Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAdmitted-Finance | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s K.K.Sutrakar L1 |
|---|---|---|---|---|
| 1.00 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) | 20,000 | One Litre | 0.45 ₹9,000 Lowest |
| 2.00 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. | 500 | One Square Metre | 68 ₹34,000 Lowest |
| 3.00Arresting leakage through GI pipe by cutting and dismantaling upto length of 6.00 Metre and fixing the same includinmg providing and fixing G.I. Union , cutting and threading the pipe and making long screws, etc complete | ||||
| 3.10 | 25 mm nominal bore. | 10 | Each | 1,175 ₹11,750 Lowest |
| 3.20 | 40 mm nominal bore. | 10 | Each | 1,550 ₹15,500 Lowest |
| 3.30 | 50 mm nominal bore. | 10 | Each | 2,050 ₹20,500 Lowest |
| 3.40 | 65 mm nominal bore. | 5 | Each | 2,300 ₹11,500 Lowest |
| 3.50 | 80 mm nominal bore. | 5 | Each | 2,500 ₹12,500 Lowest |
| 4.00Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : | ||||
| 4.10 | 25 mm nominal bore | 10 | Each | 750 ₹7,500 Lowest |
Tender Value
₹3.5 L
EMD Value
₹7,000
Closing Date
4 Sept 2025, 6:00 pmClosed
Nodal Officer (Tender)
O/o Sr. Chief Engineer(Civil) BSNL MP Civil Zone Block-C, BDA Flats, First Floor, Vidya Nagar, Behind Petrol Pump Hoshangabad Road , Bhopal (M.P.)- 462026
Arresting leakage clamping of unutilized pipe line and cleaning of different water tank at wright town factory Jabalpur
2025_BSNL_246490_1
NIT NO. EECD/BSNL/JBP/2025-26/16
Open Tender
Civil Works
Item Rate
60 days
Jabalpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer Cash Oo GMTD BSNL Jabalpur
₹7,000
12 Sept 2025
26 Aug 2025
6 Sept 2025
26 Aug 2025
4 Sept 2025
26 Aug 2025
Amount
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
Arresting leakage through GI pipe by cutting and dismantaling upto length of 6.00 Metre and fixing the same includinmg providing and fixing G.I. Union , cutting and threading the pipe and making long screws, etc complete
25 mm nominal bore.
40 mm nominal bore.
50 mm nominal bore.
65 mm nominal bore.
80 mm nominal bore.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
25 mm nominal bore
20 mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
15 mm nominal bore
20 mm nominal bore
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work
15 mm nominal outer dia. Pipes.
20 mm nominal outer dia. Pipes.
25 mm nominal outer dia. Pipes.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work
15 mm dia. nominal bore
20 mm dia. nominal bore
65 mm dia. nominal bore
80 mm dia. nominal bore
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
25 to 40 mm nominal bore
50 to 80 mm nominal bore
Providing and fixing PTMT bib cock of approved quality and colour.
15 mm nominal bore, 165 mm long. Weighing not less than 110 gms.
Providing and fixing PTMT stop cock of approved quality and colour.
15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.
Providing and fixing PTMT pillar cock of approved quality and colour .
15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms.
Repairing of 100mm gun metal gate valve by replacing the damaged portion
Clamping of untilized pipeline of different size by cutting of pipe and welded/fixing with iron member
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .