Construction of G.I Barbed Wire Fencing and DRSM Work in Co. 9-10/P of Panchari Range

Amount

Fencing Work (S.no 1 to 12) : Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees and saplings of girth upto 30cm measured at height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared

Excavation work in excavation by manual means for foundation, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts wells cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 m including the disposal of excavated eath upto 1 m from the cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil.

Providing and Laying in position Cement concrete of specified grade excluding cost of centering, shuttering, All work up to plinth level in 1:5:10(1cement : 5coarse sand: 10 graded stone agg. 40mm nominal size) (Crushed)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4(1 cement: 2 coarse sand :4 graded stone aggregate 40mm nominal size) Crushed.

Centering and shuttering including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete

Finishing walls with water proofing cement paint of required shade on new work (two or more coats applied).

Supply of precast cement conc. poles of size 100mmx100mmx1800mm(including carriage)

Erecting c.conc. Poles in position.

1.2m high fencing with 1.8m R.C.C.posts of standard design placed every 3m apart, embedded in cement concrete blocks, provided with 5 horizontal lines and two diagonals of barbed wire 9.38 kg per 100 metres (min) between the two posts fitted and fixed with G.l. staples on wooden plugs or G.l. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts,struts,earth work and concrete to be paid for separately): With G.l. barbed wire..

Supply of Barbed wire incl. all carriagee.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works with iron angle 40x40x6mm and flat 40x6mm.

Sign board incl carriage PAINTING &WRITING COMPLETE JOB. Os Size: 5.00 x 3.00 Ft with vertical iron angle 2 Nosof size 40x40x6 mm iron angle of height 7 ft with 1 mm thick M.S sheet.

DRSM Work The carriage of stones from nearby area for construction of DRSM Works. Dressing of stones and preparation of beds in the nallahs, Construction of DRSM and making proper spill way.

omprakash

Ankush Khajuria

Vijay Bharat Gandhi Contractor