SPECIAL REPAIRS OF BHEESHMA BLOCK ( BUILDING NO T-39) AT INS CHILKA UNDER GE CHILKA

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified and directed by Engineer-in-Charge

All as per item No1 above but exceeding 1.5 Sqm and not exceeding 4 Sqm each.

S & F Pressed steel frames size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed

S & F Pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed

S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood panels, and both faces covered with decorative veneer with lipping/frame to match complete all as specified and as directed

S&F brass Mortice lock, 4 levers vertical type of size 65mm complete all as specified and as directed

S& F standard aluminium door seal with nylon brudh (minium length 1.2m) at lower side to fit at the bottom of door shutter with screws complete all as specified and as directed.

S & F door eye or magic eye security device for entrance door complete all as specified and as directed

S & F Magnetic catch latch for cup board complete all as specified and as directed

S & F aluminium (extruded section) body door closer hydraulically regulated designation No-3 , universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S & F butt hinges,medium weight cold rolled mild steel of 75 mm supply only

S & F in repairs 18 mm thick plywood, grade BWR type BB fixed with screws to timber frame work as in cub bd and cup bd shelve ,shutter complete all as specified and as directed.

M & L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive asper manufacturer's instructions complete all as specified and as directed.

M & L for external teak wood lipping 6mm thick fixed with nails for 18mm thick board complete all as specified and as directed

S & F in repair 100 mm long Brass handles cast type, polished bright complete all as specified and as directed

S & F in repairs 150 mm long Brass handles cast type, polished bright complete all as specified and as directed

S & F in repairs Hasp and Staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 100 mm size

S & F Solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet reinforced with MS squaretube, complete all as specified and as directed

S & F Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick moulded prelaminated PVC sheet on front face and 2mm prelam PVC sheet on back face in frame at site as per specification & drawin complete all as specified snd as directed

S&F Aluminium barrel tower bolts of extruded sections of size 150 mm.

S&FAluminium barrel tower bolts of extruded sections of size 125 mm.

S & F 140mm length floor door stopper of aluminium alloy body and tougue, anodised, with with rubber shoe complete all as specified

Taking down existing waterproofing treatment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100M and S & F water proofing treatment to roof as per per manufacturer's instructions with the following specification:-. (a) 15 mm thick plastering in cement mortar 1:4 mixed with and including water proofing compound @3% by weight of cement including preperation of roof surfaces. (b) Applying evenly a coat of bitumineous primer @ 0.5 litre per Sqm (c) Applying evenly a coat of hot blow bitumen 85/25 grade @ 1.2 Kg per Sqm (d) Applying APP based polymeric membrane minimum 3 mm thick and minimum weighing 3kg/sqm laid on primed surface by LPG forced torch application with a side & end overlaps of minimum 100 mm. (e) Applying evenly a coat of hot blown bitumen 85/ 25 grade @ 1.2 Kg per Sqm over water proofing membrane (f) Applying a coat of bituminous based aluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturer's instructions complete all as specified and as directed.

Supply only water proofing compound.

Demolition of brick work/stone masonry built in cement mortar and removal of rubbish from site complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:6.

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4)

Taking down & Refixing old 20mm dia bore of steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed by Engr-in-Charge.

ditto- all as per above item but 15mm bore

S&F in repairs 20 mm bore galvanized medium grade tubing fixed / laid in trenches along walls / celing etc complete all as specified and directed by Engr-in -charge.

S&F in repairs 15 mm bore medium grade GI tubing including all fittings and fixed in position to walls, ceiling or under floors etc complete all as specified and directed by Engr-in -charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls

Dismantling of floor, hearth or wall tiles including bedding coat and debris off from the site complete all as specified & directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level)

M&L for Vitrified Ceramic tiles 10/9 mm thick Double charged (square/ rectangular) polished, area of each tiles exceeding 0.36sqm but not exceeding 0.42 Sqm , in floors and skerting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over & including 15mm thich Screed bed in 1:4 etc all complete.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm(Size of tiles 300mmx300mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15mm thick in CM 1:4 complete all as specified

