Loading…
Loading…
Tender Value
₹5.6 Cr
EMD Value
₹11.3 L
Closing Date
17 Jul 2026, 3:00 pm
Similar tender results from the same govt authority in the past 3 years.
Construction of FOB at Tatisilwai and Construction of PF shed at Ranchi and Tatisilwai.
DRMENGGRNC-42-2026
DRMENGGRNC-42-2026
Open
12 Months
Ranchi, Jharkhand
₹0
₹11.3 L
24 Jun 2026
24 Jun 2026
3 Jul 2026
slips up to date.
Item- 1 Please see Item Breakup for details.
S No. Item Description of Item Unit Qty Rate Amount
RANCHI DIVISION-ENGG/SOUTH EASTERN RLY
Earthwork in excavation by mechanical
means (Hydraulic Excavator)/Manual Means
for foundations and floors of the bridges,
retaining walls etc. including setting out,
dressing of sides, ramming of bottom, getting
out the excavated material, back filling in
layers with approved material and
consolidation of the layers by ramming and
watering etc. including all lift, disposal of
surplus soil up to a lead of 300m, all types of
shoring and strutting with all labour and
material complete as per drawing and
technical specification as directed by
Engineer in charge. Note: This item will be
used for excavation work in connection with
other miscellaneous works also like side
drains, foundation for OHE masts and other
miscellaneous structures in connection with
Gauge Conversion, Doubling, New lines.
Providing and laying in position Plain cement
concrete of specified Nominal Mix for
miscellaneous works like side drains,
foundation for OHE masts and other
miscellaneous structures excluding the cost
of Cement, centering and shuttering - All
work up to plinth level :
graded stone aggregate 20 mm nominal size)
4 022040 Providing and laying in position machine cum 355.00 2618.75 929656.25
batched, machine mixed and machine
vibrated Cement Concrete of specified grade
as per approved Design Mix (mixed in Mobile
Concrete Batching/Mixing Plant at site or
RMC from approved plants) using 20mm
graded crushed stone aggregate and coarse
sand of approved quality in RCC raft
foundation & Pile cap including finishing,
using Plasticiser in approved proportions (as
per IS:9103), to modify workability without
impairing strength and durability complete as
p e r specifications and direction of the
Engineer in charge. N o t e : 1. Payment for
cement, reinforcement and shuttering shall
be made extra under relevant item. 2.
Plasticiser shall invariably be used in
approved proportion to increase workability
with minimum possible quantity of cement
for all grade of Design Mix Concrete unless it
is specifically approved citing reasons for not
using plasticiser at the stage of Mix Design
and in that case deduction shall be made as
per relevant item.
Centering and shuttering including strutting,
propping etc. and removal of form for :
5 025031 All types of bridge sub-structures, e.g. pier, Sqm 435.00 674.52 293416.20
abutment, wing wall, retaining wall, RCC box
type foundations, Abutment cap, Pier Cap,
Inspection Platform & Pedestal over Pier cap,
Fender wall, Diaphragm wall etc. up to 5m
above ground level
6 025032 All types of bridge super-structures, e.g. Sqm 290.00 854.92 247926.80
slabs, I-girders, T-girders, Box girders etc. up
to 5m above ground level.
RANCHI DIVISION-ENGG/SOUTH EASTERN RLY
7 025033 Extra for additional height over item no. Sqm 400.00 102.08 40832.00
025031 & 025032 wherever required with
adequate bracing, propping etc. over initial
height of 5 metres for every additional height
of 1 metre or part thereof.
Supply and using Cement at Worksite
8 025073 Pozzolana Portland Cement approved MT 184.00 8429.01 1550937.84
Supply of steel reinforcement of approved
brands/makes for R.C.C. work including
straightening, cutting, bending, placing in
position and binding all complete.
9 025082 Thermo-Mechanically Treated bars of grade Kg 55800.00 97.13 5419854.00
Fe-500D or more of approved brands/makes.
Providing and laying in position machine
batched, machine mixed and machine
vibrated Cement Concrete of specified grade
as per approved Design Mix (mixed in Mobile
Concrete Batching/Mixing Plant at site or
RMC from approved plants) using 20mm
graded crushed stone aggregate and coarse
sand of approved quality for cast in-situ
Prestressed (Post-tensioned) concrete girder /
Box girders/Slabs for different spans
including finishing, using Plasticiser in
approved proportions (as per IS:9103), to
modify workability without impairing strength
and durability complete as per drawings,
specifications and direction of the Engineer
in-charge. Note: 1. Payment for Staging,
Shuttering, Cement, reinforcement, HTS
cables, sheathing, anchorage cones,
stressing of cables and grouting of the ducts
shall be made extra under relevant items. 2.
