Dispensary Building at Saipum

Amount

Earthwork in excavation over areas (exceeding 30 cm depth, 1.50m in width as well as 10 sqm on plan) including disposal of excavated earth ,lead upto 50m and lift upto 1.50m, disposal earth to be levelled and neatly dressed. (a) Ordinary and Hard Soil

Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence post, etc and disposal of all surplus soil as directed within a lead of of 30 meter (a) Ordinary Soil

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering-All work upto plinth level… (a) 1:3:6 (1 cement :3 coarse sand :6 stone aggregate 40mm nominal size)

Reinforcement cement concrete work in walls including attached pillasters, columns, pillers, posts, piers, abutments, return walls, retaining walls, struts, buttresses, string or lacing courses, fillets, etc. upto floor 5 level excluding cost of centering shuttering etc.complete... (a) 1:2:4 ( 1 cement :2 coarse sand :4 stone aggregate 20mm nominal size)

Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases, spiral stair cases, cantilivers upto floor five level excluding cost of centering shuttering, finishing, reinforcement, etc.complete... (a) 1:2:4 ( 1 cement :2 coarse sand :4 stone aggregate 20mm nominal size)

Steel reinforcement for RCC work including straighthening, cutting, bending , placing in position and binding all complete… (a) Thermo-Mechanically Treated Bars of grade Fe-500 or more

Providing and filling stone aggregates of size below 90mm in plinth, etc. in layer not exceeding 10 cms in depth, consolidating each layer by ramming and watering and dressing complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations, etc.in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

First class Brickwork in foundation and plinth in: (a) In cement mortar 1:4

Half Brick masonry work first class in superstructure above plinth level upto floor five level… (a) In cement mortar 1:3

Centering and shuttering including strutting, propping etc. and removal of form for all heights (a) Foundations, footings, bases of columns etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for all heights (a) Lintels, beams, plinth beams, girders, bressumers and cantilevers, column, etc.

12mm Cement plaster 1:3 (1cement : 3fine sand)

Providing 1st class local wood work dressed in frames of chaukhat for doors, windows,clerstory windows fixed in position

Providing and fixing 1st class local wood panelled shutters for doors etc. including MS.butt hinges with necessary screws etc. complete (a).40mm thick

Providing and fixing factory made PVC door frame made of PVC extruded section having over all dimension of 48x40 mm ( tolerance+ 1 mm) with wall thickness 2.0mm+0.2mm, corner of the door frame to be mitred and joint by means of plastic/M.S.galvanished brackets and stainless steel screws. The hinge side vertical of the frames reinforced by galvanised M.S. tube of size 19x19mm and 1 mm+ 0.1mm wall thickness and 3 Nos.stainless steel hinges fixed to the frame complete as per manufactureres specifacation and direction of Engineer-in-charge.(Sintex or Plasopan)

Factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24mm and wall thickness 2mm (± 0.2mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galavanised/plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20mm and 1mm (± 0.1mm) wall thickness. The lock rail made up of H section, a uPVC hollow section of size 100x24mm and 2mm (± 0.2mm) wall thickness, fixed to the shutter style by means of plastic/galvanised M.S. U cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620mm, having over all thickness of 20mm and 1mm (± 0.1mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S rod and fastened with nuts and washers, complete as per manufacture's specification and direction of Engineer-in-charge (For W.C. and bathroom door shutter) (Sintex, Plasopan or equivalent).... 24 mm thick shutter

Providing and Fixing anodised alluminium work for doors, windows, ventilators and partitions with extruded built up standard sections/other sections of approved make conforming to IS:733 and IS:1285 fixing with dash fasteners of required dia. and size, including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling.CP brass/ stainless steel screws all complete including fixing of glasses but excluding cost of glasses... Anodised .... 2-track sliding windows/ventilators

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 40mm dia. steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles,including applying a priming coat of approved steel primer.

Supplying of glass panes at site… (a)5mm thick plate sheet glass in window

Providing and fixing M.S.handles with necessary screws, etc.complete (a) 125 mm

Providing and fixing M.S.Tower Boltrs (socket bolt) bright finished with necessary screws,etc.complete….(a) 100 mm

Providing and fixing M.S.Tower Boltrs (socket bolt) bright finished with necessary screws,etc.complete…(a) 300 mm

Providing and fixing M.S.Sliding Door Bolts (aldrops) bright finished and/or black empanelled with nuts and screws etc.complete… (a) 300 x 16 mm

Providing and fixing White Vitreos China pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (hanle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (i). White

Providing and fixing water closet squating pan (Indian type W.C.pan) with 100mm uPVC P or S trap,10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (hanle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (a) Orrisa pan with integral type foot rests. (i). White

Providing and fixing vitreous China tall pedetral of Parryware/ Hindware/ Cera and equivalent make for wash basin completely recessed at the back for the reception of pipes and fittings….. (i) White

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to specified by the manufacturer), of approved make , all colours, shades, except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1cement :3 course sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and ceramic glazed floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours, shades, except white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1cement :4 course sand) including pointing the joints with white cement and matching pigments etc complete as per design colour... (A)Matt/Anti-scratch

12 mm cement plaster 1:3 finished with a float coat of neat cement

Providing and fixing CPVC pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This include jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge ... Interrnal works .Exposed on wall…. (a) 15mm dia. nominal bore

Making connection of Astral CPVC pipes distribution branch by providing and fixing equal Tee with jointing, testing complete including cutting and making good etc. (a) 15mm dia. Nominal bore

Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 90 degree with jointing, testing complete including cutting and making good etc (a) 15mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Socket/Coupling with jointing, testing complete including cutting and making good etc…. (a)15mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Reducer/Transition Bushing with jointing, testing complete including cutting and making good etc…..(a) 20 x 15mm

Providing and fixing 15mm nominal bore chromium plated brass bib cock of approved quality (a) Class-III

Providing and fixing chromium plated brass long neck pillar cock of approved quality (a) 15mm nominal bore .Classik

Providing and fixing on wall face SWRPVC soil, waste and vent pipes including jointing with rubber lubricant/cement solvent complete (a) 110 mm dia.

Providing and fixing SWRPVC plain bend of reguired degree (45°) including jointing with rubber lubricant/cement solvent complete (a).110mm dia.

Providing and fixing single equal SWRPVC plain junction of reguired degree (T-Junction) (a).110x110x110mm.

Providing and fixing on wall face SWRPVC soil, waste and vent pipes including jointing with rubber lubricant/cement solvent complete (b) 75 mm dia.

Providing and fixing single equal SWRPVC plain junction of reguired degree (T-Junction) (a) 75x75x75mm.

Providing and fixing SWRPVC plain bend of reguired degree (45°) including jointing with rubber lubricant/cement solvent complete (a).75mm dia.

White washing with lime to give an even shade: New work (three or more coats)

Bidder Name

Amount in Words

RF CONSTRUCTION & CONSULTANCY

KRISHNA KANTA ROY

RAHIM UDDIN KHAN

RF CONSTRUCTION & CONSULTANCY

KRISHNA KANTA ROY