SPECIAL REPAIR TO BLDG NO P-5/5 (ORS LIVING ACCN) AT SATWARI UNDER GE SATWARI

Amount

B&R PORTION:- Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified.

Roughning surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3kg/sqm etc complete all as specified.

Machine cut kota stone slab flooring 20-25 mm thick laid over cement screed based as in floor, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishishing with & including 20 mm screed bed layed with CM 1 :4 etc. complete all as specified.

Machine cut kota stone slab in skirting 20-25 mm thick fixed over cement plaster as in skirting, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with & including 10 mm thick even & rough plastering with CM 1 :6 etc, complete all as specified.

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key and scrabbing down with water etc. complete all as specified.

Rendering 05mm thick in CM (1:3) as in ceiling finished the surface even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surfaces finished the surface even and smooth without using extra cement etc., complete all as specified.

Description all as per item No-07 above but in CM (1:6), complete all as specified.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Brick work with sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4), complete all as specified.

Brick work with sub class ‘B’ bricks (old size) straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.

Taking down CI / PVC pipes 100/110 mm dia including all fittings like bends, branch pieces, connectors, heel rest bends etc all as specified and directed.

110 mm bore PVC (SWR) bend type 'B' in any radius fixed, complete all as specified.

Mild steel work as in hold fast and stack clamp etc made out of flat iron 25 mm x 3 mm including necessary welding or fixing with nut and bolts, complete all as specified and as directed.

Removal of complete existing water proofing treatment of any description on roof ( including PCC tiles) surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items etc complete all as specified and as directed.

P.C.C 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.

P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs or chamfered angles and edges including troweling slightly smooth, complete all as specified and as directed.

10 mm thick rendering in cement mortar 1:4 on concrete surfaces upon roof when concrete is still green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately.

15 mm thick rendering in cement mortar 1:4 on concrete surfaces finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately

Supply only Liquid water proofing compound complete all as specified and as directed.

Applying water proofing treatment on roof surfaces with the following ;- (a) First coat of bitumen primer conforming to IS-3384 @ 0.5Kg / sqm to the prepared surface, till the surface is properly impregnated and the solvent oil in primer shall be allowed to evaporate completely. (b) Second APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap on primed surfaces by forced application as per manufactures instructions complete all as specified.

Preparation of newly sufrace of APP membrane and applying two coats of water based bituminious alumunium paint @ 200 ml per sqm etc of Make :- IWL, STP Ltd, Pidilite Industries Ltd etc complete all as specified and as directed

Cutting out cracks to ‘V’ section in existing roof or terracing, cleaning out, wetting and filling solidly a hot mixture of bitumen and dry sand in proportion of 1:1 by weight complete all as specified and as directed

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed.

Pressed steel frame of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I including applying two coats of existing surface finishes of the building, complete all as specified.

Pressed steel frame of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I including applying two coats of existing surface finishes of the building, complete all as specified.

PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling in pressed steel frame including necessary use and waste of form work etc complete all as specified and as directed

Factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/openning for cooler/AC where required. Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No. CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include for ;- (i) Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/concrete surface. (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames. (iii) PCC block for embedding lugs.

35mm thick 2nd class HW factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply. The size of rail and stile as per IS:1003 (Part-I), all as directed by Engr-in-Charge.

35mm thick 2nd class hard wood glazed, gauzed and skelton shutters open rebeated and prepare to recive glass but devided into square with plain chamfered or rounded mitred and rebated sash bars stiles and rails as specifed in SSR Part-I Sec 8 clause 8.24 (a), complete all as specified.

25mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge.

Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long etc complete all as specified and as directed.

Aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed.

Floor door stopper (140mm overall length of cover plate ) aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor etc complete all as specified and as directed.

Hasp & staple safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws 100mm size etc complete all as specified and as directed.

Butt hinges medium weight cold rolled, mild steel and fixed 50 mm size etc complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall etc complete all as specified and as directed.

225mm, ordinary rat tail rod patttern springs includding roller and roller plate etc complete all as specified and as directed.

