GE(S) BTD TOKEN NO 74 OF 2023-24 REPAIRS REPLACEMENT OF INTERNAL UNSERVICEABLE POINT WIRING REWIRING FITTINGS FIXTURES DBs SUB MAIN WIRING SWITCHES AND CONNECTED ACCESSORIES WORKS IN SECTOR IV AND REPAIRS TO GEYSER AND OTHER RELATED WORKS IN ZONE A

Amount

Taking down carefully existing copper/Aluminum point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing complete allas specified and directed

Dismentaling & taking down of existing unsv light fittings/fixtures complete all as specified & directed

Dismentaling & taking down of existing unsv batten/angle holder for replacement complete all as specified & directed

Dismentaling & taking down of existing unsv switch 5 Amp for replacement complete all as specified & directed

Dismentaling & taking down of existing unsv switch 15 Amp complete all as specified & directed

Dismentaling & taking down of existing unsv socket 5A complete all as specified & directed

Dismentaling & taking down of existing unsv socket outlet 15 Amp complete all as specified & directed

Dismentaling & taking down of existing unsv stepped type fan regulator for complete all as specified & directed

M&L for flameproof point wiring for one light point controlled by one way flameproof switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLS in and including ERW stove enameled surface rigid conduit 20 mm dia heavy duty ISI marked, accessories such as flame proof joint/junction boxes, bends, corners, tees,unions, reducers, nipples etc.all in LM6, screws, clips, clamps etc. and including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLS connected to common earth dolly complete and then making good the surface complete all as specified and directed. (Note:- switch with termination box shall be measured and paid for separately under appropriate items of Sch 'A' ).

All as per srl item No. 9.00 (here-in-before) but for each additional light point on the same switch circuit.

M & L for point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi stranded copper conductor cable FR-LSH in existing conduit, and existing sunken boxes but including 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch and /or fan regulator including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete all as specified and directed

All as per srl item No. 11.00 (here-in-before) but socket 3 pin 5 Amp 230 volt flush type on same board

All as per srl item No. 11.00 (here-in-before) but for one socket point out let 3 pin 5 Amp in independent board.

All as per srl item No. 11.00 (here-in-before) but for call bell point.

All as per srl item No. 11.00 (here-in-before) but for one light point controlled by two two way switch

All as per srl item No. 11.00 (here-in-before) but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified

S&F Switch piano, flush type single pole, one way 15 Amp complete all as specified

S&F Switch piano, flush type single pole, two way 5 Amp complete all as specified

S&F bell push 5/6 Amps 230 V AC complete

S&F Socket outlet 3 pin, 5A, flush type all as specified

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd.

S&F Ceiling rose, 3 terminal PVC/polycarbonate, suitable for 230 V, AC, 50 Hz supply.

S&F call bell ding dong type AC 230 V complete.

S&F Lamp holder PVC/polycarbonate type with back plate complete all as specified

S&F wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 1.2 m, 20watt, 1.2 m 3000/6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver complete complete including making connection complete all as specified and directed.

S&F in repair LED light fitting 2x16/2x20 watt flame proof, CMRI certified recommended for gas/vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed

S&F in repair of flameproof cum waterproof LED Bulkhead light fitting of 15W, IP 66 protection of cast aluminium alloy material and heat and impact resistant toughened A clear glass having anti corrossive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed

S&F in repair of flameproof cum waterproof LED Bulkhead light fitting of 40W, IP 66 protection of cast aluminium alloy material and heat and impact resistant toughened A clear glass having anti corrossive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed

S&F LED 7W lamp(base B-22) 3000/6500K not less than 90 lumen/watt efficacy complete all as specified and directed.

S&F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete allas specified and directed

S&F wall mounted LED batten fitting 10 (±10%) watt, 6500K, 0.6m, efficacy not less than 90 lumen/watt , extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete includign making connection complete all as specified and directed.

S&F LED flood light fitting sqaure shape 150 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp, bracket with impact and corrossion resistant complete with IP 65/66 protection with suitable bolt and nuts, fixing at any height upto 15m complete with making connection complete all as specified and directed

S&F LED downlighter/spot light fitting, recessed mounted, round shaped of ceiling cut outφ160mm, 12watts efficacy not less than 90 lumen/watt, 6500K extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

S&F LED landscape/bollard light fitting, round shaped of 0.6m pole size, 8/10watts, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, IP65, PC diffusor, module and inbuilt driver complete including making connection & fixing of pole base with nut and bolt to PCC pedestal/coping complete all as specified and directed.

S&F LED panel light fitting, recessed mounted, square shaped of size 2'x2' area, 36(±10%)watts efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

S&F post top lantern LED type 20 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistance complete with driver and lamp complete all as specified and directed

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm along with earth wire 6.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit complete all as specified.(Note :- two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable will be measured as one running length)

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 10 sqmm along with earth wire 10.0 sqmm copper conductor single core wire connected by common earth in concealed 25mm medium grade PVC conduit complete all as specified.(Note :- two lengths of 10.0 sqmm cable and one length of 10.0 sqmm earth cable along with concealed 25mm medium grade PVC conduit will be measured as one running length)

S&F in replacement sheet metal encloser double door 8 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

-do- all as per item No 41 above but 04 way TPN 415 V complete all as specified and directed.

