GE (N) P/TOKEN- 64 OF 2025-2026 DAY TO DAY MAINT WORKS AND CONNECTING REPAIRS OF MISC NATURE AT VISWAMITRA MARG, VICTORIA ROAD AND VARIOUS UNITS IN THE AREA OF AGE B/R (EAST) UNDER GE (N) PUNE

Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified and as directed.

S&F in repairs brass spindle of 15mm size any type and in any position complete all as specified and as directed.

S&F in repair PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning exc. 250 & n. exc. 500 litres capacity of tank complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning exc. 500 & n. exc. 1000 litres capacity of tank complete all as specified and as directed.

S&F in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 210gms)

S&F in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 142gms)

S&Fin rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete incl dismantling existing water tank all as specified and directed.

-Ditto- all as per srl item No 08 here in before but 1000ltr capacity complete all as specified and directed

S&F 15mm bore tubes med grade galvanized ISI marked with all fittings in short length and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and as directed

All as per Srl item No 10 here-in-before, but taking down and fixing only

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings in short length and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and as directed

All as per Srl item No 12 here-in-before, but taking down and fixing only

S&F 25mm bore tubes medium grade galvanized ISI marked with all fittings in short length and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and as directed

M&L cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and as directed

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including P-trap (PVC) 100 mm dia., connection to flushing pipe, anti-syphonage pipe complete incl making good to floor complete all as specified and as directed

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white including trap, connection to drain (outgoing pipe) and to flushing pipe, anti-syphonage pipe, including PVC jet for Pedestal pattern pan including 450/600mm long PVC connection including PTMT nuts and plastic water closet seat of white in colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white of bowl size 550mm x 440mm including waste coupling and PVC waste pipe 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy type for 15 mm bore pipe, including M S brackets complete all as specified and as directed.

S&F in repair vitreous china Urinal, Half stall type, white including waste pipe and CP brass spreader for fixing with 15 mm dia pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and incl 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and as directed.

S&F in repair PVC connection 15mm bore size with two nuts and washers of PTMT, of length 450mm complete all as specified and as directed

S&F in repair PVC connection 15mm bore size with two nuts and washers of PTMT of length 600mm complete all as specified and as directed

S&F in reapir Cabinet mirror plastic body for toilet of size 400x500mm with 4mm thick looking mirror complete all as specified and as directed.

S&F in repair for stainless steel sink made of Stainless Steel, 1mm thick with drainage board made of 1mm thick sheet, with plug, washers and waste coupling, 32mm dia. waste pipe, CP grating incl bedding in cement mortar to dwarf wall or cast iron cantilever brackets and connecting union to pipe, over all size 915 mm x 460 mm with bowl size 410mm X 330mm X 200mm complete all as specified and directed. Note: Overall size of sink/ bowl may vary upto + 5% but depth of bowl shall not be less than 200mm.

S&F in repair sinks made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 200mm complete all as specified and directed. Note: Overall size of sink/ bowl may vary upto + 5% but depth of bowl shall not be less than 200mm.

S&F in replacement stainless steel plate rack of size 24" X 36" X 10" complete all as specified and as directed.

S&F in replacement stainless steel plate rack of size 31" X 36" X 10" complete all as specified and as directed.

S&F in repair for glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and as directed.

S&F in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

S&F in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs stainless steel peg set of five pegs, fixed/welded/soldered on stainless steel base plate of size 300mmx30mmx2.5 mm and fixed with stainless steel screws, rowel plugs as per the sample approved by the Engineer-in-charge complete all as specified and directed.

S&F in repair for hand shower, chromium plated (health faucet) of ABC body with 8mm dia 1.2 metres long spirochrome flex tube and wall hook all as per Cat No. ALD-587 of make Jaquar or equivalent as approved by GE complete all as specified and as directed.

S&F in repair brass chromium plated soap dish , fixed to wall with CP brass screws all as specified and directed. Make: Johnson Cat part No: T3252C Fusion series or equivalent of Makes as per Appx A as approved by GE

S&F in repairs brass chromium plated towel rail including built in side brackets complete all as specified and as directed. Make: Johnson Cat No.T1350C Delta Series or equivalent of Make as per Appx 'A' as approved by GE

S&F in repair Brass Chromium plated towel ring all as specified and directed. Make: Johnson Cat No.T1351C Delta Series or of equivalent make as per Appx 'A' as approved by GE

Supply and fix in repairs, chromium plated long body bib cock fancy type with wall flange 15mm dia complete all as specified and as directed. Make: Jaquar Cat No. CON-107KN ‘CONTINENTAL' series or or equivalent of Makes as per Appx A as approved by GE

S&F in repairs Pillar cock swan neck suitable for 15mm bore pipe long body fancy type brass CP with Capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and as directed. Make: Johnson Cat Part No T2804C Magna SERIES or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs U shaped sink cock suitable for 15mm bore pipe long body fancy type brass CP with with wall flange quarter turn complete all as specified and as directed. Make: Jaguar/Cera, As per Appx 'A' as approved by GE.

