Repair to various regulatory gates on distributaries falling in Domana area of Main Ranbir Canal

Amount

Gate at Distributory 3D (2’X8’) Annual repair/maintenance of the gate of Distributory 3D of main Ranbir Canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gates by means of chain pulley block, tripod stand and manual labour. Repairs to the gate by means of cleaning of gate and removal of silt deposited on the gate leaf and then welding of broken joints, repairs to gate wedge support, welding gate leaf at damaged places by way of providing/fitting of M.S sheet of 6mm thickness of requisite size. Also repair to the gate frame by providing/fitting of ISMC 75x40mm as support by way of cutting /welding at site using superior quality electrodes. Scrubbing and removal of old rust and then applying two coats of anticorrosive paint on both side of the gate. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of one no. pinion gear set, new set of nuts and bolts for mounting the gate on end of stem rod, straightening of the tilted stem rod and rethreading of the same. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surface and then complete assembling of winch machine along with support lugs on the ISMC platform by means of providing and fitting of nuts ,bolts and gate rubber seals as per the size of the gate. Job also includes application of two coats of anti-corrosive paint on all surfaces. Complete Job includes cost of material, tools and tackles charges, skilled/semi-skilled labour hire charges, hiring and carriage charges of welding set to site, hire charges of chain pulley block and tripod stand. C/job Gate at Distributory 3E (1’-6”X3’-6’’) Annual repair/maintenance of the gate of Distributory 3E of main Ranbir Canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gates by means of chain pulley block, tripod stand and manual labour. Repairs to the gate by means of cleaning of gate and removal of silt deposited on the gate leaf and then welding of broken joints, repairs to gate wedge support, welding gate leaf at damaged places. Also repair to the gate frame support by way of cutting/welding at site using superior quality electrodes. Scrubbing and removal of old rust and then applying two coats of anticorrosive paint on both side of the gate. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of worm gear set, new set of nuts and bolts for mounting the gate on end of stem rod, straightening of the tilted stem rod and rethreading of the same. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surface and then complete assembling of winch machine along with support lugs on the ISMC platform by means of providing and fitting of nuts ,bolts and gate rubber seals as per the size of the gate. Job also includes application of two coats of anti-corrosive paint on all surfaces. Complete Job includes cost of material, tools and tackles charges, skilled/semi-skilled labour hire charges, hiring and carriage charges of welding set to site, hire charges of chain pulley block and tripod stand. C/job Gate at Distributory 4A Army Camp (3’X2’) Annual repair/maintenance of the gate of Distributory 4A of main Ranbir Canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gates by means of chain pulley block, tripod stand and manual labour. Repairs to the gate by means of cleaning of gate and removal of silt deposited on the gate leaf and then welding of broken joints, repairs to gate wedge support, welding gate leaf at damaged places. Also repair to the gate frame support channel by way of cutting/welding at site using superior quality electrodes. Scrubbing and removal of old rust and then applying two coats of anticorrosive paint on both side of the gate. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of worm gear set, new set of nuts and bolts for mounting the gate on end of stem rod, straightening of the tilted stem rod and rethreading of the same. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surface and then complete assembling of winch machine along with support lugs on the ISMC platform by means of providing and fitting of nuts ,bolts and gate rubber seals as per the size of the gate. Job also includes application of two coats of anti-corrosive paint on all surfaces. Complete Job includes cost of material, tools and tackles charges, skilled/semi-skilled labour hire charges, hiring and carriage charges of welding set to site, hire charges of chain pulley block and tripod stand. C/job Gate at Distributory 4C machine Domana (1’-4’’X1-’4’’) Annual repair/maintenance of the gate of Distributory 4C of main Ranbir Canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gates by means of chain pulley block, tripod stand and manual labour. Repairs to the gate by means of cleaning of gate and removal of silt deposited on the gate leaf and then welding of broken joints, repairs to gate wedge support, welding gate leaf at damaged places. Also repair to the gate frame support by way of cutting/welding at site using superior quality electrodes.Repairs to winch machine by way of providing/fitting of new set of bearings.Scrubbing and removal of old rust and then applying two coats of anticorrosive paint on both side of the gate. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of worm gear set, new set of nuts and bolts for mounting the gate on end of stem rod, straightening of the tilted stem rod and rethreading of the same. