1154 Supplying and fixing PVC/Metal conduit Deep Junction box.32mm deep Junction box 5.00 Each

code1155 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit in brick wall 10.00 m

code1156 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit CC floor 10.00 m

code1157 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.38mm 10.00 m

code1158 Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required.50mm 10.00 m

code1159 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 10.00 m

code1160 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 10.00 m

code1161 Supplying and fixing of Metal Fan box with Round Hook. 30.00 No.

code1162 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 3.00 Point

code1163 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 8.00 Point

code1164 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 49.00 Point

code1165 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 29.00 Point

code1166 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 250.00 m

code1167 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 760.00 m

code1168 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 770.00 m

code1169 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 620.00 m

code1170 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 240.00 m

code1171 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 90.00 m

code1172 Supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor conforming to IS 8130-1984 and (Virgin) PVC Insulation sheathed suitable for work... 130.00 m

code1173 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N... 1.00 Each

code1174 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N... 1.00 Each

code1175 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.3... 7.00 Each

code1176 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.4... 1.00 Each

code1177 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.6... 9.00 Each

code1178 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.8... 4.00 Each

code1179 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1... 1.00 Each

code1180 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1... 2.00 Each

code1181 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1... 8.00 Each

code1182 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 7.00 Each

code1183 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 1.00 Each

code1184 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 9.00 Each

code1185 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 5.00 Each

code1186 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 2.00 Each

code1187 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 2.00 Each

code1188 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 8.00 Each

code1189 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch 87.00 Each

code1190 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps Two way Switch 2.00 Each

code1191 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps 3way socket 17.00 Each

code1192 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module. 30.00 Each

code1193 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps one way switch 10.00 Each

code1194 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Bell Push 1.00 Each

code1195 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32Amps DP switch 8.00 Each

code1196 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socket 18.00 Each

code1197 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TV 1.00 Each

code1198 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. 750.00 Sq CM

code1199 Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab. 50.00 Each

code1200 Supplying and fixing of metal clad industrial plugs and sockets 2 Pole + earth 250V PLUG.3 Pole + earth 440V PLUG .32A 2.00 Each

code1201 Supplying and fixing of metal clad industrial plugs and sockets 2 Pole + earth 250V PLUG.3pole+earth 440V SOCKET.32A 2.00 Each

code1202 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..6A Bakelite Ceiling Rose. 10.00 No.

code1203 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..6A Pendant Holder 2.00 No.

code1204 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..6A Batten Holder 82.00 No.

code1205 Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB).The entire plug and socket shall be mounted in a thermoplastic I powder coa... 2.00 Each

code1206 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 2.00 Each

code1207 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 30.00 Each

code1208 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 1.00 Each

code1209 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 2.00 Each

code1210 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 1.00 Each

code1211 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure. II - Double Door.16 way SP&N 1.00 Each

code1212 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure. III - Double Door.4 Way TP & N 2.00 Each

code1213 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure. III - Double Door.6 Way TP & N 1.00 Each

code1214 Supplying,fixing and wiring residual current circuit breaker (RCCB) 240v/450v upto 300mA sensitivity on exisitng wood panel board.16A-25A 2 pole 10.00 Each

code1215 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.10 Sqmm,... 0.15 Km

code1216 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.70 Sqmm,... 0.32 Km

code1217 Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No. 1.17.1) 18.00 cm

code1218 Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10) 18.00 cm

code1219 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.2.5 sqmm to 25 sqmm 0.15 Km

code1220 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.35 sqmm to 95 sqmm 0.32 Km

code1221 Supplying and fiixing of Brass Cable Gland.25mm dia 10.00 Each

code1222 Supplying and fiixing of Brass Cable Gland.32mm dia 2.00 Each

code1223 Supplying and fiixing of Brass Cable Gland.40 mm dia 2.00 Each

code1224 GI Pipe, 100 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177) 10.00 m

code1225 Laying of GI Pipe 10.00 m

code1226 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes..10 sqmm 32.00 Each

code1227 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes..70 Sqmm Copper Terminal, Apprx Wt: 38 Gm 4.00 Each

code1228 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul... 4.00 No

code1229 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 8 SWG-GI Wire 100.00 m

code1230 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip 20.00 m

code1231 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz ... 6.00 Each

code1232 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz ... 78.00 Each

code1233 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. 3.00 Each

code1234 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep (450 mm) 3.00 Each

code1235 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu... 30.00 Each

code1236 Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply.300mm Sweep 1.00 Each

code1237 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire... 84.00 Each

code1238 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar... 31.00 Each

code1239 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w... 6.00 Each

code1240 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. 1.00 Each

code1241 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc... 4.00 No

code1242 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. 4.00 Each

code1243 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M... 4.00 Each

code1244 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,... 45000.00 Sq CM

code1245 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i... 4.00 m

code1246 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 4.00 m

code1247 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 4.00 m

code1248 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1249 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT 1.00 Each