Mild steel slliding door bolts, plate type, stove enamelled black with bright bolt not less that 12mm dia with and including a minimum of 6 bolts and nuts for on bolts plate and two on staple plate and fixed 250mm long etc complete all as specified and as directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified.

Sheet glass ordinary quality 3mm thick and glazed with oil putty or any types of beads in square n.exc 0.5 Sqm each pane in any type of frame of Iron/ Steel/ Wood/ Aluminium as requiredat site complete all as specified.

Framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 etc complete all as specified and as directed.

Preparation of new steel surfaces of any description exc. 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer etc complete all as specified and as directed.

Two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

Repairing of concrete surfaces such as balconey, chajjas, upward or downward facias, column, Piller, ceiling and similar items with plain cement concret 1:2:4 type B-0 & rendering any thickiness in CM 1:3 without using extra cement finished even and fair complete all as specified and directed (Up to fourth storey bldgs and including necessary formwork and scaffolding reduired as per site conditions also taking down or dismantiling as required at site).

Preparation of newly plastered surfaces of walls, & applying two coats of oil bound distemper over one coat of approved primer with & including a coat of wall care putty of 2 to 3 mm thick, complete all as specified.

Preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by scraping, washing, rubbing down & stopping etc and applying two coats of oil emulsion distemper over & including a coat of wall care putty of 2 to 3 mm thick, complete all as specified.

Preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint etc complete all as specified and as directed.

Preparing old decorated plastered or unplastered surfaces of wall, pilasters, cornices etc by washing rubbing down & stopping etc and applying one coat of cement base paint complete all as specified and as directed.

Preparing new plastered surface, and applying two coat of white wash on ceiling, complete all as specified.

Preparing old plastered surface of ceiling and applying one coat of white wash complete all as specified and as directed.

Preparation of newly plastered surface and applying two coats of Apex weather paint on wall etc. complete all as specified and directed.

25mm outer dia stainless steel decorative drapery rod ( Model No- SS-25FL of Vista) of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings (Model No:- SS CRNG of Vista) with 50 mm dia and proportionate for part there off, with stainless steel brackets ( Model:- SS 25 BR, Vista) near to ends with stainless steel finials ( Model:- SS-1 of Vista with adapter) for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings), fixed in repair, complete all as specified and directed.

75mm thick PCC 1:3:6 type C-1 using 40mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and fair including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight, complete all as directed.

Dismantling wall and ceilling board (fibre, pulp, insulation, etc) or insulation boards/slab/blankets any thickness including cover fillets, complete all as specified.

6mm thick Non asbestos fibre cement building board fixed or laid on GI framework in ceiling etc complete all as specified and directed by Engr-in-Charge.

Anodised aluminium snap grid (size of grid 605X605mm) frame work for false ceiling and hangers 6mm dia GI (upto 1200mm length) adjustting level fixed to roof slabs by means of celling cleats made out of GI flat 40X 3mm size 60mm long and expansion hold fastners 12.5 mm dia 40mm long complete all as specified and directed.

Dismantling floor, hearth or wall tiling including complete cement mortar bedding, terrazo dado from wall surface removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Glazed ceramic coloured tiles 300mmx200mmx6mm thick fixed on vertical surfaces such as in dado / skirting etc., set and jointed in neat cement slurry and pointed in colour cement over and including 10 mm thick rendering in cement mortar 1:4 etc. complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floor & pavings not exc 15 CM thickness below or above ground level ( reinforcement cut as required to facilitate demolition) etc complete all as specified and as directed.

Precast cement concrete type B-1 using 20 mm graded crushed stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM(1:4) etc , complete all as specified and directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified.

ATT (Anti termite treatment) of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors etc complete all as specified and directed.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed. Note:-Old serviceable switches & MCB shall be taken on charge by the MES for reuse and unsv fittings shall be credited to the contractor.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated and unsheathed heavy duty cable drawn in and including concealed PVC rigid conduit ISI marked after cutting chasis in walls, plaster, after concealing conduit terminated into modular GI flush boxes of suitable sizes including white cover plate with frames & all necessory wall cutting and making good disturbed surface and all items as per the requirement of the work at site for modular fittings, complete all as directed and specified.