S&F in repair MCB 6-32 Amp 240V SP 10 KA ‘C’ series complete all as specified

S&F in repair MCB 40-63 Amp 240V SPN 10 KA ‘C’ series complete all as specified

S&F in repair MCB 415V 40 to 100Amp TPN 10 KA ‘C’ series complete all as specified

S&F in repair MCCB 415V, TPN/FP 63A 16kA complete allas specified

S&F in repair MCCB 415V, TPN/FP 100A 16kA complete all as specified

S&F in repair rigid non-metallic PVC conduit external dia 20mm in size exclusive of boxes(junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. Complete all as specified

S&F in repair PVC junction boxes(1 to 4 way)

S&F in repair Hylam sheet cover 3mm thick of size 5"x5" complete with machine screw/ washer with provision of witches, sockets, fan regulators etc complete all as specified

S&F in repair Hylam sheet cover 3mm thick of size 8"x5" complete with machine screw/ washer with provision of witches, sockets, fan regulators etc complete all as specified

S&F in repair Hylam sheet cover 3mm thick of size 11"x8" complete with machine screw/ washer with provision of witches, sockets, fan regulators etc complete all as specified

S&F in repair MS Sunken box of size 4"x4" with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified

S&F in repair MS Sunken box of size 7"x4" with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified

S&F in repair MS Sunken box of size 10"x7" with approved depth & thickness complete with earth dolly including making good the disturb surfaces with CM (1:3) to match the existing complete all as specified.

Supplying and fixing in replacement 1100volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6sqmm complete all as specified

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.

M&L for dismentaling and taking down complete 25/35/50 ltr capacity geysers from site and brought to e/m yard store & Refixing the same after carrying out following works:- (i) complete cleaning and de-scaling of inlet and outlet connections, inner tanks, fittings, fixtures & outlet pipelines etc with suitable chemical agent. (ii) Complete servicing and maintenance (iii) Replacement of unsv spares as deemed necessary such as inner tank, outer cover, inner assembly, glasswool, rubber gaskets, nuts, bolts, clamps, etc., repair of minor leakages if any by carrying out minor welding/brazing. (iv) complete testing and to ensure proper functioning & maintaining proper water temparature. complete all as specified and directed by Engineer-in-Charge. Note : (a) Cost of minor spares such as chemical agents, rubber gaskets, nuts, bolts, clamps etc and minor welding/brazing deemed to be included in the quoted rate. (b) The cost for all major spares & items such as inner tank, outer cover, inner assembly, glasswool shall be paid in respective items from item No 2 to 7.

Inner tank made of stainless steel for geysers of capacity 25 ltr complete all as specified an directed

Inner tank made of stainless steel for geysers of capacity 50 ltr complete all as specified an directed

Outer body/cover suitable for 25ltr cap geyser made out of mild steel pre-treated and stove enamelled sheet of minimum size 18 SWG complete with top and bottom cover, rubber gasket, stead screw for fixing the top and bottom cover to outer body easing including two coat of white synthetic enameled paint over one coat of red oxide primer complete all as directed.

Outer body/cover suitable for 50ltr cap geyser made out of mild steel pre-treated and stove enamelled sheet of of minimum size 18 SWG complete with top and bottom cover, rubber gasket, stead screw for fixing the top and bottom cover to outer body easing including two coat of white synthetic enameled paint over one coat of red oxide primer complete all as directed.

Geyser inner assembly made of stainless steel for geyser of capacity 25/35/50 ltr having suitable numbers of slots & pipes provisions complete with rubber gasket & bolts for fixing complete all as specified and directed by Engr-in-charge.

Glass wool of minimum density 48 Kg/m3 of approved quality all as directed by Engineer-in-Charge.

S&F in repair bottom inspection cover in two pieces made of minimum size 20 SWG MS sheet suitable for 25/35/50 ltrs capacity geysers of any make, inclusive of one red oxide primer coat, one under coat and one finishing coat of white color paint complete on outer surface and inner surface complete all as directed by Engineer-in-charge.

S&F in repair top cover made of minimum 20 SWG size MS sheet suitable for 25/50 ltrs capacity geysers of any make, inclusive of one redoxide primer coat, one under coat and one finishing coat of white color spray paint complete on outer surface and inner surface complete all as directed by Engineer-in-charge.

M&L for spray painting to geysers of capacity 25 ltrs with two coat of synthetic enamel white paint over one coat red oxide(primer) including scratching of old paint and making surface smooth by using filler etc all as directed by Engineer-in-charge.

