RequiredPast Performance Bid to RA enabled RA Qualification Rule Primary product category Time allowed for Technical Clarifications during technical evaluation Estimated Bid Value Evaluation Method EMD Detail Advisory Bank EMD Amount ePBG Detail Advisory Bank 1/6 ePBG Percentage(%) Duration of ePBG required (Months). (a). EMD EXEMPTION: The bidder seeking EMD exemption
Requiredmust submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category
Requiredonly manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary
Requiredwherever it is applicable. Beneficiary: Assistant AO Zila Parishad Panchkula
RequiredDevelopment and Panchayats Department Haryana
RequiredN/A
Required(Sumeet Kumar) Splitting Bid splitting not applied. MSE Purchase Preference MSE Purchase Preference MII Purchase Preference MII Purchase Preference 1. Experience Criteria: In respect of the filter applied for experience criteria
Requiredthe Bidder or its OEM {themselves or through reseller(s)} should have regularly
Requiredmanufactured and supplied same or similar Category Products to any Central/State Govt Organization/PSU/Public Listed Company for number of Financial years as indicated above in the bid document before the bid opening date. Copies of relevant contracts to be submitted along with bid in support of having supplied some quantity during each of the Financial year. In case of bunch bids
Requiredthe category of primary product having highest value should meet this criterion. 2. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. 3. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and for determining the Eligibility Criteria related to Turn Over
RequiredPast Performance and Project/Past Experience etc. This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of quoted prices which would be determined by the buyer based on its own assessment of reasonableness and based on competitive prices received in Bid/RA process. 4. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or similar Category Products for 80% of bid quantity
Requiredin at least one of the last three Financial years before the bid opening date to any Central/State Govt Organization/PSU/Public Listed Company. Copies of relevant contracts (proving supply of cumulative order quantity in any one financial year) to be submitted along with bid in support of quantity supplied in the relevant Financial year. In case of bunch bids
Requiredthe category related to primary product having highest bid value should meet this criterion. 5. Reverse Auction would be conducted amongst all the technically qualified bidders except the Highest quoting bidder. The technically qualified Highest Quoting bidder will not be allowed to participate in RA. However
RequiredH-1 will also be allowed to participate in RA in following cases: i . If number of technically qualified bidders are only 2 or 3. ii . If Buyer has chosen to split the bid amongst N sellers
Requiredand H1 bid is coming within N. iii . In case Primary product of only one OEM is left in contention for participation in RA on elimination of H-1. iv . If L-1 is non-MSE and H-1 is eligible MSE and H-1 price is coming within price band of 15% of Non-MSE L-1 v . If L-1 is non-MII and H-1 is eligible MII and H-1 price is coming within price band of 20% of Non-MII L-1 Unit Cost Of Portable Thermal Foggine Machine Including All Accessories And Consumables Brand Type Technical Specifications Specification Document BOQ Detail Document 2/6 Advisory-Please refer attached BOQ document for detailed consignee list and delivery period. Consignees/Reporting Officer and Quantity S.No. Consignee/Reporting Officer 1 Sumeet Kumar Unit Cost Of Vehicle Mountable Thermal Foggine Machine Including All Accessories And Consumables Brand Type Technical Specifications Specification Document BOQ Detail Document Advisory-Please refer attached BOQ document for detailed consignee list and delivery period. Consignees/Reporting Officer and Quantity S.No. Consignee/Reporting Officer 1 Sumeet Kumar Buyer Added Bid Specific Terms and Conditions 1 . Generic OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity by up to 25% of the contracted quantity during the currency of the contract at the contracted rates. Bidders are bound to accept the orders accordingly. 2 . Generic Bidders shall quote only those products in the bid which are not obsolete in the market and has at least 7 years residual market life i.e. the offered product shall not be declared end-of-life by the OEM before this period. 3 . Generic Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower)
Requiredsubject to the maximum of quoted GST %. 3/6 4 . Generic Data Sheet of the product(s) offered in the bid
Requiredare to be uploaded along with the bid documents. Buyers can match and verify the Data Sheet with the product specifications offered. In case of any unexplained mismatch of technical parameters