S&F in repairs brass chromium plated quarter turn pillar cock fancy type for 15mm bore pipe, complete all as specified and as directed. Make: Johnson Cat No. T4801C VIVA Series or equivalent of makes as per Appx 'A' as approved by GE.

S&F in repairs bib cock long nose suitable for 15mm bore pipe fancy type brass CP with, quarter turn screwed down for iron pipe or brass ferrule complete all as specified and as directed. Make: Johnson Cat Part No T4806 VIVA series or equivalent of Makes as per Appx A as approved by GE

S&F in repirs wall mixer 2 in 1, quarter turn with provision for over head shower with bend pipe on upper side connecting legs and wall Flanges brass chromium plated suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Johnson Cat Part No T4821C VIVA series or equivalent of Makes as per Appx A as approved by GE

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs central hole basin mixer brass chromium plated quarter turn with regular spout with popup waste system with 450mm long braided hoses suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No QQT-7169B Queens Series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair eco angle cock chromium plated cast copper alloy ISI marked with flange, high pressure screwed down complete all as specified and as directed. Make: Johnson Part No T3910C or equivalent of Makes as per Appx A as approved by GE

S&F in repairs Two Way (2 in 1) bib cock suitable for 15mm bore pipe fancy type brass CP with wall flange , quarter turn screwed down screwed for iron pipe or brass ferrule complete fixed in repair and complete all as specified and as directed. Make: Johnson Cat Part No T4808C VIVA SERIES or equivalent of Makes as per Appx A as approved by GE

S&F in repair cast copper alloy CP shower arm square 450mm long with wall flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat Part No S0001C1 or equivalent of Makes as per Appx A as approved by GE

S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints, fixing to steel pipe or union complete all as specified and as directed. Make Johnson Cat Part No S0006C or equivalent of Makes as per Appx A as approved by GE

S&F in repair Toilet paper holder of brass CP, all as specified and directed. Make: Johnson Cat part No: T3254C Fusion series or equivalent of Makes as per Appx A as approved by GE

S&F in repairs bib tap standard of PTMT any colour 15 mm bore minimum weight 90 gram ISI Marked.

S&F in repair for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 15mm bore, ISI marked complete all as specified and as directed.

S&F in repair for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore, ISI marked complete all as specified and as directed.

S&F in repairs 32 mm bore PVC flexible pipe for wash hand basin complete all as specified and as directed.

S&F in repairs waste fittings, brass,chromium plated for glazed ware sink/basin etc, size 32mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repairs waste fittings, brass,chromium plated for glazed ware sink/basin etc, size 40mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repair 100mm bore PVC (SWR) floor trap plain with stainless steel grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) floor trap plain with stainless steel grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and as directed.

S&F in repair grating round 75 mm size of stainless steel with/without hole complete all as specified and as directed.

S&F in repair grating round 100 mm size of stainless steel with/without hole complete all as specified and as directed.

Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm each and refixing in same opening including easing, adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete all as specified and as directed. (S&F of new builder's hardware if specially ordered shall be measured and paid for separately)

Taking down shutters of any description area exc exc 2 Sqm each and refixing in same opening including easing, adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete all as specified and as directed. (S&F of new builder's hardware if specially ordered shall be measured and paid for separately)

M&L for taking down steel gate area exc. 1.0 Sqm but not exc 2.5 Sqm each , any shape and in any position and repair holdfast, uplifting of steel gate, welding to required member, repair/greasing to roller, repair and repositioning of base rail, make in true position to revolve, including one coat of synthetic enamal paint complete all as specified and directed by Engr- in - Charge.

M&L for taking down steel gate area exc. 2.5 Sqm but not exc 5.0 Sqm each , any shape and in any position and repair holdfast, uplifting of steel gate, welding to required member, repair/ greasing to roller, repair and repositioning of base rail, make in true position to revolve, including one coat of synthetic enamal paint complete all as specified and directed by Engr- in - Charge.

S&F in 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames complete all as specified and as directed.

All as per item No 64 above but figured glass complete all as specified and as directed.

S&F in repair aluminium powder coated door seal up to 1200mm length best quality complete complete all as specified and as directed.

S&F in repairs 150mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chokhats as required and as specified.

