REPAIRS TO JOINERY, TILING, SANITARY FITTINGS AND OTHER COMPREHENSIVE MAINTENANCE TO MD OFFRS ENCLAVE AND SERVANT QUARTERS OF SP MARG IN THE AOR OF AGE BR SP MARG UNDER GE NEW DELHI

Amount

M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed. (Make : Somany/Kajaria/Orient Bell)

M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/450x300mm/300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brickwork in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and as directed. (Make : Somany/Kajaria/Orient Bell)

S&F 10 mm to 12 mm thick heavy duty endura tiles as in porch parking open lawn, garden etc area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15 mm thick screed in cement mortar 1:4 as in floors ( size of colour tiles will be approved by GE) complete all as specified and directed. (Make : Somany/Kajaria/Orient Bell)

All as per item No 1.00 here-in-before but in vertical surfaces such as dado/skirting etc laid over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed. (Make : Somany/Kajaria/Orient Bell)

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises (Outside MoD land to any lead) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 15mm thick cement plastering on brickwork or concrete surfaces in CM 1:3 finished even & smooth without using extra cement mixed with water proofing compound complete all as specified and directed. ( Note : WPC shall be measured and paid separately)

M&L for Plain cement concrete (1:5:10) type E-2 using 40mm graded brick course aggregate as in filling under floor as in sunken portion complete all as specifed and directed.

Supply only water proofing compound as per IS-2645 (PIDIPROOF-LW PLUS) or equivalent from SIKA, FOSROC, Chouksey Chemicals

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in flooring, finished fair and even, mixed with water proofing compound complete all as specified and directed. ( Note : WPC shall be measured and paid separately.)

S&F in repairs Vitreous China squatting pattern, Orissa pattern size 580 x 440 mm white with integral foot rest ( excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified.

S&F in repairs PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, White with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description complete all as specified and directed.

S&F in repairs sand cast, cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint laid in trenches or floors, including taking down old unserviceable CI pipes complete all as specified and directed.

S&F in repairs sand cast, cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to wall on any height of building incliding tacking down old unserviceable CI pipes complete all as specified

S&F in repairs sand cast, cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint laid in trenches or floors, including tacking down old unserviceable CI pipes complete all as specified

S & F in repairs sand cast, cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint fixed to wall on any height of building incliding tacking down old unserviceable CI pipes complete all as specified

S&F in repairs stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 75mm bore pipe complete all as specified and directed.

S&F in repairs stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed.

S&F in repairs CI bends 75mm dia (any radius), diminishing pieces or tapers ( larger bore measured), with oval access door complete all as specified and directed.

S&F in repairs CI bends 100mm dia (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.

S&F in repairs CI bends 100mm dia (any radius), with duck's foot or heel rest complete all as specified and directed.

S&F in repairs CI nahani trap with grating including jointing to waste pipe, dia of outlet 75mm fixed in PCC 1:2:4 type B-1 complete all as specified and directed. (ISI Marked)

Dismantling timber scantling as in fillets, rails, post, rafters, purlins, etc. under 40 Sq.cm in section in unframed work complete all as specified and directed.

M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.

M&L in repairs for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples and fixed complete all as specified and directed.

Taking up or down steel tubing and connection incl cleaning for refixing or removal to store for 15 mm dia pipe complete all as specified and directed.

M&L for Mild steel galvanized steel tubing of 15 mm bore with screwed socket joints as in concealed /open pipe work , medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed.

Refixing old steel tubing and connections of 15 mm bore including new fiitings in new or old position complete all as specified and directed.

S&F in repairs Bib tap, 15 mm bore, stadard of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed.

S&F in repairs Stop valves or angle valve type, cast copper alloy, fancy type chromium plated of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

M&L in repairs for Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc to receive new plaster complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6, on other than fair faces of brickwork or on one side of lathing (internal surfaces), finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick cement plastering on fair faces of brickwork or concrete surfaces , in patches n.exe 3 sq m each, in CM 1:3 on ceiling / chajjas etc finished even & smooth without using extra cement completed as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:4, on fair faces of brickwork or cement concrete surfaces (External surfaces), finished even and fair complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall of any description not otherwise described and applying two coats of weather proof, water based, modified acrylic exterior wall paint with silicon additives (with anti fungus and anti algae properties) over a coat of solvent based primer complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coat of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified and directed.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each complete all as specified and directed.

Taking down shutters of any description n. exc 1.00 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

M&L for Plain Solid, straight chowkats and frames of second class hard wood (suitable for joiner’s and carpenter’s work), wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F Stainless steel fastener of size 200 to 250mm for fixing wooden door frame and like in postion complete all as specified and directed.

M&L for MS flat iron as in hold fast, bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required hook (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains, hand made sliding bolts; clamps; holdfasts; wall ties, hooks for hanging fans; plain angle cleats for secsuring purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290Gde-E-165 complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in anchorging holdfast, bed plate, coping and similar works, etc complete all as specified and directed.

S&F 2nd class hard wood 30mm thick glazed and skeleton window and ventilators shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, fixed to chowkats, sizes of members of shutters complete all as specified and directed.

S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side with teak wood lipping on edges of shutter complete all as specified and directed.

S&F Aluminium sheet, plain, 0.5 mm thick , including taking down old sheet from doors complete all as specified and directed.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying and fixing in opening as per specification and drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted with MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement all as per specification and drawing.

S&F Stainless steel butt hinges of size 100mm fixed complete all as specified.

S&F aluminium anodised barrel tower bolts of extruded section of 150 mm length complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 150 mm long, complete all as specified and directed.

S&F in repairs MS pressed handles oval type stove enamelled black, 150mm size complete all as specified and directed.

S&F in repairs MS pressed handles oval type stove enamelled black, 100mm size complete all as specified and directed.

S&F in repairs mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed 200mm long bolts complete all as specified and directed.

S&F in repairs mild steel barel tower bolts, stove enamelled black with bright bolts and fixed 150mm long bolts complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads or including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S&F Sheet glass, 3mm thick ordinary quality, in squares n exc 0.50 sq. m each pane glazing with oil putty or glazing clips or wooden beadings, aluminium beadings etc complete all as specified and directed.

S&F mild steel sliding door bolts, plate type stove enamelled black with bright bolt not less than 12 mm dia with and including minimum of six bolts and nuts, four on bolt plate and two on staple plate of 250 mm long complete all as specified and directed.

M&L 50 mm thick, cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection, finished even and fair including providing groove in plinth protection not exc 3.00 Sqm panel and filling of joints/groove with mixture of sand and bitumen in the ratio of 1:2, grade of bitumen 85/25 complete all as specified and directed.

Raking out joints/pointing to brick tiles, laid flats in floors, roofs, aprons etc built in cement mortar complete all as specified and directed.

M&L for flush pointing to brick tiles laid flat in roof, aprons etc in CM 1:3 complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of primer on new wooden surfaces of any description over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

Demolition of brickwork stone/boulder masonry built in cement mortar including all quoins, pillars etc by breaking up or down, separation of serviceable material from the unserviceable, stacking the serviceable material within 100m of place of work and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m all as directed.

M&L for brickwork with old size sub class B bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for expanded metal, cut to length, bent to shape required and tying or welding to mild steel angle, tee or flat iron sections/ members (Expanded metal not excceding 4.00 Kg/Sqm.) complete all as specified and directed.

M&L for mild steel angle iron, flat iron and similar section as in framed work in doors or gate frames including necessary hold fasts etc required for hanging and fastening etc complete all as specified steel work confirming to Fe-410W (Gde E-250) complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M/S Sunil Steel Works

GANGA CONSTRUCTION

akhil enterprises