code1250 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le... 1.00 Each

code1251 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo... 1.00 Each

code1252 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C 3.00 Each

code1253 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 3.00 Each

code1254 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 3.00 Each

code1255 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 4.00 Each

code1256 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 4.00 Each

code1257 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 5.00 Each

code1258 Supply, installation, testingand commissioning electrically driven Terrance

pump of capacity 450.0 Lpm at 35.0m Head bronze impeller pump coupled to

electrical driven moto rwith suitabl eHP withall ... 1.00 No

code1259 Supplying, installing, testing & commissioning approved make heavyduty

(Class 'C') GIpipes and fittings confirming to IS1239 PI&II,Malleable

Specialssuchastees, longradiusbends,checknuts,unions, fla... 17.00 Per Mtr

code1260 Supplying ,installing, testing and commissioning of PN16CI butterfly valves

of confirming to IS13039 with necessary nuts & bolts etc .,complete----etc.,

complete as per specificaiton with all lead a... 2.00 No

code1261 Supplying installing, testingandcommissioningof PN16CI "NonReturn

Valve"confirmingtoIS13039withnecessaryboltsandnutsetccomplete

includes cost of allmaterials labour chargeswithall lead lift loadinga... 1.00 No

code1262 supply and installing testing and commissioning of CI " Y " stainer

confirming toISstandardwithnecessaryboltsandnutscomplete includes

costofallmaterials labourchargeswithall leadlift loadingandunloa... 1.00 No

code1263 Supplying Installing, testing and commissioning of Gun metal AIR

RELEASE VALVE SIZE OF 25mm dia in cluding costo fmaterials, labour,

usage charges of machinery complete as per specifications. Comp... 1.00 No

code1264 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an... 10000.00 l

code1265 Supplying Installing, testing and commissioning of 19mm dia 40.0m

length hose with rubber lining smooth bore, reinforced of natural/synthetic

fibres, a rubber cover finishshall besmooth, flutedor fa... 1.00 No

code1266 Supply, installation of 4kg Fire Extinguisher Mono Ammonium

PhosphatePowder 50, StoredPressure Type, Pressure Gauge, Gross

Weight 6.9Kg, emptyweight 2.9Kg, Can Height 440MM, Diameter

140MM, Dischar... 2.00 No

code1267 Supplyandinstallationof2KgC02 Gas Type Fire Extinugisher Squeeze

grip type, usedUnusedMechanism, SqueezeGrip,GrossWeight 9.1Kg.

emptyWeight 7.1Kg. CanHeight 595MMDiameter 108MM,Discharge

Time less ... 2.00 No

code1268 Providing and Fixing Fire force boardsize of 3'x2 'madeout to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials, labour,usage charge... 1.00 Per Mtr

code1269 TEACHING QUARTERS. GROUND FLOOR - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, ... 267.84 Cum

code1270 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 114.79 Cum

code1271 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) 134.79 Cum

code1272 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to... 287.00 Sqm

code1273 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r... 267.84 Cum

code1274 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ... 340.80 Cum

code1275 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes... 64.29 Cum

code1276 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 93.35 Cum

code1277 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 6.80 Cum

code1278 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe... 32.31 Cum

code1279 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 6.61 Cum

code1280 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 12.70 Tonne

code1281 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 20.41 Cum

code1282 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 20.67 Cum

code1283 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 34.99 Cum

code1284 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 7.56 Cum

code1285 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 2.97 Cum

code1286 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 5.82 Cum

code1287 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 12.18 Tonne

code1288 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 446.86 Sqm

code1289 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 219.24 Sqm

code1290 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo... 24.36 Sqm

code1291 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c... 0.92 Cum

code1292 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani... 12.00 No

code1293 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Handles 300mm 24.00 No

code1294 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm 12.00 No

code1295 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 24.00 No

code1296 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm 48.00 No

code1297 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm 12.00 No

code1298 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 12.00 No

code1299 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ... 72.00 No

code1300 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. 62.00 m

code1301 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di... 58.46 Sqm

code1302 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e... 58.46 Sqm

code1303 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 47.99 Sqm

code1304 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr... 2.88 Sqm

code1305 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 1172.12 Kg

code1306 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 55.82 Sqm

code1307 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 55.82 Sqm

code1308 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi... 68.40 m

code1309 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 18.90 Sqm

code1310 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u... 12.00 No

code1311 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 921.12 Sqm

code1312 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 1418.36 Sqm

code1313 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 362.03 Sqm

code1314 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific... 431.70 m

code1315 Providing and fixing suitable Plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ... 308.70 m

code1316 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm... 212.48 Sqm

code1317 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d... 33.07 Sqm

code1318 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c... 15.01 Sqm

code1319 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 12.24 Sqm

code1320 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.... 216.00 Kg

code1321 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 1418.36 Sqm

code1322 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 362.03 Sqm

code1323 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm... 11.04 Sqm

code1324 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi... 134.82 Sqm

code1325 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c... 36.00 Sqm

code1326 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,... 20.16 Sqm

code1327 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 134.82 Sqm

code1328 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur... 6.05 Cum

code1329 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 2.02 Cum

code1330 FIRST FLOOR - TEACHING QUARTERS. Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges up... 20.41 Cum