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surface and then complete assembling of winch machine along with support lugs on the ISMC platform by means of providing and fitting of nuts ,bolts and gate rubber seals as per the size of the gate. Job also includes application of two coats of anti-corrosive paint on all surfaces. Complete Job includes cost of material, tools and tackles charges, skilled/semi-skilled labour hire charges, hiring and carriage charges of welding set to site, hire charges of chain pulley block and tripod stand. C/job Gate at Distributory 4D Nag Bani (3’X7”) Annual repair/maintenance of the gate of Distributory 4D of main Ranbir Canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gates by means of chain pulley block, tripod stand and manual labour. Repairs to the gate by means of cleaning of gate and removal of silt deposited on the gate leaf and then welding of broken joints and gate leaf by way of providing/fitting of M.S sheet of 6mm thickness of requisite size. Also repair to the gate frame support by way of cutting/welding at site using superior quality electrodes.Repairs to winch machine by way of providing/fitting of new set of bearings.Scrubbing and removal of old rust and then applying two coats of anticorrosive paint on both side of the gate. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of worm gear set, new set of nuts and bolts for mounting the gate on end of stem rod, straightening of the tilted stem rod and rethreading of the same. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surface and then complete assembling of winch machine along with support lugs on the ISMC platform by means of providing and fitting of nuts ,bolts and gate rubber seals as per the size of the gate. Job also includes application of two coats of anti-corrosive paint on all surfaces. Complete Job includes cost of material, tools and tackles charges, skilled/semi-skilled labour hire charges, hiring and carriage charges of welding set to site, hire charges of chain pulley block and tripod stand. C/job Gate at Distributory 5B Barnai (2’X4”) Annual repair/maintenance of the gate of Distributory 5B of main Ranbir Canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gates by means of chain pulley block, tripod stand and manual labour. Repairs to the gate by means of cleaning of gate and removal of silt deposited on the gate leaf and then welding of gate leaf by way of providing/fitting of M.S sheet of 6mm thickness of requisite size. Also repair to the gate frame supports by way of cutting/welding at site using superior quality electrodes.Repairs to winch machine by way of providing/fitting of new set of bearings.Scrubbing and removal of old rust and then applying two coats of anticorrosive paint on both side of the gate. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of worm gear set, new set of nuts and bolts for mounting the gate on end of stem rod, straightening of the tilted stem rod and rethreading of the same. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surface and then complete assembling of winch machine by means of providing and fitting of nuts ,bolts and gate rubber seals as per the size of the gate. Job also includes application of two coats of anti-corrosive paint on all surfaces. Complete Job includes cost of material, tools and tackles charges, skilled/semi-skilled labour hire charges, hiring and carriage charges of welding set to site, hire charges of chain pulley block and tripod stand. C/job Gate at Distributory 5C Rajouri Lines (2’X2-6”) Annual repair/maintenance of the gate of Distributory 5C of main Ranbir Canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gates by means of chain pulley block, tripod stand and manual labour. Repairs to the gate by means of cleaning of gate and removal of silt deposited on the gate leaf and then welding of old broken joints and gate leaf by way of providing/fitting of M.S sheet of 6mm thickness of requisite size. Also repair to the gate frame support by way of cutting/welding at site using superior quality electrodes.Repairs to winch machine by way of providing/fitting of new set of bearings.Scrubbing and removal of old rust and then applying two coats of anticorrosive paint on both side of the gate. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of new set of nuts and bolts for mounting the gate on end of stem rod, straightening of the tilted stem rod and rethreading of the same. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surface and then complete assembling of winch machine along with support lugs on the ISMC platform by means of providing and fitting of nuts ,bolts and gate rubber seals as per the size of the gate. Job also includes application of two coats of anti-corrosive paint on all surfaces. Complete Job includes cost of material, tools and tackles charges, skilled/semi-skilled labour hire charges, hiring and carriage charges of welding set to site, hire charges of chain pulley block and tripod stand. C/job Gate at Distributory 7A Poonch Lines (3’X3-6”) Annual repair/maintenance of the gate of Distributory 7A of main Ranbir Canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gates by means of chain pulley block, tripod stand and manual labour. Repairs to the gate by means of cleaning of gate and removal of silt deposited on the gate leaf and then welding of broken joints and gate leaf by way of providing/fitting of M.S sheet of 6mm thickness of requisite size. Also repair to the gate frame support by way of cutting/welding at site using superior quality electrodes.Repairs to winch machine by way of providing/fitting of new set of bearings.Scrubbing and removal of old rust and then applying two coats of anticorrosive paint on both side of the gate. