Construction of Ima Market at Bishnupur Bazar, Bishnupur District, Under Special Assistance to States for Capital Expenditure 2020-21

Amount

(A) DISMANTLING

Dismantling sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of unserviceable materials within 50 m lead.(a) G.I. sheet roofing

Dismantling ballies in posts, purlins or rafters including stacking the materrials within 50 m. lead.

Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead.

Demolition of brick work below G.L. upto 1 m depth including stacking of serviceable materials within 50 m lead and disposal of unserviceable materials within 50 m lead(a) In cement mortar

Demolition above G.L. upto floor two level including disposal of unserviceable materials with 50 m lead and including cutting the necessary reinforcement and separating out from R.C.C./R.B. work.(a) R.C.C. work.

Demolition below G.L. upto 1 m.depth including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead and including cutting the necessary reinforcement and separating out from R.C.C./R.B. work.(a)R.C.C. Work

(B) Construction of Ground Floor

SH : EARTH WORK

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil anddisposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

(b) Above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth as well as excavated portion of footings and under floors with sand gravel including watering ramming, consolidating and dressing complete with a lead of 29 Km of the following sizes:-a) 40 mm

SH : CONCRETE WORK

Providing and laying cement concrete works in foundation and plinth excluding the cost of centering & shuttering in (a) C.C. 1:5:10 (1 cement :5 Kanhaighat coarse sand :10 graded stone aggrt. 40mm nominal size).

SH : REINFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Providing R.C.C. eaves board 25mm thick and 15 cm. to 30 cm wide in 1:1.5:3 (1cem:1.5c/sand:3 gr.st.aggrt.10 mm n/size ) including finishing and plastering the exposed surface with c.m.1:3 (1cem:3 c/ sand) of thickness not exceeding 6mm to give a smooth and even surface,centering shuttering but excluding the cost of reinforcfement. (i) Upto floor five level

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Thermo-Mechanically Treated bars.

SH : FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(d)Flat surface such as suspended flloor,roofs, landing & the like ( i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

(f) Staircase (e/c landing) slopping or stepped soffits i/c riser and strings etc.

SH : BRICK WORK

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand) in superstructure.(i) Above plinth level upto 1st floor level.

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand)

2nd class (local first class) brick work in superstructure (i) above plinth level upto 1st floor level in cement mortar 1:4(1 Cem:4C/Sand)

SH : WOOD WORK

Providing wood work in frames of doors, windows, c/windows & other frame and fixed in position.(a) Leihao wood

Providing and fixing 38mm thick panelled and glazed or panelled and glazed shutters for doors, windows, c/windows ect. Including bright finished brass hinges with necessary screws-(a) Teak wood (Special Class).

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F Brass Sliding door bolts bright finished or black enamelled with screws & nuts etc. complete.(a) 300X15 mm

P/F Brass Tower bolts (barrel type) with screws & nuts complete,(a) 250x10 mm

P/F Brass Handles with necessary screws etc. complete,(a) 125mm

SH : STEEL WORKS

Providing & fixing M.S. grills of required pattern to wooden frames vertically and horizontally with 66x33x4.80mm SHS at required spacing & frames based on Architectural drawing .. i/c priming,painting etc. Complete as per direction of Engineer-in-Charge.

Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint .a) In staircases i/c stringers, treads, landings, hand rails etc.

Providing and fixing on wall face G.I. pipe 100mm (NBL) as rain water pipe.

P/F 100mm G.I. Elbows

SH : ALUMINIUM WORKS

Providing and fixing aluminium works for doors windows, Ventilators and partions both extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fiixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up gaps at junctions, at top,bottom and side with required EPDM rubber/Neoprene gasket etc. Aluminium snap beading for glazing /panelling, C.P. brass/ Stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately):For shutters of doors, windows & ventilators including, providing and fixing hinges/ pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately).(a) Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basic item): (i) With float glass panes of 4.0 mm thickness

SH : FLOORING

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand), including grouting the joints with white cement and matching pigments etc.,complete. (a) Size of Tile 600x600 mm (Double Charged) (i) Branded.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 Kanhaighat coarse sand), including grouting the joint with white cement & matching pigments etc. complete.(a) Size of Tile 600x600 mm (Double Charged) (i) Branded.