One light/fan point controlled by one, one way switch 6 Amp complete all as specified.

One 3 pin socket outlet 6 amp independent complete all as specified.

One 3 pin socket outlet 6 amp on same board complete all as specified.

Description all as per srl item No 68 here in before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Modular switch 1 way 6A, 1 module, (ISI marked), complete all as specified.

Modular Socket, 6A - 2/3 pin combined 2 module, (ISI marked), complete all as specified.

Modular switch 1 way 16A, 1 module, (ISI marked), complete all as specified.

Modular Socket, 6A/16A - 2/3 pin combined 2 module, (ISI marked), complete all as specified.

Modular fan step regulator, 120W - 2 module (ISI marked), complete all as specified.

Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified.

Tube light fitting box type suitable for LED 18-20W tube Rod with end cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18-20LED tube rod 4 feet long complete all as specified and directed. Make:-Crompton Cat Part No:-LTT8-20 for LED tube rod & DMLN1LT8-16 for fittings or Equivalent cat part of make as specified in Appx 'F' here in after. Note :- The LED batten and LED tube rod shall be of same make.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

LED lamp 7W B-22 holder base with polycarbonate body, complete all as specified. Make:- C&S Cat Part No-LTHPLEDLAMP7W/B22 or Equivalent cat part of make as specified in Appx 'F' here in after.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 12 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning with & including taking down old unsv DBs complete all as specified. Make:- LEGRAND cat part No- 5076 22 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 32 amps 240 volts 10 KA 'C' series all as specified. Make:-LEGRAND cat part No- 4086 17 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- LEGRAND cat part No- 4085 87 to 4085 95 or Equivalent cat part of make as specified in Appx 'F' here in after.

Sub main wiring with single core cable 2x 6 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm cancealed PVC rigid conduit / surface PVC casing caping medium grade alongwith 1x 6 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface with & including taking down old unsv sub main wiring of any type, complete all as specified and directed. Note:-2 wire of 6sqmm,1 wire 6 sqmm and one run of pvc conduit shall be measured as one unit.

Taking down of ceiling fan ,dismantling blades and depositing Fan and blades in MES in safe custody of users / store yard of AGE E/M during repair work or refixing in same work if required, complete all as specified & directed.

Vertical distribution board TPN IP 43-'IK 09 with bus bars neutral links blanking plates double door suitable for FP MCB as incommer and out going SP/TP MCBs 4 ways with & including MCCB four pole 125 Amp 415 volts of 16 KA breaking capacity with adjustable thermal, complete all as specified and directed. Make :-INDOASIAN Cat part No :-811870 or equivalent cat part of make as specified in Appx "B" here in after. Note:- MCBs and DBs shall be of same make.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 16 Sqmm x 4 core, complete all as specified.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironincluding PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection pipe, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- Rate for earth lead wire & protection pipe upto 7.5mtr length are inclussive in this item & no extra payment shall be admissible for the same.

Supply and fixing AC single phase 240 Volts 50 HZ ,ceiling fan of size 1200mm Sweep complete in white colour, 5 Star rating with canopy with all accessories incl nuts,bolts,clamps etc. for fixing ceiling fan and provision of flexible copper conductor cable 3 core from ceiling rose to fan including taking down old unsv ceiling fan, complete all as specified and directed. Make :- Havells Cat Part No ES-50 Premium, Crompton Cat Part No Entrust 50 or equivalentas specified in list of make mentioned in Appx 'F'.

Supply & fixing down rod (hanging rod) made out of GI tubing 20mm bore medium grade for length upto 120cm suitable for fixing AC ceiling fan of size 1200mm / 1400mm sweep including orovn of holes for fixing nut & bolts, complete all as specified.

Excavation in trenches in any type of soil not exceeding 1.5m wide and n.exc 1.5 mtr in depth for laying of under ground electric cable and getting out complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified.

Removing excavated surplus materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

Dry river sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts, road crossing etc with fixing clamps, nuts bolts, washer of requrered size if required, complete all as specified.

M/S KRISHNA BUILDERS

M/S Shesh Paul Gupta

M/S shakti steel industries