code1331 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 20.67 Cum

code1332 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 34.99 Cum

code1333 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 7.56 Cum

code1334 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 2.97 Cum

code1335 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 5.82 Cum

code1336 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 12.18 Tonne

code1337 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 446.86 Sqm

code1338 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 219.24 Sqm

code1339 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo... 24.36 Sqm

code1340 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c... 0.92 Cum

code1341 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani... 12.00 No

code1342 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Handles 300mm 24.00 No

code1343 Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm 12.00 No

code1344 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm 24.00 No

code1345 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm 48.00 No

code1346 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm 12.00 No

code1347 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 12.00 No

code1348 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ... 72.00 No

code1349 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. 62.00 m

code1350 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di... 58.46 Sqm

code1351 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e... 58.46 Sqm

code1352 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 47.99 Sqm

code1353 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr... 2.88 Sqm

code1354 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 1172.12 Kg

code1355 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 55.82 Sqm

code1356 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 55.82 Sqm

code1357 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi... 68.40 m

code1358 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 18.90 Sqm

code1359 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u... 12.00 No

code1360 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 921.12 Sqm

code1361 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 1418.36 Sqm

code1362 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 362.03 Sqm

code1363 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific... 431.70 m

code1364 Providing and fixing suitable Plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ... 308.70 m

code1365 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm... 212.48 Sqm

code1366 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d... 33.07 Sqm

code1367 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c... 15.01 Sqm

code1368 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 12.24 Sqm

code1369 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.... 216.00 Kg

code1370 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 1418.36 Sqm

code1371 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 362.03 Sqm

code1372 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi... 134.82 Sqm

code1373 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c... 36.00 Sqm

code1374 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,... 20.16 Sqm

code1375 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 134.82 Sqm

code1376 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur... 6.05 Cum

code1377 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 2.02 Cum

code1378 TERRACE FLOOR - TEACHING QUARTERS. Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges ... 2.27 Cum

code1379 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 6.48 Cum

code1380 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 1.17 Cum

code1381 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 2.35 Cum

code1382 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 0.64 Cum

code1383 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 12.75 Cum

code1384 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 3.10 Kg

code1385 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2... 169.79 Sqm

code1386 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi... 1.89 Sqm

code1387 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 1.73 Sqm

code1388 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 36.23 Kg

code1389 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 75.10 Sqm

code1390 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost o... 43.95 Sqm

code1391 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov... 289.95 Sqm

code1392 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 75.10 Sqm

code1393 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r... 289.95 Sqm

code1394 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ... 3.62 Sqm

code1395 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 3.62 Sqm

code1396 Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom... 323.90 Sqm

code1397 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ... 14.35 Cum

code1398 GROUND FLOOR PHE-Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings... 16.00 Per Mtr

code1399 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 38.00 Per Mtr

code1400 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 12.00 Per Mtr

code1401 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete (All traps ) 16.00 No

code1402 Providing and fixing 600x450 mm beveled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board ground fixed

to wooden cleats with C.P. brass screws and washers complet... 8.00 No

code1403 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 (for drinking water point,Sink, Wash Basin and Ewc ) 20.00 No

code1404 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g (for Iwc , bath, and utility ) 24.00 No

code1405 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with t... 8.00 No

code1406 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ... 4.00 No

code1407 Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,... 4.00 No

code1408 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 8.00 No

code1409 Providing and fixing PTMT extension nipple for water tank pipe, fittings

of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g 8.00 No

code1410 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go... 4.00 No

code1411 Providing and fixing Sink cock with swivel spout & wall flange, wall

mountable made of Stainless steel with all concealed fitting arrangements

& all necessary accesories complete - Class Economy 4.00 No

code1412 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 134.00 Per Mtr

code1413 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 13.00 Per Mtr

code1414 FIRST FLOOR-PHE-Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings ... 16.00 Per Mtr

code1415 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 35.00 Per Mtr

code1416 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 9.00 Per Mtr

code1417 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete (All traps ) 16.00 No

code1418 Providing and fixing 600x450 mm beveled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board ground fixed

to wooden cleats with C.P. brass screws and washers complet... 8.00 No

code1419 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 (for drinking water point, Sink, Wash Basin and Ewc) 20.00 No

code1420 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g (for Iwc , bath and washing ) 24.00 No

code1421 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with t... 8.00 No

code1422 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ... 4.00 No

code1423 Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,... 4.00 No

code1424 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 8.00 No

code1425 Providing and fixing PTMT extension nipple for water tank pipe, fittings

of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g 8.00 No

code1426 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go... 4.00 No

code1427 Providing and fixing Sink cock with swivel spout & wall flange, wall

mountable made of Stainless steel with all concealed fitting arrangements

& all necessary accesories complete - Class Economy 4.00 No

code1428 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 134.00 Per Mtr

code1429 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla... 13.00 Per Mtr

