Providing Fixing and Charging The Mini High Mast At Margamma Temple Ward no.16 In Bilagi Town.

Providing Fixing and Charging The Mini High Mast At Margamma Temple Ward no.16 In Bilagi Town.

Earth work excavation by manual means for drains,canals and similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, c...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding ...

Fabricating, supplying and erecting Swaged tubular Pole of height...m having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved quali...

Supplying and fixing of HOT dip galvenised M.S Bracket suitable for out door luminaire and shall be mounted on octogonal/conical pole using necessery bolts, nuts etc., complete 1) standerd as Single ...

Supplying of 1.1kv LT UG Cable having Having alluminium conductor PVC insulated extruded inner sheathed galvenised steel strip (except 2C X10 Sqmm wire armoured )confirming to IS 3975:1990 (No of ...

supplying and drawing flexible multi core cable manufactured with electrolytic grade copper with flexible copper conductor confirming to IS 8130-1984 and (Virgin) pvc insulation sheat headsy suitable ...

Digging of trench of 0.6m deep x 0.50 mtr wide reffilling the trench to the required ground level and consolidating etc., complete ( As per Civil SR KSRB 1-2, P-7) Road surface cutting

Labour charges for laying of 1.1 KV class UG cable in esisting trnch GI pipe/ stoneware pipe /on wall /on pole as required. 1) In esisting trench/duct. Of 25sqmm to 75sqmm. 7.8.2 -- 61

Supplying and fixing L.T cast Iron pot heads suitable for 1-1 KV class UG cable filled with necessary bitumen/ insulatin compound complete with terminals, clamps , bolts, nuts , and washers etc. c) ...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the fallowing sizes 25 sqmm Long barrel

Supply and laying Double walled corrugated (DWC)HDPE pipe including pipe including all necessary Sockets /Coupling /Tess / Bends/End caps of same materials in existing trench as per IS 14930 Part-I...

Supplying and fixing , wiring , eart electrode for grounding conduits, IC cutouts and other equpments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit… the pit sho...

Supplying and fixing wiring Earth leakage Miniature Circuit Braker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/ panel board 6.18 p47 HPl/ Havells/ ABB/ Indoasian/ Anchor/ Bajaj/ Philips/...

Fabricating, supplying and Mounting MS box made out (a) 14SWG suitable for floor/ wall mounting, fully weather proof with provision for better heat dissipation provided with hinged fornt cover, eqio[[...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supplying ,fixing and wiring with sutable rubber washers UG cable glands 25 mm SL no 431Schedule of Rates for Electrical Works for 2019-20

Supplying ,fixing and wiring with sutablebituminous compound Pot Head size 25/35 sqmm25 mm SL no 432 Schedule of Rates for Electrical Works for 2019-20

supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood /panel board using nessessary screws nuts washers and wiring etc complete with ac-3 rating IS-13947. PWD CSR 2023-24 ...

fixing of halogen /metal/svl /il /led/ floodlight fitting over existing pole/wall ceiling including clamps bolts nuts and wiring using suitable capacity wires PWD CSR 2023-24 I.No.13.5, P.No. 56