PROVN OF AREA DRAINAGE JCOS ORS ACCN MILIT GIRINAGAR AND CERTAIN MINOR WORKS AT MILIT GIRINAGAR PUNE 25

Amount

Excavation in trenches not exc 1.50mtr wide and not exc 1.50mtr in depth for foundation etc and getting out in any type of soil complete all as specified and as directed.

M&L for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stine agg) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete all as specified and as directed.

M&L for cement concreate 1:3:6 type C1, using 20mm graded stone aggregate as in coping for drain work and similar works including necessary form work and finishes the surfaces even without using extra cement complete all as specified and as directed.

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in surface channels,drains, complete all as specified and as directed.

M&L for rendering 15mm thick on precast cement concrete block masonry with solid block surface in CM 1:4 in two layers outer 5 mm plaster with water proofing compound @ 3 % by weight of cement,finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be paid seperately under relevent item

Supply only water proofing compound complete all as specified and directed.

Returning filling in including spreading levelling watering & well ramming in layers n exc .25 cm each. complete all as specified and as directed.

Removal of excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point. In soil complete all as specified and as directed.

M&L precast RCC 1:2:4 type B1 as in landings, cover slab,chajjas etc.and similar articles with plain faces set in CM 1:6 over drain covering for approch path complete all as specified and as directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia. complete all as specified and as directed.

M&L for provided reinforced cement concrete pipe 450mm bore class NP-2 with collars laid and jointed with cement all as specifed and directed .

M & L for providing bed to drain pipes 450 mm dia in cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipe after they are laid & tested complete all as specified and as directed.

Surface dressing not exc 15 cm deep and getting out in soft/ loose soil complete all as specified.

Hardcore(Broken boulder) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L 75 mm thick PCC (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base surfice finished even and fough to receive floor topping complete all as specified.

M & L for machine made Rubber moulded precast conctete interlocking paver block (coloured), Glossy finish pre polished of any shape and size with white cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm/20 x 20 x25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry including 15 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed.

Providing cement concrete 1:2:4 type B-1 in filleting to edges of hardstanding/interlocking/chequred, rounded or chamfered ,Complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point.

Excavating in post holes (or similar holes) each n.exc 0.50 cum in any type of soil and getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil complete all as specified and directed.

M & L for PCC 1:3:6 type C2 ( using 40mm graded stone aggregate ) as in foundation filling or mass concrete or simillar work complete all as specified and as directed .

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, wind ties, etc.; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as directed.

Supply only, chain link fencing of MS galvanized fencing, any size or type as approved complete all as specified and as directed .

Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly.

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking ends stiffeners confirming to FE-410-W ( Gde E 250) quality-A or Fe 290 (Gde E-165) complete all as specified and as directed .

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt n exc 5cm long and dia of neck 11 to 15mm complete all as specified and as directed .

M&L for preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed .

M&L for preparation of new steel surfaces of any description, exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed .

M&L Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290.Gde-E-165 complete all as specified and as directed.

S&F mild steel plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections Fe-290(Gde E-165) complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof couring/ cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F readymade 9 feet or as required at site pulley operated cloth drying system, aluminium anodised 22mm outer dia pipe, 4 line channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc. complete all as specified and directed.

M & L for PCC 1:3:6 type C2 ( using 40mm graded stone aggregate ) as in foundation filling or mass concrete or simillar work complete all as specified and as directed .

S&F rolled mild steel in joist, channels, angles or tee sections, fixed ,post independently without connecting plates, etc.,conf to Fe 410-W (Gde-E-250) quality 'B'. complete all as specified and as directed.

M&L for preparing new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer all complete as specified and directed.

S&F anti rust pvc coated high quality stainless steel wire rope,multicolour,heavy duty and long lasting performsnce for hanging drying cloths in available diameter of wire in market including all necessary cleats ,screws ,nut bolts for fixing arrangemnts complete all as specified and as directed

M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

M&L for 2 coats of synthetic enamel paint over a coat of red oxied primer including preparation of new steel surface of any description over 10 cm width and girth.Complete all as specified and as directed.

M& L for mild steel black sheet in door 1.60 mm thick in steel gate and in similar work cut to size ,holes punched ,including round heraded screws ,cut nails or revets,and fixed to wood or steel framing with plain 40 mm lap joints with reveted or welded sams including or turning up, mitred complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B 1 using 20mm graded stone aggregate as in plinth protection / hardstanding/path etc complete all as specified and as directed.

OM GANESH CONSTRUCTION (BID ID -3104080)

Mehta and Co. (BID ID -3103071)