code1430 TERRACE FLOOR PHE-Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints comp... 84.00 Per Mtr

code1431 Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct... 84.00 Per Mtr

code1432 Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp... 2.00 Per Mtr

code1433 C.I. grating 180X180 mm 4.00 No

code1434 Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal e... 32.00 Per Mtr

code1435 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete(All traps ) 16.00 No

code1436 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 30.00 Per Mtr

code1437 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 95.00 Per Mtr

code1438 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 9.00 Per Mtr

code1439 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 38.00 Per Mtr

code1440 Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) :32 mm nominal bore 8.00 No

code1441 Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 50 mm nominal bore 1.00 No

code1442 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an... 5000.00 l

code1443 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv... 120.00 Kg

code1444 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 50.00 m

code1445 Open Conduit System.Supply Heavy gauge PVC conduit pipe --- dia -- mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in... 20.00 m

code1446 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 440.00 m

code1447 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 300.00 m

code1448 Concealed Conduit System.Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before con... 40.00 m

code1449 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 185.00 m

code1450 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 240.00 m

code1451 Supplying heavy gauge PVC conduit pipe --- mm dia -- thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fix... 55.00 m

code1452 Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/lconduit entry as required with one coat of primer of approved make etc.200x200x65 mm 8.00 Each

code1453 Supplying and fixing PVC/Metal conduit Deep Junction box.19/20mm deep Junction box 40.00 Each

code1454 Supplying and fixing PVC/Metal conduit Deep Junction box.25mm deep Junction box 3.00 Each

code1455 Supplying and fixing PVC/Metal conduit Deep Junction box.32mm deep Junction box 3.00 Each

code1456 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit in brick wall 10.00 m

code1457 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit CC floor 10.00 m

code1458 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 10.00 m

code1459 Supplying PVC/GI Flexible conduit pipe -- mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N... 10.00 m

code1460 Supplying and fixing of Metal Fan box with Round Hook. 36.00 No.

code1461 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 49.00 Point

code1462 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 44.00 Point

code1463 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 53.00 Point

code1464 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir... 55.00 Point

code1465 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 80.00 m

code1466 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 720.00 m

code1467 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 1600.00 m

code1468 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 1100.00 m

code1469 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 420.00 m

code1470 Supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor conforming to IS 8130-1984 and (Virgin) PVC Insulation sheathed suitable for work... 100.00 m

code1471 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.3... 94.00 Each

code1472 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.4... 32.00 Each

code1473 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.6... 32.00 Each

code1474 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.8... 24.00 Each

code1475 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1... 8.00 Each

code1476 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 94.00 Each

code1477 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 32.00 Each

code1478 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 32.00 Each

code1479 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 24.00 Each

code1480 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 8.00 Each

code1481 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch 289.00 Each

code1482 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps Two way Switch 8.00 Each

code1483 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps 3way socket 96.00 Each

code1484 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module. 24.00 Each

code1485 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps one way switch 64.00 Each

code1486 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Bell Push 8.00 Each

code1487 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socket 64.00 Each

code1488 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TV 8.00 Each

code1489 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. 1650.00 Sq CM

code1490 Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab. 166.00 Each

code1491 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Bakelite Ceiling Rose. 3.00 No.

code1492 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Pendant Holder 2.00 No.

code1493 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holder 156.00 No.

code1494 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 58.00 Each

code1495 Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap... 9.00 Each

code1496 Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.II - Double Door.16 way SP&N 9.00 Each

code1497 Supplying,fixing and wiring residual current circuit breaker (RCCB) 240v/450v upto 300mA sensitivity on exisitng wood panel board.16A-25A 2 pole 9.00 Each

code1498 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.120 Sqmm... 0.25 Km

code1499 Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No. 1.17.1) 9.00 cm

code1500 Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10) 9.00 cm

code1501 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.120 to 240 Sqmm 0.25 Km

code1502 Supplying and fiixing of Brass Cable Gland.25mm dia 14.00 Each

code1503 Supplying and fiixing of Brass Cable Gland.32mm dia 1.00 Each

code1504 Supplying and fiixing of Brass Cable Gland.40 mm dia 1.00 Each

code1505 GI Pipe, 100 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177) 10.00 m

code1506 Laying of GI Pipe 10.00 m

code1507 120 Sqmm Copper Terminal, Apprx Wt: 64 Gm 8.00 Each

code1508 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul... 8.00 No

code1509 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 8 SWG-GI Wire 140.00 m

code1510 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm GI strip 48.00 m

code1511 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz ... 64.00 Each

code1512 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz ... 94.00 Each

code1513 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has... 6.00 Each

code1514 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. 24.00 Each

code1515 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu... 24.00 Each

code1516 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire... 164.00 Each

code1517 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar... 24.00 Each

code1518 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w... 24.00 Each

code1519 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. 8.00 Each

code1520 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc... 4.00 No

code1521 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. 4.00 Each

code1522 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M... 4.00 Each

code1523 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,... 35000.00 Sq CM