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of pinion gear set, new set of nuts and bolts for mounting the gate on end of stem rod, straightening of the tilted stem rod and rethreading of the same. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surface and then complete assembling of winch machine along with support lugs on the ISMC platform by means of providing and fitting of nuts ,bolts and gate rubber seals as per the size of the gate. Job also includes application of two coats of anti-corrosive paint on all surfaces. Complete Job includes cost of material, tools and tackles charges, skilled/semi-skilled labour hire charges, hiring and carriage charges of welding set to site, hire charges of chain pulley block and tripod stand. C/job Gate at Distributory 83000 escape channel (10’X8’) Repairs to gate 83000 escape Channel on main Ranbir canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gates by means of hydraulic crane and manual labour. Carriage/shifting of the dismantled gate to the workshop for carrying out necessary repairs by loading in the transport vehicle.Repair to the gate by means of cleaning of gate and removal of silt deposited on the gate leaf and then welding of broken joints, repairs to gate wedge support, welding gate leaf at damaged places by way of providing/fitting of M.S sheet of 6mm thickness of requisite size. Also repair to the gate frame by providing/fitting of ISMC 75x40mm as two no. vertical and one no. horizontal member supports by way of cutting /welding using superior quality electrodes, straightening of the tilted stem rod and rethreading of the same. Scrubbing and removal of old rust and then applying two coats of anticorrosive paint on both side of the gate. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of new set of bearings, worm, nuts and bolts for mounting the gate on end of stem rod. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surface and then complete assembling of winch machine along with support lugs on the ISMC platform by means of providing and fitting of gate rubber seals as per the size of the gate. Job also includes application of two coats of anti-corrosive paint on all surfaces. Complete Job includes cost of material, tools and tackles charges, skilled / semi-skilled labour hire charges, hiring and carriage charges of hydraulic crane, welding set to site. C/job Gate at DistributoryBhadrore Minor (3'-8"X3'-6") Annual repair/maintenance of the gate of DistributoryBhadrore minor of main Ranbir Canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gates by means of chain pulley block, tripod stand and manual labour. Repairs to the gate by means of cleaning of gate and removal of silt deposited on the gate leaf and then welding of broken joints and gate leaf by way of providing/fitting of M.S sheet of 6mm thickness of requisite size. Also repair to the gate frame support by way of cutting/welding at site using superior quality electrodes.Repairs to winch machine by way of providing/fitting of new set of bearings.Scrubbing and removal of old rust and then applying two coats of anticorrosive paint on both side of the gate. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of worm gear set, new set of nuts and bolts for mounting the gate on end of stem rod, straightening of the tilted stem rod and rethreading of the same. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surface and then complete assembling of winch machine along with support lugs on the ISMC platform by means of providing and fitting of nuts ,bolts and gate rubber seals as per the size of the gate. Job also includes application of two coats of anti-corrosive paint on all surfaces. Complete Job includes cost of material, tools and tackles charges, skilled/semi-skilled labour hire charges, hiring and carriage charges of welding set to site, hire charges of chain pulley block and tripod stand. C/job Distributory D1 head (5’ x 6’) Annual periodical maintenance of the Gate of D-1 headof size 5’x 6 ‘by way of dismantling of manually operated winch machine by unscrewing/cutting of rusted nuts and bolts, extracting out the front plate of the winch machine. Unscrewing the rain protection pipe and the dismantling the top cover plate of winch machine. Extracting the gear mechanism and stem rod and cleaning the gear mechanism with appropriate cleaning agent. Checking of stem rod for its straightness and rethreading of the same. Assembling back the winch machine after greasing it properly. Connecting the stem rod to the gate structure and applying of grease to its threads. Lifting the gate to its maximum height to apply the grease to the sliding grooves. Providing & fitting of new nut, bolts & washers. Cleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure and winch machine