M&L for spray painting to geysers of capacity 50 ltrs with two coat of synthetic enamel white paint over one coat red oxide(primer) including scratching of old paint and making surface smooth by using filler etc all as directed by Engineer-in-charge.

M&L in repairs for grouting the one set of bolts, (one MS/SS strip if required) of suitable size including nuts & washer in wall including taking down & refixing the existing geysers at site for any make & size and making good the disturbed surface all as directed.

S&F in replacement heating element for geysers 1.5 KW 230V AC, 50 cycle, triangular/round type ISI marked complete with rubber gasket complete all as directed by Engineer-in-Charge.

S&F in replacement heating element for geysers 2.0 KW 230V AC, 50 cycle, triangular/round type ISI marked complete with rubber gasket complete all as directed by Engineer-in-Charge.

S&F in replacement thermostat ISI marked stem type 240 Volts, AC supply temp range at least 30 to 75 degree C for geyser/solar water heater system complete all as specified and directed by Engineer-in-Charge.

S&F in replacement indicator lamp red/green colour 230 volts, AC, suitable for geyser compete all as specified and directed

S&F in replacement brass safety valve, ISI marked for geysers, all as directed by Engineer-in-charge.

S&F in replacement PVC connection pipe wire braided of 15 mm dia 450 mm long, ISI marked temperature resistant suitable for cold & hot water with Brass nuts and PVC/rubber washers at both ends compelte all as specified and directed.

S&F in replacement PVC connection pipe wire braided of 15 mm dia 600 mm long, ISI marked temperature resistant suitable for cold & hot water with Brass nuts and PVC/rubber washers at both ends compelte all as specified and directed.

S&F in repair air relief valve complete all as directed by Engineer-in-charge.

S&F in repair non return valve made of brass complete all as directed by Engineer-in-charge.

S&F in repair PVC insulated and round sheathed 3 core multistranded copper conductor FR cable of size 1.5sqmm 1100V ISI marked complete all as specified and directed by Engineer-in-Charge.

S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed

S&F in repair MCB 20 to 32 Amp 230 volts AC, Single Phase capacities 'B' series 10KA rupturing capacaity including making connections all as directed by Engineer-in-charge.

S&F in repair plug top 3 pin 15/16 Amp ISI marked 250V for geyser cable complete all as soecified and directed

S&F in repair metal clad plug top 2 pin & earth,ISI marked 20 Amp 250V complete all as specified

S&F in repair metal clad socket 2 pin & earth,ISI marked 20 Amp 250V complete all as specified

Labour only for attending door to door, ARMAAN, & user complaints to carryout inspection, cleaning & normal servicing of geyser at various location for faulty connections and making geyser serviceable after testing and marking legible MES No on geyser complete all as specified and directed Note: 1. Cost of minor spares such as rubber gaskets, nuts, bolts, clamps, flanges etc, minor welding/brazing, marking & testing deemed to be included in the quoted rate. 2. Proper record & document to be maintained for each complaint/inspection duly signed by user, cost incurred on this deemed to be included in the quoted rate.

Supply, laying & testing Tubes(In Repair), 'medium grade' galvanised, 15mm bore with all fitting, unions, elbows etc and fixed complete to walls and ceilings or laid in floors

Supply, laying & testing Tubes(In Repair), 'medium grade' galvanised, 20mm bore with all fitting, unions, elbows etc and fixed complete to walls and ceilings or laid in floors

M&L in repair for gun metal globe or gate valve with iron wheel head screwed both end for iron pipe of size 15mm.

M&L in repair for gun metal globe or gate valve with iron wheel head screwed both end for iron pipe of size 20mm.

S&F in repair Geyser element foldback 2.0kW cup type for bajaj/crompton/ Racold type geyser complete with & including support assembly complete all as specified and directed

S&F in repair adjustable temperature controlled industrial capillary type thermostat, AC 16A, 30-80˚C for bajaj/crompton/Racold type geyser complete all as specified and directed

S&F in repair multifunction safety valve suitable for bajaj/crompton/Racold type complete all as specified and directed

S&F Heavy duty Stainless Steel Connection Pipe ISI marked of of 15 mm dia 450 mm long suitable for cold & hot water, for water heaters with SS nuts and PVC/rubber sealing washers complete all as specified and directed

S&F Heavy duty Stainless Steel Connection Pipe ISI marked of of 15 mm dia 600 mm long suitable for cold & hot water, for water heaters with SS nuts and PVC/rubber sealing washers complete all as specified and directed

S&F in replacement heating element coil/spiral type for instant/tankless geysers 3.0 KW 230V AC, 50 cycle, ISI marked complete with rubber gasket complete all as directed by Engineer-in-Charge.

NOTE :- ARMAAN COMPLAINT/DAY TO DAY/DOOR TO DOOR COMPLAINTS:- Complaints regarding repair/replacement to these items to be attended unconditionally. All in cost incurred upon deemed to be included in respective items

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

Aman Enterprises

M/s NIRMAN BUILDERS

M/s VISHAL ELECTRIC STORE