Karnataka

Active

Works

Other Works

Extension of pipe line from Existing Rising Main to Vandaraguppe Sahukaranakere and Honniganahalli Katte under KDWS in Channapatna taluk

Cauvery Neeravari Nigam Limited

CNNL MP Div Ramanagar | Ramanagara, Karnataka

Amount: ₹79.2 LCloses: 24 Aug 202617 Aug 2026Due tomorrow

Timeline

Published17 Aug 2026
Closes24 Aug 202617 Aug 2026
Bid Opening25 Aug 202618 Aug 2026

Corrigenda

Corrigendum

1 updatesLatest on 17 Aug 202617 Aug 202624 Aug 2026

Updated dates

Bid Submission End24 Aug 202617 Aug 2026Bid Opening25 Aug 202618 Aug 2026Clarification Ends17 Aug 2026

Tender Value

₹79.2 L

EMD Value

₹1.6 L

Closing Date

24 Aug 2026, 4:00 pmDue tomorrow

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

Mohana M N

Office Number

08027271259

Mobile Number

9036100038

Work Description

Extension of pipe line from Existing Rising Main to Vandaraguppe Sahukaranakere and Honniganahalli Katte under KDWS in Channapatna taluk

Tender Information

Tender ID

CNNL/2026-27/OW/WORK_INDENT5307

Reference Number

CNNL/2026-27/OW/WORK_INDENT5307

Tender Type

Open

Product Category

Other Works

Form of Contract

Two Tender Document System(Two Cover)

Location

CNNL MP Div Ramanagar

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredKPWD Registration Certificate of class III and above

RequiredAnnual Turnover Certificate issued by CA for last five years

RequiredWork done Certificate with year wise executed quantity breakup duly certified by The Executive Engineer

RequiredLine of credit certificate in prescribed format

RequiredTender capacity calculation with existing commitments details

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The Intending bidder are advised to visit the site of work and also access the tender documents well in advance

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and Submission of his tender, and the employer will in no case be responsible and liable for those costs.

The TENDER PROCEESING FEE will not be refunded.

The CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons,

If the quoted rates for the items fall below the estimated rates, the successful bidder should produce an additional performance Guarantee in the form of Bank Guarantee for the difference amount of quoted rates and estimated rates before executing agreement with CNNL. In case of contractor quoting rate above 125% of the estimated rates, then the amount over and above 125% will be withheld during the progress of work..

The contractor should be registered in respective class Category of KPWD / Any State / Central Government / Public sector organizations

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

The rates quoted by the contractor must be exclusive of GST and inclusive of sales Tax and any other duties, taxes, etc., The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work.

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval.

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, Manchanabele Project Division, Ramanagara during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events

The work includes all lead and lift / de-lift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height

The intending bidders should note that if any of the land either in part / parts or in whole required for the work is not yet acquired by the Nigama, it shall be the responsibility of the bidder to take possession of such land and start the work by obtaining necessary consent of the land owners before commencement of work at no extra cost to the Nigama and no claim what so ever relating to non-availability of land will be entertained. Any delay in obtaining consent of the land owners shall not be considered for any additional compensation.

The undersigned reserves the right to either postpone or to cancel the entire process of tender

If CNNL wishes to engage third party consultants for quality control assessment, apart from the CNNL quality control and field tests, the contractor should co-operate with both Quality control authorities and the third party

Defect liability period will be 3 Years from the date of completion and satisfactory commissioning

Performance guarantee:- For all works an amount equal to 5.00% of the contract value will be withheld as Performance Guarantee Amount till the expiry of the defect liability period

Building and other construction workers welfare cess

The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate / percentage.