with one coat of anticorrosive primer and two coats of superior quality paint. Oiling/greasing of the movable parts. Checking the up and down movement of the gate. Complete job includes cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work. C/Job Distributory 2B Bawatalab (3’-6” x 3’-6”) Annual periodical maintenance of the Gate of Distributory 2B Bawatalab of size 3’-6” x 3’-6”by way of dismantling of manually operated winch machine by unscrewing/cutting of rusted nuts and bolts, extracting out the front plate of the winch machine. Unscrewing the rain protection pipe and the dismantling the top cover plate of winch machine. Extracting the gear mechanism and stem rod and cleaning the gear mechanism with appropriate cleaning agent. Checking of stem rod for its straightness and rethreading of the same. Assembling back the winch machine after greasing it properly. Connecting the stem rod to the gate structure and applying of grease to its threads. Lifting the gate to its maximum height to apply the grease to the sliding grooves. Providing & fitting of new nut, bolts & washers. Cleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure and winch machine with one coat of anticorrosive primer and two coats of superior quality paint. Oiling/greasing of the movable parts. Checking the up and down movement of the gate. Complete job includes cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work. C/Job Distributory 3B Dhayaran (1’-6” x 8’) Annual periodical maintenance of the Gate of Distributory3B Dhayaranby way of dismantling of manually operated winch machine by unscrewing/cutting of rusted nuts and bolts, extracting out the front plate of the winch machine. Unscrewing the rain protection pipe and the dismantling the top cover plate of winch machine. Extracting the gear mechanism and stem rod and cleaning the gear mechanism with appropriate cleaning agent. Checking of stem rod for its straightness and rethreading of the same. Assembling back the winch machine after greasing it properly. Connecting the stem rod to the gate structure and applying of grease to its threads. Lifting the gate to its maximum height to apply the grease to the sliding grooves. Providing & fitting of new nut, bolts & washers. Cleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure and winch machine with one coat of anticorrosive primer and two coats of superior quality paint. Oiling/greasing of the movable parts. Checking the up and down movement of the gate. Complete job includes cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work. C/Job Distributory 5A Patoli (2’-6” x 2’) Annual periodical maintenance of the Gate of Distributory5APatoliby way of dismantling of manually operated winch machine by unscrewing/cutting of rusted nuts and bolts, extracting out the front plate of the winch machine. Unscrewing the rain protection pipe and the dismantling the top cover plate of winch machine. Extracting the gear mechanism and stem rod and cleaning the gear mechanism with appropriate cleaning agent. Checking of stem rod for its straightness and rethreading of the same. Assembling back the winch machine after greasing it properly. Connecting the stem rod to the gate structure and applying of grease to its threads. Lifting the gate to its maximum height to apply the grease to the sliding grooves. Providing & fitting of new nut, bolts & washers. Cleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure and winch machine with one coat of anticorrosive primer and two coats of superior quality paint. Oiling/greasing of the movable parts. Checking the up and down movement of the gate. Complete job includes cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work. C/Job Distributory D6 Muthi (2’-8” x 2’) Annual periodical maintenance of the Gate of DistributoryD6Muthiby way of dismantling of manually operated winch machine by unscrewing/cutting of rusted nuts and bolts, extracting out the front plate of the winch machine. Unscrewing the rain protection pipe and the dismantling the top cover plate of winch machine. Extracting the gear mechanism and stem rod and cleaning the gear mechanism with appropriate cleaning agent. Checking of stem rod for its straightness and rethreading of the same. Assembling back the winch machine after greasing it properly. Connecting the stem rod to the gate structure and applying of grease to its threads. Lifting the gate to its maximum height to apply the grease to the sliding grooves. Providing & fitting of new nut, bolts & washers. Cleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure and winch machine with one coat of anticorrosive primer and two coats of superior quality paint. Oiling/greasing of the movable parts. Checking the up and down movement of the gate. Complete job includes cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work. C/Job Distributory 7B Muthi camp (1’-6” x 2’) Annual periodical maintenance of the Gate of Distributory7BMuthi campby way of dismantling of manually operated winch machine by unscrewing/cutting of rusted nuts and bolts, extracting out the front plate of the winch machine. Unscrewing the rain protection pipe and the dismantling the top cover plate of winch machine. Extracting the gear mechanism and stem rod and cleaning the gear mechanism with appropriate cleaning agent. Checking of