Requiredthe bid is liable for rejection. 5 . Generic 1. The Seller shall not assign the Contract in whole or part without obtaining the prior written consent of buyer. 2. The Seller shall not sub-contract the Contract in whole or part to any entity without obtaining the prior written consent of buyer. 3. The Seller shall
Requirednotwithstanding the consent and assignment/sub-contract
Requiredremain jointly and severally liable and responsible to buyer together with the assignee/sub-contractor
Requiredfor and in respect of the due performance of the Contract and the 6 . Generic Without prejudice to Buyer’s right to price adjustment by way of discount or any other right or remedy available to Buyer
RequiredBuyer may terminate the Contract or any part thereof by a written notice to the Seller
Requiredif: i) The Seller fails to comply with any material term of the Contract. ii) The Seller informs Buyer of its inability to deliver the Material(s) or any part thereof within the stipulated Delivery Period or such inability otherwise becomes apparent. iii) The Seller fails to deliver the Material(s) or any part thereof within the stipulated Delivery Period and/or to replace/rectify any rejected or defective Material(s) promptly. iv) The Seller becomes bankrupt or goes into liquidation. v) The Seller makes a general assignment for the benefit of creditors. vi) A receiver is appointed for any substantial property owned by the Seller. vii) The Seller has misrepresented to Buyer
Requiredacting on which misrepresentation Buyer has placed the Purchase Order on the Seller. 7 . Scope of Supply Scope of supply (Bid price to include all cost components) : Supply Installation Testing and Commissioning of Goods 8 . Turnover Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the bidder is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. 9 . Turnover OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. In case of bunch bids
Requiredthe OEM of CATEGORY RELATED TO primary product having highest bid value should meet this criterion. 10 . OEM IMPORTED PRODUCTS: In case of imported products
RequiredOEM or Authorized Seller of OEM should have a registered office in India to provide after sales service support in India. The certificate to this effect should be submitted. 11 . Service & Support Availability of Service Centres: Bidder/OEM must have a Functional Service Centre in the State of each Consignee's Location in case of carry-in warranty. (Not applicable in case of goods having on-site warranty). Functional Service Centre. 12 . Service & Support Dedicated/toll Free Telephone No. for Service Support : BIDDER/OEM must have Dedicated/toll Free Telephone No. for Service Support. 13 . Service & Support Escalation Matrix For Service Support : Bidder/OEM must provide Escalation Matrix of Telephone Numbers for Service Support. 14 . Warranty Warranty period of the supplied products shall be 1 years from the date of final acceptance of goods or after completion of installation
Requiredcommissioning & testing of goods (if included in the scope of supply)
Requiredat consignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time of delivery of Goods. Seller should have well established Installation
RequiredCommissioning
RequiredTraining
RequiredTroubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details of Service Centres near consignee destinations are to be uploaded along with the bid. 15 . Warranty Timely Servicing/rectification of defects during warranty period: After having been notified of the defects/service requirement during warranty period
RequiredSeller has to complete the required Service/Rectification within 3 days time limit. If the Seller fails to complete service/rectification with defined time limit
Requireda penalty of 0.5% of Unit Price of the product shall be charged as penalty for each week of delay from the seller. Seller can deposit the penalty with the Buyer directly else the Buyer shall have a right to recover all such penalty amount from the Performance Security (PBG).Cumulative Penalty cannot exceed more than 10% of the total contract value after which the Buyer shall have the right to rectification to the Buyer. 4/6 16 . Buyer Added Bid Specific ATC Buyer Added text based ATC clauses Eligibility Criteria/Terms & Conditions:- 1 UDYAM Registration Certificate. 2 The bidders should have valid GST number. 3 The bidder must have valid PAN Number. 4 Labour Registration Certificate. 5 Capability Certificate up to 20 Lac. (Bank Solvency Certificate). 6 The bidder agency/firm should furnish an affidavit that “Agency/Firm” has never been debarred/Blacklisted in the past by any 7 The bidder will have to provide undertaking for a period of one year from the date of supply against any manufacturing defects
Requiredquality