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc.,

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document

The Tenderer should furnish the requisite Earnest Money Deposit

The Tenderer should furnish a copy of the Income Tax Return for the latest financial year

A copy of GST Certificate of the latest financial Year

Employees Provident fund Registration Certificate In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner, EPF However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due to the contractor. Notwithstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities

The necessary certificates / documents in support fulfilling qualification criteria stipulated separately shall be scanned and attached to e-procurement document. The original document shall be produced at the time of opening of tender containing the Technical Bid for verification

The Bidder should also furnish the list of work on hand with all details. Such as bid cost, date of entrustment, stipulated date of completion, actual date of completion, completed cost of work, etc

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer

The intending Bidder/firm/company/ should have man power available with him for taking up above work

The intending Bidder/firm/company/ shall provide evidence that the bidder has been actively engaged in the similar nature of work for at least for a period of 5 years prior to the date of submission of application

The intending Bidder/firm/company/ shall provide accurate information on the related application form about any litigation or Arbitration resulting from contracts completed or on going under its execution over the last five years. The consisting history of awards against the tenderer or any partner of a may result in failure of the application

The intending Bidder/firm/company shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary, the employer shall have the authority to make enquiries with the applicants bankers

Technical Criteria

Past Experience

Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work such as Providing and laying of MS/DI pipe line of value not less than Rs.39.58 Lakhs Note: Work done certificate issued by competent authority not below the rank of Executive Engineer should be furnished Financial turnover & Work done of previous years indicated above shall be given a weightage of 10% per year to bring them to the price level of 2026-27

Work Done Certificate

Executed in any one year the following minimum quantities of work(1) Providing and laying MS/DI pipe of minimum 100mm dia(Rmtr) 1600, Note: Work done certificate with year wise breakup of quantities should be furnished

Work Done Certificate

Capabilities of Vendor

Tenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as underAssessed available tender capacity (AxNx2.5-B) Where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress,N Number of months prescribed for completion of the works for which tenders are invited, B Value at 2026-27 price level, of existing commitments and on-going works to be completed during the next 90 days.

Others -- Tender Capacity Calculation with Existing Commitments details

Financial Status

Achieved in at least two financial years an average annual financial turnover (in all classes of Civil Engineering construction works) only of Rs.79.15 Lakhs Note : Turnover certificate duly certified by Chartered accountant along with audited balance sheets should be furnished

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs 23.75Lakhs (Credit lines/ letter of credit/ certificates from scheduled / nationalized banks for meeting the fund requirement etc.) in the prescribed format

Line of Credit

Others

Not Applicable

Others -- Not Applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Fee & Financial Details

Tender Fee Amount

₹1,980

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

24 Aug 2026

Published

17 Aug 2026

Bid Opening

25 Aug 2026

Download Ends

17 Aug 2026

Clarification Period

17 Aug 2026

BOQ Preview

•

Extension of pipe line from Existing Rising Main to Vandaraguppe Sahukaranakere and Honniganahalli Katte under KDWS in Channapatna taluk

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out,construction of shoring, strutting, barricading...

•

Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect l...

•

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE ofvariouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft ...

•

Providing and fixing Wafer type single flange Butterfly valve conformingto relevant IS 13099/9991 EN GGG40/50 with latest amendments asdetailed below of the following diameter and types with TP set an...

•

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

•

Providing Ductile Iron Push on special confirming to IS 9523:2000 -Double Socketed with flanged Branch D.I. Un-Equal Tees complete with all lead and lifts and as directed by the engineer in charge 350...

•

Providing Ductile Iron Push on special confirming to IS 9523:2000 - All D.I. Flanged MJ COLLAR complete. as per the directions of the Engineer-in-charge of the work 350mm

•

Providing Ductile Iron Push on special confirming to IS 9523:2000 complete. as per the directions of the Engineer-in-charge of the work 200mm diameter 22.50 degree

•

Providing Ductile Iron Push on special confirming to IS 9523:2000 complete. as per the directions of the Engineer-in-charge of the work 200mm diameter 45 degree

•

Providing Ductile Iron Push on special confirming to IS 9523:2000 complete. as per the directions of the Engineer-in-charge of the work 150mm diameter 22.50 degree

•

Providing Ductile Iron Push on special confirming to IS 9523:2000 complete. as per the directions of the Engineer-in-charge of the work 150mm diameter 45 degree

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including settingout, shoring, strutting, barricading, caution lig...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

5307 KW 3.doc

Tender Document • 5.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].