S&F in repair 0.56mm thick plain aluminium sheeting to doors, straight flashings with aluminium screws complete all as specified and as directed.

S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.4mm & fixed with stainless steel wire staples all as specified & directed.

S&F in repair stainless steel butt hinges 100mm complete all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as directed and specified.

S&F in repair for floor door stopper of brass body and tongue not less than 100mm long, anodised with hard drawn steel spring all as specified and as directed.

S&F in repair for floor door stopper of Stainless steel body and tongue not less than 100 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified.

S&F in repair drapery curtain rod of stainless steel 20mm dia. complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete complete all as specified and as directed.

M&L for repair to Aluminium door/windows of any description, of area exc 1.0 Sqm but n.exc 2.0sqm each taking off from present position and refixing in the same position after tightening easing the section as required, incl fitting the rubber packing aluminium snap beading, re-setting floor/hydraulic spring etc all as specified .

M&L for repair to Aluminium door/windows of any description, of area exc. 2 Sqm each taking off from present position and refixing in the same position after tightening, easing the section as required, including fitting the rubber packing aluminium snap beading, re-setting floor/hydraulic spring etc all as specified .

M&L for powder coated aluminium anodized sections for partition wall/frame with one or more rebates glazed fixed or sliding consisting of various aluminium sections of appropriate weights as specified and directed, including glazing clips, suitable Nylon gasket, etc complete all as specified and as directed.

S&F fully glazed single/double leaf openable door, using aluminium powder coated sections on door floor spring, pivots, with 5 mm thick glass in panels fixed with aluminium glazing clips section No. 19381 and 19352 and PVC rubber beading all around including with 1” interlock and handle, two lever door lock, sliding wheel etc sections as given below and all as specified and directed by Engineer-in-Charge.Top-19528, Middle – 19575, Bottom – 19530, Vertical – 19526, 1” Interlock (20939), 1” Handle (20602)

Supply and fixing in repairs Door closer hydraulically regulated designation No-2 universal type ISI marked suitable for door shutter of weight between 36 to 60 kg, cast iron body complete and complete all as specified and as directed. Make : Heera/Ashokas/Universal

S&F 5.50mm thick tinted glass area exc 0.50 Sqm including rubber beading for securing sheet glass in aluminium frame work complete all as specified and as directed.

S&F 12mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with glazing clips etccomplete all as directed .

S&F 4mm thick fiqured sheet glass quality and glazing with oil putty/rubber beading in square not exc. 0.50 Sqm in each pane fixed in window shutters complete all as specified and as directed.

S&F in repairs, double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified complete including taking down aluminium door shutter and refixing complete all as specified and as directed.

S&F in repair dead lock, vertical type 4 lever size 65 mm mild steel body with duplicate keys including key hole with fixing bracket complete all as specified and as directed.

S&F in repair mild steel body lock, vertical type, for cup board 65mm size Grade-I, 4 levers with duplicate keys including key hole with fixing bracket complete all as specified and as directed.

S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete all as specified and as directed.

S&F 5.0mm thick glass fixed with rubber packing aluminium snap beading and metal pins in skelton shutters of doors and windows including solar control film 25 micron reflective type stick to glass panes as per manufacturer's instructions including hacking out old broken glass from frames complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) including demolition of existing brick work built in CM complete all as specified and as directed.

All as above item No 91 here in but except bricks.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water incl necessary scaffolding etc complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of exterior emulsion weather proof paint over a coat of primer including preparation of new surface complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:6 on bricks or concrete surfaces finishing the surfaces even and fair and provision of sagol finish with two coats of oil bound distemper of any tint over a coat of alkali resistant primer including preparation of new surface complete all as specified and as directed.

M&L for 15mm thick rendering on faces of brick work or concrete surfaces in CM (1:6) finished even and fair and provision of sagol finish including taking down existing plaster and two coats of oil bound distemper of any tint over a coat of alkali resistant primer including preparation of new surface all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on bricks work or concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster and two coats of exterior emulsion weather proof paint paint over a coat of primer including preparation of new surface complete all as specified and as directed.

M&L for 15mm thick rendering on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, in cement mortar (1:6) finished even and fair and provision of sagol finish including taking down existing plaster and two coats of oil bound distemper of any tint over a coat of alkali resistant primer including preparation of new surface all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, finishing the surfaces even and smooth without using extra cement including taking down existing plaster and two coats of exterior emulsion weather proof paint paint over a coat of primer including preparation of new surface complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, 75mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete.

M&L for 40mm thick cement concrete 1:2:4 type B-2 (using 20mm graded stone aggregate) as in floor, finished even and smooth without using extra cement, including demolition of existing cement concrete.