code1524 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i... 3.00 m

code1525 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 3.00 m

code1526 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 3.00 m

code1527 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1528 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT 1.00 Each

code1529 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le... 1.00 Each

code1530 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo... 1.00 Each

code1531 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C 3.00 Each

code1532 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 3.00 Each

code1533 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 3.00 Each

code1534 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 10.00 Each

code1535 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers..32 A 9.00 Each

code1536 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. 9.00 Each

code1537 GROUND FLOOR-Supplying Installing, testing and commissioning of 19mm dia 40.0m

length hose with rubber lining smooth bore, reinforced of natural/synthetic

fibres, a rubber cover finishshall besmooth... 1.00 No

code1538 Supply, installation of 4kg Fire Extinguisher Mono Ammonium

PhosphatePowder 50, StoredPressure Type, Pressure Gauge, Gross

Weight 6.9Kg, emptyweight 2.9Kg, Can Height 440MM, Diameter

140MM, Dischar... 1.00 No

code1539 Supplyandinstallationof2KgC02 Gas Type Fire Extinugisher Squeeze

grip type, usedUnusedMechanism, SqueezeGrip,GrossWeight 9.1Kg.

emptyWeight 7.1Kg. CanHeight 595MMDiameter 108MM,Discharge

Time less ... 1.00 No

code1540 Providing and Fixing Fire force boardsize of 3'x2 'madeout to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials, labour,usage charge... 1.00 Per Mtr

code1541 FIRST FLOOR- Supplying Installing, testing and commissioning of 19mm dia 40.0m

length hose with rubber lining smooth bore, reinforced of natural/synthetic

fibres, a rubber cover finishshall besmooth... 1.00 No

code1542 Supply, installation of 4kg Fire Extinguisher Mono Ammonium

PhosphatePowder 50, StoredPressure Type, Pressure Gauge, Gross

Weight 6.9Kg, emptyweight 2.9Kg, Can Height 440MM, Diameter

140MM, Dischar... 1.00 No

code1543 Supplyandinstallationof2KgC02 Gas Type Fire Extinugisher Squeeze

grip type, usedUnusedMechanism, SqueezeGrip,GrossWeight 9.1Kg.

emptyWeight 7.1Kg. CanHeight 595MMDiameter 108MM,Discharge

Time less ... 1.00 No

code1544 Providing and Fixing Fire force boardsize of 3'x2 'madeout to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials, labour,usage charge... 1.00 Per Mtr

code1545 TERRACE- Supply, installation, testingand commissioning electrically driven Terrance

pump of capacity 450.0 Lpm at 35.0m Head bronze impeller pump coupled to

electrical driven moto rwith suitabl eHP... 1.00 No

code1546 Supplying, installing, testing & commissioning approved make heavyduty

(Class 'C') GIpipes and fittings confirming to IS1239 PI&II,Malleable

Specialssuchastees, longradiusbends,checknuts,unions, fla... 18.00 Per Mtr

code1547 Supplying ,installing, testing and commissioning of PN16CI butterfly valves

of confirming to IS13039 with necessary nuts & bolts etc .,complete----etc.,

complete as per specificaiton with all lead a... 2.00 No

code1548 Supplying installing, testingandcommissioningof PN16CI "NonReturn

Valve"confirmingtoIS13039withnecessaryboltsandnutsetccomplete

includes cost of allmaterials labour chargeswithall lead lift loadinga... 1.00 No

code1549 supply and installing testing and commissioning of CI " Y " stainer

confirming toISstandardwithnecessaryboltsandnutscomplete includes

costofallmaterials labourchargeswithall leadlift loadingandunloa... 1.00 No

code1550 Supplying Installing, testing and commissioning of Gun metal AIR

RELEASE VALVE SIZE OF 25mm dia in cluding costo fmaterials, labour,

usage charges of machinery complete as per specifications. Comp... 1.00 No

code1551 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an... 10000.00 l

code1552 OTHER INFRA - EXTERNAL WATER SUPPLY-Earth work excavation by manual means for drains,canals, waste weir,

draft, approach channels, key trenches, foundation of bridges and

such simillar works in all ... 968.00 Cum

code1553 Filling approved earth (excluding rock) in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm

in depth, consolidating each deposited layer by ramming and ... 968.00 Cum

code1554 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013

with latest amendments ended with integral sockets with ISI mark and

conveying to worksite, rolling and lowering into trenches, laying ... 310.00 Per Mtr

code1555 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013

with latest amendments ended with integral sockets with ISI mark and

conveying to worksite, rolling and lowering into trenches, laying ... 294.00 Per Mtr

code1556 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013

with latest amendments ended with integral sockets with ISI mark and

conveying to worksite, rolling and lowering into trenches, laying ... 72.00 Per Mtr

code1557 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013

with latest amendments ended with integral sockets with ISI mark and

conveying to worksite, rolling and lowering into trenches, laying ... 230.00 Per Mtr

code1558 Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013

with latest amendments ended with integral sockets with ISI mark and

conveying to worksite, rolling and lowering into trenches, laying t... 339.00 Per Mtr