Requiredfaulty raw 8 Technical Capacity of Bidder with UDIN number CA attested. 9 Bid Capacity Certificate with UDIN number CA attested. 10 Financial Capacity Certificate with UDIN number CA attested. 11 ITR with computation Certificate ( 3 year). 12 Net-worth Certificate. 13 ISO Certificate 9001:2015 14 ISO Certificate 14001 : 2015 15 ISO Certificate 50001 : 2018 16 ISO Certificate 45001 : 2018 17 Copy of Audited Balance sheet with CA attested ( 3year). 18 All the documents will be self-attested by the Bidder. 19 Bidders are invited for bid only by online process not deposit by hand in office. 20 Demonstration of Quoted model shall be carried out in the O/o CEO zila Parishad
RequiredPanchkula. 21 All the Materials for the works shall be arranged by the supplier/vendor at his own cost. 22 Supplier/Vendor shall provide at his own cost proper storage facility for the material brought by him to prevent 23 supplier/vendor shall make arrangement for watch and ward of the material at his own cost 24 Audited Financial Statement clearly indicating turnover
Requiredprofit & Loss account and TDS
Requiredduly counter signed 25 All Certificates and Documents in original or attested by notary attested not more than six-month-old of the 26 The Bidder should submit the copy of Aadhaar Card. 27 It is Mandatory for Bidder to provide Certificate of Accepting Additional Terms and Conditions on an Affidavit of 28 It is mandatory for Bidder has to submit the sample with same technical specifications to get his sample considered. 29 In Case of any Dispute Authority i.e. CEO ZILA PRISHAD has full right to take any Decision at any stage of bid 30 All the rates are inclusive all kinds of taxes. 31 All the rates will be F.O.R. 32 In case any technical issue or Hardware problem during the warranty period firm will provide the assistance at user location. 33 In case of guarantee of any item will mention separately on the bill and replace the item having guarantee within 7 days at the delivery 34 At the time of specimen checking
Requiredif any item of the purchase order not found as per the requirement/configuration then order of that 35 Provide one specimen for each item before delivery with configuration and model. 36 Clearance for the delivery will be issued separately after analyzing the specimen. Note:- 5/6 1. Specification is also attached here with complete details (filled mandatory). 2. The Material should be of Supreme Quality that stands for minimum one year from the date of completion. 3. Transportation and Labour facility is not provided by the department. 4. Risk of the Labour and Transportation will be borne by the bidder. 5. The price of bid pattern will be opened only those bidders who will be found technically qualified for the work and fulfill the requirements of tender. 6. The agency will complete the supply & installation up to 1 months after issuing the work order. 7. In case of any stage it is found that any information furnished by any of tender is false/incorrect
Requiredtender will not be consider. 8. The inspection committee is competent to amend or add any minor change while execution of the work and bidders is bound to do so. 9. The Quantity of the material can be increased as per the requirement of the department on same rates. 10. Department shall have right to reject the tender at any time & at any stage without giving any reason. . Disclaimer The additional terms and conditions have been incorporated by the Buyer after approval of the Competent Authority in Buyer Organization. Buyer organization is solely responsible for the impact of these clauses on the bidding process
Requiredits outcome
Requiredand consequences thereof including any eccentricity/restriction arising in the bidding process due to these ATCs and due to modification of technical specifications and/or terms and conditions governing the bid. Any clause incorporated by the Buyer such as demanding Tender Sample
Requiredincorporating any clause against the MSME policy and Preference to make in India Policy
Requiredmandating any Brand names or Foreign Certification
Requiredchanging the default time period for Acceptance of material or payment timeline governed by OM of Department of Expenditure shall be null and void and would not be considered part of bid. Further any reference of conditions published on any external site or reference to external documents/clauses shall also be null and void. If any seller has any objection/grievance against these additional clauses or otherwise on any aspect of this bid
Requiredthey can raise their representation against the same by using the Representation window provided in the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to such representations. Also
RequiredGeM does not permit collection of Tender fee/Auction fee in case of Bids/Forward Auction as the case may be. Any stipulation by the Buyer seeking payment of Tender Fee/Auction fee through ATC clauses would be treated as null and void. In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India
Requiredany bidder from a country which shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid
RequiredBidder has to undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action in accordance with the laws. 6/6