stem rod for its straightness and rethreading of the same. Assembling back the winch machine after greasing it properly. Connecting the stem rod to the gate structure and applying of grease to its threads. Lifting the gate to its maximum height to apply the grease to the sliding grooves. Providing & fitting of new nut, bolts & washers. Cleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure and winch machine with one coat of anticorrosive primer and two coats of superior quality paint. Oiling/greasing of the movable parts. Checking the up and down movement of the gate. Complete job includes cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work. C/Job Distributory 7C BSF School (1’-6” x 3’) Annual periodical maintenance of the Gate of Distributory7CBSF Schoolby way of dismantling of manually operated winch machine by unscrewing/cutting of rusted nuts and bolts, extracting out the front plate of the winch machine. Unscrewing the rain protection pipe and the dismantling the top cover plate of winch machine. Extracting the gear mechanism and stem rod and cleaning the gear mechanism with appropriate cleaning agent. Checking of stem rod for its straightness and rethreading of the same. Assembling back the winch machine after greasing it properly. Connecting the stem rod to the gate structure and applying of grease to its threads. Lifting the gate to its maximum height to apply the grease to the sliding grooves. Providing & fitting of new nut, bolts & washers. Cleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure and winch machine with one coat of anticorrosive primer and two coats of superior quality paint. Oiling/greasing of the movable parts. Checking the up and down movement of the gate. Complete job includes cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work. C/Job Distributory 7D Paloura (3’-6” x 3’-6”) Annual periodical maintenance of the Gate of Distributory7DPalouraby way of dismantling of manually operated winch machine by unscrewing/cutting of rusted nuts and bolts, extracting out the front plate of the winch machine. Unscrewing the rain protection pipe and the dismantling the top cover plate of winch machine. Extracting the gear mechanism and stem rod and cleaning the gear mechanism with appropriate cleaning agent. Checking of stem rod for its straightness and rethreading of the same. Assembling back the winch machine after greasing it properly. Connecting the stem rod to the gate structure and applying of grease to its threads. Lifting the gate to its maximum height to apply the grease to the sliding grooves. Providing & fitting of new nut, bolts & washers. Cleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure and winch machine with one coat of anticorrosive primer and two coats of superior quality paint. Oiling/greasing of the movable parts. Checking the up and down movement of the gate. Complete job includes cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work. C/Job Distributory D8 Bakshi Nagar Pul (3’-6” x 4’) Annual periodical maintenance of the Gate of DistributoryD8Bakshi Nagar Pulby way of dismantling of manually operated winch machine by unscrewing/cutting of rusted nuts and bolts, extracting out the front plate of the winch machine. Unscrewing the rain protection pipe and the dismantling the top cover plate of winch machine. Extracting the gear mechanism and stem rod and cleaning the gear mechanism with appropriate cleaning agent. Checking of stem rod for its straightness and rethreading of the same. Assembling back the winch machine after greasing it properly. Connecting the stem rod to the gate structure and applying of grease to its threads. Lifting the gate to its maximum height to apply the grease to the sliding grooves. Providing & fitting of new nut, bolts & washers. Cleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure and winch machine with one coat of anticorrosive primer and two coats of superior quality paint. Oiling/greasing of the movable parts. Checking the up and down movement of the gate. Complete job includes cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work. C/Job Dub DittaKhul (2’-6” x 2’-6”) Annual periodical maintenance of the Gate of DistributoryDub DittaKhulby way of dismantling of manually operated winch machine by unscrewing/cutting of rusted nuts and bolts, extracting out the front plate of the winch machine. Unscrewing the rain protection pipe and the dismantling the top cover plate of winch machine. Extracting the gear mechanism and stem rod and cleaning the gear mechanism with appropriate cleaning agent. Checking of stem rod for its straightness and rethreading of the same. Assembling back the winch machine after greasing it properly. Connecting the stem rod to the gate structure and applying of grease to its threads. Lifting the gate to its maximum height to apply the grease to the sliding grooves. Providing & fitting of new nut, bolts & washers. Cleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure and winch machine with one coat of anticorrosive primer and two coats of superior quality paint. Oiling/greasing of the movable parts. Checking the up and down movement of the gate. Complete job includes cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work. C/Job

Rebate on Old Parts

Vaibhav Engineers and Technocrates

R M ENTERPRISES