S&F glass dividing strips 3mm thick, 38mm wide and inserted in position to conform to design complete all as specified & directed.

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc exc. 0.06 sqm but n.exc. 0.09 sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding of layer in CM 1:6 and demolition of existing tiles of any description complete all as specified and as directed.

M&L coloured vitrified double charged tiles 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 and demolition of existing tiles of any description complete all as specified and as directed.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 and demolition of existing tiles of any description complete, complete all as specified and as directed.

M&L for machine cut cudappah stone slab 20-25 mm thick as in lintels, shelves, vertical surface, fixed with neat cement slurry mixed with pigment to match the shade of the slab or arldite, including rubbing and polishing and demolition of existing stone of any description complete all as specified and as directed

Material and labour for 18-20 mm thick telephonic black granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl demolition of existing stone of any description complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed.

Material and labour for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved.

M&L for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock

S&F in repair Stainless steel Hasp and staple, safety type of 100 mm long including bolt to hinge plate and fixed with Self Tapping screws complete all as specified and as directed

S&F in repair, 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished complete all as specified and as directed

S&F in repairs for Garware Sun Control polyster film, 50 micron, reflective type fixed on existing glass panels complete all as specified and as directed.

Removing excavated soil, debrises obtained from demolition from various locations (other than this work) from site to outside MOD land complete all as as directed. The location at out side MOD land for disposal shall be located by the contractor himself).

S & F 18 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work fitting of shutters as approved by GE shall be fixed suitable for cup board etc. including taking down with existing one complete all as specified and directed.

S & F 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work fitting of shutters as approved by GE shall be fixed suitable for cup board etc. including taking down with existing one complete all as specified and directed.

S & F Stainless steel W hinges ISI marked 75 x 18 x 18mm, to cupboards complete all as specified & directed.

S&F 6mm thick Teak wood lipping for plywood cupboard of 12mm thick shutters complete all as specified and as directed

S&F 6mm thick Teak wood lipping for plywood cupboard of 18mm thick shutters complete all as specified & directed.

S&F 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified & directed.

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified & directed.

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed

S&F in repairs 50mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed

S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and as directed

S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and as directed

S&F in repairs PVC (SWR) bends of any radius of 50mm bore complete all as specified and as directed

S&F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and as directed.

S&F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed.

S&F in repair for PVC (SWR) junction single (single 'T') equal or unequal for 110 mm bore pipes with access door complete all as specified and as directed.

S&F in repair for PVC (SWR) junction single (single 'T') equal or unequal for 75mm bore pipes with access door complete all as specified and as directed.

M&L for coloured, textured design heavy duty exterior tiles of size 300mm x 300mm x10 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) and demolition of existing tiles of any description complete all as specified and as directed. Make: Johnsun Endura textured design or equivalent of Kajaria/ Somani as approved by GE.

M&L for designer coloured glossy rubber moulded chequered cement concrete tiles of size 30cmx30cmx25 to 27mm thick in floor, set, jointed and pointed in neat cement slurry with grey cement and pigment over and including 20mm thick screed bed in CM (1:6) including dismantling of existing tiles of any description laid in cement mortar complete all as specified and as directed.

M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

Dismantling existing interlocking paver blocks, removing rubbish off the premises and laying the same tiles/ blocks on existing places with repair of existing PCC for 60mm thick tile, in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile complete all as specified and as directed.

S&F in repairs plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/ semi pedestal pattern WC (anglo India type) complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in fdns, filling, sub base and mass concrete etc. incl dismantling existing concrete complete all as specified and as directed.

M&L in repair for 2nd class HW plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc 3 and n.exc 6 sq.cm incl two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for running welding in repairs for metal to be welded not exc. 6mm thick complete all as specified and as directed.

M&L for running welding in repairs for metal to be welded exc. 6mm not exc. 9mm thick complete all as specified and as directed.

M&L for welding in repairs n. exc 2.5cm in length and thickness of metal to be welded not exc. 6mm complete all as specified and as directed.

M&L for welding in repairs n. exc 2.5cm in length and thickness of metal to be welded exc. 6mm but n exc 9mm complete all as specified and as directed.

M&L for welding in repairs exc 2.5cm but n. exc. 5 cm in length and thickness of metal to be welded n. exc. 6mm complete all as specified and as directed.

S&F in repair 2mm thick fibre glass reinforced translucent corrugated or plain sheeting with corrugation side lap fixed with coach screw and washers in roof or wall etc complete all as specified and directed.

S&F for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 including dismantling existing steel complete all as specified and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.