Constt. of bathing ghat at wno 4 near pond

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like notexceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kind of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:Providing laying 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brickwork above plinth level

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size

Reinforcement for RCC work including cutting,straightening ,bending ,binding etc.

Centring & shuttering including strutting , propping & removal of formwork for foundation footing

Suspended floors, roofs, landings, balconies and access platforms

Edges of slab below 20cm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry stone agg.

Plastering with 15mm thick plaster in 1:4 mix

Plastering with 12mm thick plaster in 1:4 mix

Plastering with 6mm thick plaster with 1:3 mix

P/L vetrified flooring tile in different size with water absorption less than 0.08% and conforming to IS 15622 of approved mark in all colour and shade laid on 20mm thick cement mortar 1:4 including grouting the joint with white cement complete ( size 30x30 cm )

Tile work in skirting ,riser of step and dado over 12mm thick bed of cement mortar 1:3 and joint with grey cement slurry 3.3 kg/sqm. Including pointing in white cement

50mm thick Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete

Apply one coat of water thinable cement primer of approved brand and manufacture on wall surface.

Painting with emulsion paint of appproved brand and manufacture to give an even shade. Two or more coat on new work.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mmangle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.angle iron and 3mm M.S. gusset plates at the junctions and corners, all

P/F brass bib cock of approved quality 15mm nominal bore

short nose

long nose

P/F G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the wall etc. 15 mm nominal bore ( internal work ).

P/F G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the wall etc. 20 mm nominal bore ( external work ).

P/F G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the wall etc. 25 mm nominal bore ( external work ).

Cutting of holes in brick masonry / RCC slab / floor for passing pipes.) Brick Masonry 300mm x 300mm

Constructing bricks masonry manhole in cement mortar 1:4 mix RCC tob slab with 1: 2 : 4 : mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in side plastering 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design inside 90 x 80 cm and 45cm deep including CI cover with frames (light duty) 455 x 610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg with FPS bricks with class designation 75 and with

(a) crushed stone aggregate.

Providing and placing on terrace (at all floors levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License nos.with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank (Sintex, Electroplast, Star, Lotus, or equivalent having valid ISI license).

Providing and fixing PTMT extension nipple for water tank pipe, fitting of approved quality, colour and make (Prayag or equivalent).

(i) 32mm nominal bore

Providing and fixing of 0.5 Horse Power Motor.

Making soak pit 2.5m diameter 3.0 M deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75mm and S.W. drain pipe 100mm diameter 1.8 m long complete as per standard design with FPS bricks.

S/F 'C' series , SP MCB:- Supplying and fixing 5 amps to 32 amps rating, 240 Volts, 'C" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

single pole

supply and fixing of main service line 2.5sqm.twin core aluminium cable

led pattern tube light bulb

Add cost of sign Board

SURINDER PAUL SINGH

M/S BIKRAM SINGH GOVT CONTRACTOR