Kota stone slab flooring over 20 mm ( average ) thick base of cement mortar 1 : 6 ( 1 cement: 6 coarse sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (a) 30mm thick

Granite stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm

Stone tile work for wall linning upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cem :3 kanhaighat C/sand) including pointing in white cement with an ad mixture of pigment to match the stone shade (a) 8mm thick (mirror polished and machine cut edge) granite stone of any colour and shade

Providing and laying 22 mm thick precast cement concrete chequered tiles on foothpath over 20 mm thick bed of cement mortar 1:3 complete as per drawing and technical specifications.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block (Rubber Moulded ) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of the engineer-in -charge.

SH : FINISHING

12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand).

15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand).

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an even shade.

Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Applying ready mixed priming coat (genuine red lead of appd. Quality) on steel work.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade.

Painting (two or more coats excluding priming coat) with superior ready mixed paint for wood work of approved quality in all shades on new wood work to give an even shade.

(C) Construction of First Floor

SH : REINFORCED CEMENT CONCRETE WORK

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Thermo-Mechanically Treated bars.

SH : FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(d)Flat surface such as suspended flloor,roofs, landing & the like ( i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

SH : BRICK WORK

2nd class (local first class) brick work in superstructure (i) above plinth level upto 1st floor level in cement mortar 1:4(1 Cem:4C/Sand)

SH : ALUMINIUM WORKS

Providing and fixing aluminium works for doors windows, Ventilators and partions both extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fiixed with rawl plugs and scre

Providing and fixing glass/A C P in aluminium doors , windows , ventilator shutters and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawing and directions of the engineer in charge ( Cost of aluminium Snap Beading shall be paid in basic item ): With plain glass panes of 4 mm thickness

SH : STEEL WORKS

Providing & fixing M.S. grills of required pattern to wooden frames vertically and horizontally with 66x33x4.80mm SHS at required spacing & frames based on Architectural drawing .. i/c priming,painting etc. Complete as per direction of Engineer-in-Charge.

Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint .(i) In beams & joists with connecting plates or angles cleats as in main & cross beams, hip & jack rafters, purlins connected to common rafter and the like.

P/F M S sheet eave board 0.5mm thick profile sheet welded on M S frame of ISA 25 x 25 x 3mm and flat bars 25 x 3 mm i/c painting etc complete

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete. (16 mm dia)

SH : ROOFING & CEILING

Trapzoidal Pre-painted Profile Sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, exclding the coat of purlinsr & trusses. (a) Pre painted Galvalume Sheet (PPGL)i) Profile sheet 0.50 mm/4.2 kgs/sqm

Trapzoidal Pre-painted Profile Sheet for Ridges Gutter or Valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps completed, exclding the coat of purlins rafter & trusses.(a) Pre painted Galvalume Sheet (PPGL) (i) Profile sheet 0.50 mm/4.2 kgs/sqm

Providimg and fixing false ceiling at all height including providing and fixing of frame work made of special sections,power pressed from M.S. Sheets and galavanized with zinc coating of 120gms/sqm ( both side inclusive) as per is 277 and consisting of angle cleats of size 25mm wode X 1.6 mm thick with flanges of 27mm flanges of 20mm amd 30mm long , the perimeter of ceiling fixed to wall /Partition with the help of rawl plugs at 450mm centerr,with 25mm long dry wall screws @ 230mm interbal, including fixing of gypus board to(a)Fully Perforated Gypsum board of size 1200 X2400 X12.4mm Having approx.15% perforated area with perforation size and pattern as approved by engineer Incharge

SH : FLOORING

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand), including grouting the joints with white cement and matching pigments etc.,complete. (a) Size of Tile 600x600 mm (Double Charged) (i) Branded.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 Kanhaighat coarse sand), including grouting the joint with white cement & matching pigments etc. complete.(a) Size of Tile 600x600 mm (Double Charged) (i) Branded.

Kota stone slab flooring over 20 mm ( average ) thick base of cement mortar 1 : 6 ( 1 cement: 6 coarse sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (a) 30mm thick

Granite stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm

Providing and fixing on wall face G.I. pipe 100mm (NBL) as rain water pipe.

P/F 100mm G.I. Elbows

SH : FINISHING

12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand).

15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand).

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an even shade.

Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Applying ready mixed priming coat (genuine red lead of appd. Quality) on steel work.

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade.

SH : MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 Kanhaighat coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 c/sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 Kanhaighat c/sand) with a floating coat of neat cement inside & outside as per standard design.

Irom Khogen Singh

Andy Pamei