code1559 Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013

with latest amendments ended with integral sockets with ISI mark and

conveying to worksite, rolling and lowering into trenches, laying t... 448.00 Per Mtr

code1560 Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013

with latest amendments ended with integral sockets with ISI mark and

conveying to worksite, rolling and lowering into trenches, laying t... 288.00 Per Mtr

code1561 Constructing brick masonry chamber of internal dimension 600x600mm

and depth of 600mm (inner dimensions) with modular bricks of CD 75

in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plast... 30.00 No

code1562 Constructing brick masonry chamber of internal dimension 450x450mm

and depth of 600mm (inner dimensions) with modular bricks of CD 75

in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plast... 18.00 No

code1563 Providing and fixing square-mouth S.W. gully trap class SP-1 complete

with C.I. grating brick masonry chamber 150 x 100 mm size P type With

Non Modular common burnt clay bricks of designation 3.5 & wi... 20.00 No

code1564 Constructing brick masonry chamber of internal dimension 600x600mm

and depth of 600mm (inner dimensions) with modular bricks of CD 75

in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plast... 73.00 No

code1565 Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da... 9.00 No

code1566 Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

with latest ammendments., in position for RCC walls including hoisting

and conveying them to work spot with all lead and lifts et... 6.00 No

code1567 Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

with latest ammendments., in position for RCC walls including hoisting

and conveying them to work spot with all lead and lifts et... 6.00 No

code1568 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe... 1110.00 Per Mtr

code1569 Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) :50 mm nominal bore 7.00 No

code1570 RCC pipe NP3 450 mm dia & 2.5 M long (SEWAGE ROAD CROSSING)) 18.00 Per Mtr

code1571 RCC pipe NP3 250 mm dia & 2 M long (PRM ROAD CROSSING) 18.00 Per Mtr

code1572 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g (for cloths washing ) 14.00 No

code1573 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 5 HP, size 50x40 Head 46M, Discharge 174 LPM5 HP,... 5.00 No

code1574 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap... 5.00 No

code1575 Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments. 5.00 No

code1576 RAIN WATER RECHARGE PITS-Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kind... 32.30 Cum

code1577 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi... 32.30 Cum

code1578 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) 64.90 Cum

code1579 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos lon... 133.00 Each

code1580 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha... 5.40 Cum

code1581 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all comple... 2.66 Cum

code1582 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engi... 2.66 Cum

code1583 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per di... 2.66 Cum

code1584 Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 @ 6kg/m2, slabs jointed in CM 1:3... 19.00 Sqm

code1585 Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted woo... 100.00 m

code1586 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work... 300.00 m

code1587 Fabricating, supplying and erecting swaged tubular pole of height …Mtr having three sections, and providing twocoats of red oxide paint and finished with two coats of enamelled paint of approved qua... 12.00 No

code1588 Supplying and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel boaard using necessary bolts,nuts, washers and wiring etc., completee with ac-3 rating and as per IS-13947 40 ... 1.00 No

code1589 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ... 1.00 No

code1590 Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. 1.00 No

code1591 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca... 22.00 No

code1592 Fabrication, Supplying, Erection, Testing and Commissioning of 12 Mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) ... 2.00 Each

code1593 Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street... 8.00 Each

code1594 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work... 200.00 m

code1595 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M... 8.00 Each

code1596 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M... 12.00 Each

code1597 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. 30.00 Each

code1598 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.16 Sqmm,... 0.49 Km

code1599 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.25 Sqmm,... 0.60 Km

code1600 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.2.5 sqmm to 25 sqmm 1.09 Km

code1601 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.25 Sqmm Copper Terminal, Apprx Wt: 11 Gm 120.00 Each

code1602 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul... 6.00 No

code1603 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip 30.00 m

code1604 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin... 12.00 Cum

code1605  Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I... 0.05 Cum

code1606 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe... 0.65 Cum

code1607 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 0.03 Tonne

code1608  Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour... 5.76 Sqm

code1609 Supply of DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL (Including Cost of Poles). 2.00 Set

code1610 fixing of DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL (Including Cost of Poles). 2.00 Set

code1611 Supply of 11 kV, 45 KN Polymeric Insulator. 12.00 No

code1612 Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials. 4.00 No

code1613 Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials. 4.00 No

code1614 Supply of Guy Wire & GI Wire as per IS-2141.7/10 SWG Guy Wire(7/3.251 mm Dia), Std Wt: 680 Kg/KM. 0.04 MT

code1615 Digging of Pit for GUY SET.Ordinary Soil. 4.00 Per Pit

code1616 supply of Spiral Earth Electrode. 4.00 No

code1617 Providing Spiral Earth Electrode type earthing. 4.00 No

code1618 Supply of Caution/Danger Board. 4.00 No

code1619 fixing of Caution/Danger Board. 2.00 No

code1620 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire). 4.00 Each

code1621 fixing of Anti Climbing Device (12 Mtr GI Barbed Wire). 4.00 Each

code1622 Supply of 11 kV, 400 Amps Double Break GOS(Dwg No. BESCOM/GM/QS&S/22 Dtd 24.11.2018). 2.00 Set