Plasticiser shall invariably be used in
approved proportion to increase workability
with minimum possible quantity of cement
for all grade of Design Mix Concrete unless it
is specifically approved citing reasons at the
stage of Mix Design and in that case
deduction shall be made as per relevant
10 031011 With Soffit level up to 9m above Bed level cum 52.00 2739.46 142451.92
031030 for casting of slab in place of Girder
RANCHI DIVISION-ENGG/SOUTH EASTERN RLY
Supplying, fabrication, assembling of all
types of steel girders of specified spans with
structural steel conforming to Quality "B0"
Grade Designation E250 conforming to
IS:2062, erection / slewing / end launching of
steel girders with cranes or any other
approved launching methods as per site
conditions (not requiring traffic block) on sub-
structure including provision of trolley
refuges etc., complete as per approved QAP
and drawings conforming to IRS-B1-2001 and
other relevant codes and specifications. Note:
1. Detailed fabrication and erection drawings
& launching methodology will be prepared by
the contractor and got approved from
Railway. 2. The rate is all inclusive including
launching in position, complete in all respect
except cost of (i) Painting / Metalising; (ii)
Bearings & (iii) HSFG bolts which shall be
paid extra under relevant item. 3. The
payment shall be made on the theoretical
weight of main components and gusset
plates only. 4. Payment Schedule: (i) Receipt
of material at site: 40% (ii) Fabrication of
girders: 20% (iii) Erection/Launching: 20%
(iv) Completion in all respects: 20%
12 041011 Plate Girder/Semi Through Girder/Composite MT 45.00 127282.14 5727696.30
Girder (Steel Work)
13 041020 Supplying and fixing HSFG bolts of any dia Kg 1600.00 199.91 319856.00
and any length with suitable nuts including
DTI washers conforming to IRS-B1-2001 for
bridges and steel structures with contractors
labour, tools and plants and lead and lift etc.,
Metallizing of steel work of girders with
sprayed aluminium after surface preparation
by Sand/grit blasting, followed by one coat of
etch primer (IS:5666) & one coat of Zinc
Chrome primer (IS:104) and two coats of
aluminium paint (IS:2339) with all labour,
T&P and material as a complete job duly
conforming to all relevant specifications and
process given under Clause 39 of IRS-B1-
2001. Note: Nominal Thickness of sprayed
Aluminium coating shall be 150 microns. DFT
of Zinc chrome primer shall be 25-30 microns
and DFT of each coat of Aluminium paint shall
be 12-14 microns.
Providing and fixing various size HTS holding
down bolts conforming to relevant
Codes/Specification in concrete column or in
other structures with proper nuts, bolts,
washers/plates, grouting of holes with
cement or epoxy concrete with all material,
labour, T&P as a complete job.
15 041071 With Cement Grout. Cost of cement shall be Kg 1170.00 122.53 143360.10
RANCHI DIVISION-ENGG/SOUTH EASTERN RLY
16 041370 Supplying fabricating and erecting welded MT 29.00 114366.59 3316631.11
and/or bolted and/or riveted steel work in
built up sections, trusses and framed work,
staging, racks, Height Gauge etc. for Steel
Structures other than bridge girders, using
RSJ, tees, angles and channels/flats, plates,
gussets, round or square bars, cleats, bolts
etc., with contractors own steel including
cutting, bending, straightening, drilling,
riveting, hoisting, fixing, erecting, welding,
bolting etc., with Providing stiffeners
wherever required as per approved drawing
including applying a priming coat of a
approved steel primer with all contractor's
materials, labour, tools & plants, lead & lift
including crossing of tracks if required etc.,
complete as per specification and as directed
by Engineer-in-charge. Note: The payment
shall be made on the theoretical weight of
main components and gusset plates only.
17 052040 Supply and laying of coarse sand including cum 90.00 973.10 87579.00
consolidation with all labour, lead, lift, tools,
plants, crossing of tracks as per drawing and
technical specification as directed by the
Engineer in charge in case loose slush is
encountered at site of foundation before
casting the foundation or laying the filtering
Schedule Schedule C-Execution of all works as per NS Items (Special Items)
Item- 1 Please see Item Breakup for details.
S No. Item Description of Item Unit Qty Rate Amount
1 1 Manufacturing , Testing,fitting , fixing and Each 1260.00 209.38 263818.80
welding with stud guns etc. of normal headed
shear studs/shear.
Item Breakup - A-Execution of all Works of CPWD DSR 2023-Ver-1 with all correction slips up to date.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
PG Format - Engg Ranchi New - Update
ATTACHMENT
GCCACS11_CompressPdf.pdf
ATTACHMENT
BidSecurity-BGformat.pdf
ATTACHMENT
SPECIALCONDITIONSOFFOBs.pdf SPECIAL CONDITIONS OF FOBs
ATTACHMENT
ANNEXURE-VA.pdf
ATTACHMENT
GCC-2022-ACS10UpdatedC.pdf
ATTACHMENT
TelecomCircular9-2023-New.pdf Telecom Circular 9-2023-New
ATTACHMENT
Letter of Credit
ATTACHMENT
SpecialconditionofFOB.pdf
ATTACHMENT
BS-140.pdf
ATTACHMENT
BS-110R.pdf
ATTACHMENT
2018_CE-I_CT_9Date04_06_2018.pdf
ATTACHMENT
TelecomCircular9-2023-New.pdf
ATTACHMENT
SPECIALCONDITIONSOFFOBs.pdf
ATTACHMENT
PGFormat-Engg.RanchiNew-21.11.2025.pdf
ATTACHMENT
Download all tender documents and submit your bid