Perur Town Panchayat - Coimbatore District - SBM 2.0 - Community Toilet repair

Amount

Supplying and fixing of Indian type water closet of 580x440mm size Colour glazed earth and ware with P or S trap including cost and conveyance Complete complying with standard specifications and as directed by the departmental Engineers.

Fabricating, supplying and fixing in positon of SOLID PVC DOORS with frames of different sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multichamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configruation of an "A" section for shutter frames and multi-chamber hollow plastic section of 200 mm *200 mm*1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dimantling the masnery, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the departmental officers.

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:2 mix pointing the joints with colour pigments etc. Complete.

Supplying and Painting the wall with two coats of cement Paint Over One Coat of cement primer as instructed by the departmental officers including preparation of surfaces curing etc.,complete

Earthwork excavation and depositing and bank with Initial Lead and lift gravelly soil and all classess of soil including all labour charges as per SS 20 B and as per standard specification.

Cement concrete of mix 1:4:8 (one cement four sand and eight couse aggregate) using hard broken granite stone jelly of 40 mm gauge for foundation levelling course, including shuttering, dewatering wherever necessary and laid I layers of not more than 15cm thick complete complying with standard specifications and drawings and as directed by the departmental Engineers including all cost & conveyance of materials laying curing etc., complete

Brick Masonry (one or more bricks thick) in cement mortar 1:5 (one cement and five sand) of the following proportions in foundations, basement and superstructure walls using country bricks of size 22cm x 11cm x 5 cm having crushing strength of not less than 70 kg. per square centimeter) complying with standard specifications and drawings and as directed by departmental Engineers.

Plastering 12 mm thick with cement mortar 1:5 mix of the following proportions at all heights and depths above or below plinth level including scaffolding curing etc. complete complying with standard specifications and drawings and as directed by Departmental Engineers.

Plastering 20 mm thick with cement mortar 1:5 mix of the following proportions at all heights and depths above or below plinth level including scaffolding curing etc. complete complying with standard specifications and drawings and as directed by Departmental Engineers.

Supplying and erecting in the position of centering for sides and soffits including necessary supports and strutting upto 3.00 m high for plain surfaces with all cross bracings using mild steel sheet of 90 cm x 60 cm and or suitable size stiffened with welded-mild steel angle of size 25mmx25mmx3 mm for boarding laid over silver oax (country wood) joists of size 10 cm x 6.5 cm spaced at about 90 cm centre to centre and supported by casurina props 10 cm to 13 cm dia spaced at about 75 cm center to center etc. complete complying with standard specifications and as directed the departmental office for RCC slabs, rectangular beams, Tee or Ell beams, Lintels bed blocks, staircase waist slab and landing slab, landing beams canopy etc.

Supplying, Fabricating and placing in position mild steel or deformed steel bars for all reinforced cement concrete items of work including cost of steel transporting straightening cutting, bending, cranking binding welding etc. Including cost of binding wire MS.chairs laps to fix the reinforcement in all positions, all labour and materials complete complying with standard specifications and drawings and as directed by the departmental Engineers.

Supplying and laying reinforced cement concrete of mix 1:1.5:3 (one cement one & half sand and three aggregate) using machine crushed hard broken granite stone jelly 20 mm gauge for RCC works in all types of foundation footings rafts, columns floor, beams, slabs of all shapes (excluding cost of providing centering and fabrication of reinforcements which shall be measured and paid under separate items but including curing etc. and including fixing fan clamps or hooks, after laying of Electrical conduct pipes, junction boxes wherever required etc. complete complying with standard specifications and drawings and as directed by departmental Engineers.

Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

DIVYA BUILDERS (BID ID -1156248)