code1623 Fixing of GOS including wiring (11 kV Double Break 400 Amps). 2.00 Set

code1624 Supply of H-Frame for mounting. 2.00 No

code1625 Erection of H-Frame.for mounting GOS. 2.00 No

code1626 Supply of 11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification.Set/3

code1627 Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring.Set/3

code1628 Supply of Rabbit ACSR Conductor. 0.05 Km

code1629 Laying of Rabbit ACSR Conductor. 0.05 Km

code1630 Supply of PG Clamps for Rabbit Conductor. 6.00 Km

code1631 Supply of 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.... 0.20 Km

code1632 Supply of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable.3Cx95sqmm indoor. 8.00 Kit

code1633 Supply of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3Cx95sqmm outdoor. 10.00 Kit

code1634 Supply of Cable covering tiles 250x125x40mm.. 0.30 Per Thousand

code1635 Supply of Artificial/Manufacture Sand (Extracted from Vol-1, PWD SR Sl No. 62) 12.00 cm

code1636 Supply of RCC humepipes 2000mm long 150mm dia. 20.00 No

code1637 Supply of Collars for RCC hume pipes. 20.00 No

code1638 Supply of GI Pipe, 100 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177 40.00 m

code1639 Supply of Route and Joint indicating stones with MS Anchor rod. 5.00 No

code1640 Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No. 1.17.1) 42.00 cm

code1641 Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10) 42.00 cm

code1642 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.3x95 to 150 Sqmm. 0.20 Km

code1643 Retailing the cable trenches with selected availble earth from trench excavation including watering,Consolidation in layers of 15Cm thickness including depositing of the surplus earth with a lead of 2... 42.00 cm

code1644 Making and Fixing pot head for HT Cable only.Heat shrinkable Type Terminations.3x95 to 3x150 Sqmm. 12.00 No

code1645 Covering the cables with tiles. 0.20 Km

code1646 Spreading and forming with sand alround the cable to a depth of 75mm and width of 500mm . 0.12 Km

code1647 Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete.RCC Pipe.. 40.00 m

code1648 Fixing of Route Joint Indicating Slab.. 5.00 No

code1649 Supply of 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wir... 1.00 No

code1650 Conventional RMU (VCB Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC-

62271/IS-3427.One Breaker (VL) Panel with Copper Busbar. 1.00 Unit

code1651 Erection of HT metering Cubicle on Platform. 1.00 No

code1652 Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ... 2.00 No

code1653 Earth work excavation for Foundation by mechanical means for all kinds of soil & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, ca... 12.96 Cum

code1654 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes... 1.30 Cum

code1655 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).1 no(1.5*1.5*1)-2.48 9.92 Cum

code1656 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T... 0.92 Cum

code1657 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin- ing, including cost of materials, labour, curing as per... 21.60 Sqm

code1658 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov... 11.40 Sqm

code1659 Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014.21. 250 kVA, Aluminium Wdg, Star 2 (5 Star).CABLE ENTRY TYPE with buchholz relay,marshalling bo... 1.00 No

code1660 Erection of 200 - 250 kVA Transformer 1.00 No

code1661 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 12.60 Cum

code1662 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes... 3.15 Cum

code1663 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).Foundation wall -((9+5)*2)*0.60*0.45-7.56 CUM,Basement-((9+5)*2)*0.45*0.45-5.67 CU... 13.23 Cum

code1664 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg... 1.89 Cum

code1665 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne... 37.80 Sqm

code1666 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 0.17 MT

code1667 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.... 418.80 Kg

code1668 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct... 50.40 Sqm

code1669 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for... 100.80 Sqm

code1670 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ... 12.00 No

code1671 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-Cu Wir... 100.00 m

code1672 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 50x6mm GI strip 100.00 m

code1673 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.40x6mm Copper strip 20.00 m

code1674 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.600x600x3mm Copper plate 2.00 Each

code1675 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,... 55000.00 Sq CM

code1676 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i... 4.00 m

code1677 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 6.00 m

code1678 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 6.00 m

code1679 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1680 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1681 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 3.00 Each

code1682 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT 1.00 Each

code1683 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le... 1.00 Each

code1684 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo... 1.00 Each

code1685 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 3.00 Each

code1686 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C 3.00 Each

code1687 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,... 225000.00 Sq CM

code1688 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i... 8.00 m

code1689 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 12.00 m

code1690 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 12.00 m

code1691 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 12.00 m

code1692 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 12.00 m

code1693 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 3.00 Each

code1694 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1695 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1696 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1697 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1698 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT 1.00 Each

code1699 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le... 1.00 Each

code1700 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo... 1.00 Each

code1701 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C 30.00 Each

code1702 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 6.00 Each

code1703 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 30.00 Each

code1704 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 1.00 Each

code1705 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 1.00 Each

code1706 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 3.00 Each

code1707 Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standard... 1.00 Each

code1708 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,... 125000.00 Sq CM

code1709 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i... 6.00 m

code1710 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 12.00 m

code1711 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 12.00 m

code1712 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O... 1.00 Each

code1713 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 8.00 Each

code1714 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 18.00 Each

code1715 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT 1.00 Each

code1716 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le... 1.00 Each

code1717 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo... 1.00 Each

code1718 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 1.00 Each

code1719 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C 18.00 Each

code1720 Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power ... 1.00 Each

code1721 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery.1KVAR. 75.00 Each

code1722 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947..25 A 8.00 Each

code1723 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,... 265000.00 Sq CM

code1724 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i... 12.00 m

code1725 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 12.00 m

code1726 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 12.00 m

code1727 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 12.00 m

code1728 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 12.00 m

code1729 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 2.00 Each

code1730 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1731 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 2.00 Each

code1732 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 2.00 Each

code1733 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1734 Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. (Open Execution).400 A 1.00 Each

code1735 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT 2.00 Each

code1736 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le... 2.00 Each

code1737 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo... 2.00 Each

code1738 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C 39.00 Each

code1739 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 6.00 Each

code1740 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 39.00 Each

code1741 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 1.00 Each

code1742 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 2.00 Each

code1743 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 3.00 Each

code1744 Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standard... 1.00 Each

code1745 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,... 25000.00 Sq CM

code1746 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i... 3.00 m

code1747 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 4.00 m

code1748 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 4.00 m

code1749 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each

code1750 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT 1.00 Each

code1751 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le... 1.00 Each

code1752 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo... 1.00 Each

code1753 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C 15.00 Each

code1754 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 6.00 Each

code1755 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 3.00 Each

code1756 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 1.00 Each

code1757 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 1.00 Each

code1758 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 1.00 Each

code1759 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.16 Sqmm,... 0.15 Km

code1760 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.25 Sqmm,... 0.10 Km

code1761 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.70 Sqmm,... 0.30 Km

code1762 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.95 Sqmm,... 0.10 Km

code1763 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.150 Sqmm... 0.25 Km

code1764 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.185 Sqmm... 0.15 Km

code1765 Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No. 1.17.1) 252.00 cm

code1766 Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10) 252.00 cm

code1767 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.2.5 sqmm to 25 sqmm 0.25 Km

code1768 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.35 sqmm to 95 sqmm 0.40 Km

code1769 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.120 to 240 Sqmm 0.40 Km

code1770 Supplying and fiixing of Brass Cable Gland.25mm dia 20.00 Each

code1771 Supplying and fiixing of Brass Cable Gland.32mm dia 20.00 Each

code1772 Supplying and fiixing of Brass Cable Gland.40 mm dia 15.00 Each

code1773 Supplying and fiixing of Brass Cable Gland.45 mm 10.00 Each

code1774 GI Pipe, 100 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177) 50.00 m

code1775 Laying of GI Pipe 50.00 m

code1776 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.25 Sqmm Copper Terminal, Apprx Wt: 11 Gm 32.00 Each

code1777 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.70 Sqmm Copper Terminal, Apprx Wt: 38 Gm 32.00 Each

code1778 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.95 Sqmm Copper Terminal, Apprx Wt: 58 Gm 16.00 Each

code1779 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.150 Sqmm Copper Terminal, Apprx Wt: 98 Gm 32.00 Each

code1780 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.185 Sqmm Copper Terminal, Apprx Wt: 158 Gm 40.00 Each

code1781 Supply of RCC Hume Pipe, 2000 mm Long, 150 mm Dia 250.00 No

code1782 Laying of RCC Hume Pipe, 2000 mm Long, 150 mm Dia 500.00 m

code1783 Supply of Collars for RCC Hume Pipe 250.00 No

code1784 Supply of Route and Joint indicating stones with MS Anchor rod. 100.00 No

code1785 Fixing of Route Joint Indicating Slab.. 100.00 No

code1786 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500X700 mm internal ... 18.00 1 chamber

code1787 Extra for depth beyond 45 cm of brick masonry chamber : For 500x700

mm size With common burnt clay (non modular) bricks of class

designation 3.5 18.00 1 chamber/ m

code1788 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 150.00 m

code1789 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 200.00 m

code1790 Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS... 300.00 m

code1793 Supplying installing testing & commissioning of PRIME Diesel Generator set with following specs. Power rating as per standard reference condition as per-BS 5514/ISO 3046 /ISO 8528 & IS 1002/ISO 3046 ... 1.00 Set

code1794 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ... 4.00 No

code1795 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x6mm GI strip 12.00 m

code1796 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.40x6mm Copper strip 12.00 m

code1797 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.600x600x3mm Copper plate 2.00 Each

code1798 BITUMINOUS ROAD. Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal ... 24.60 Sqm

code1799 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and ... 738.00 Cum

code1800 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 590.40 Cum

code1801 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 147.60 Cum

code1802 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) 295.20 Cum

code1803 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ... 639.00 Cum

code1804 Compacting original ground supporting embankment-Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of ... 270.00 Cum