M&L for glazed coloured ceramic tiles in vertical surface 450 x 300 x 6to7 mm thick set and jointed in neat cement slurry and pointed in colour cement to match fixed over and including 10mm thick rendering in cement mortar 1:4 complete all as specified

M & L for 75mm thick PCC type C2 1:3:6 (40mm garade aggregate) as in plinth protection finished even and smooth making bituminous joint as specified complete all as specified and directed

Taking down cement plaster and the like from brick or stone wall and concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc., complete all as specified.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4, including finishing even and fair without using extra cement, complete all as specified.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6, including finishing even and smooth without using extra cement, complete all as specified.

M &L for preparation of new plaster surface and applying two coats of distemper oil emultion on new wall surfaces and including treating with 1mm thick wall care putty and a coat of primer, white or tinted complete all as specified and directed

M&L for applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of silver steak shade of asian paint over a coat of primer on prepared external new surfaces of walls of any description over 10 cm width/girth etc on column/pillars , RCC chajja and facia approved colour all as specified.

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Supply and fixing factory made UPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F4.8 mm thick Sheet glass, exc 0.5 Sqm each pane in ordinary quality in aluminium window including necessary fixing arrangement complete all as specified and as directed.

S & F4.8 mm thick Sheet glass, exc 0.5 Sqm each pane frosted one side for window/ventilator shutter in aluminium window including necessary fixing arrangement complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white (excld flushing cistern & Pipe) including connection to trap and flushing pipe complete all as specified & directed.

S&F in repairs CP fancy type hand faucet with hose & hook for EWC including all necessary fitting complete all as specified.

S&F in repairs PVC (EWC)seat cover white colour with flat bottom including CP hinges complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltr capacity including provision of inlet, outlet overflow and wash out connections and taking down the unserviceable tank complete all as specified and as directed including cover

S&F in repairs Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms)

S&F in repair PVC low level flushing cistern of 10 ltr capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts and washers for 600mm long pipe complete all as specified and directed.

S&F in repairs 100 mm dia PTMT grating doom (min. weight 25 gms) complete all as specified and directed.

S&F in repair angular stop cock concealed type of 15mm dia cast copper alloy chorimum plated screwed down high presure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed. Make : Jaquar Cat No ARI-CHR-39053 or equivelent

S&F in repairs Brass chromium plated shower rose of size 125 mm size with swivel joint fixing to GI pipe of 15mm dia complete all as specified and directed.

S&F in repairs Bib taps with wall flange fancy type chromium plated with crutch screwed down, screwed for iron pipe complete all as specified and as directed Make : Jaquar cat No ARI-CHR-39037 or equivelent

S&F in repairs PVC floor trap 75mm plane including jointing with solvent cement etc all complete

S&F in repair 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and complete all as specified & directed.

S & F 15 mm Single Lever Basin Mixture of Jaquar Make (Cat No ARI-CHR-390018") or equivelent including removing the existing fitting complete all as per manufacturer's instructions and as required at site.

S & F 15 mm crome Single Lever wall mixer 3 in 1 system with Provision for Both Hand shower & Over head shower complete with 115mm long bend pipe, connecting legs & wall flange (without Hand and Over head shower Jaquar Cat No 6480") or equivelent including removing the existing fitting complete all as required at site.

S & F Sheet Glass Shelf Assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long (Jaquar Cat No AQN-CHR-7771)or equivelent

S&F Towel Ring Square with Round Flange of CP fixed with & including CP brass screws & wooden/plastic cleats complete all as specified and directed . Jaquar Cat No CPA-CHR-1121 or equivelent

S&F in repairs wall Hung wash hand Basin with Half Pedestal vitreous china white flat back of size 570 X 470x190 mm with fixing Accessories for Jaquar Cat No . ARS-WHT-39801 or equivelent , complete all as specified and as directed.

S&F LDPE PVC pipe 50mm dia pressure rating 6kgf/cm2 as in waste pipe to wash hand Basin/Kitchen sink /urinal all as specified as in repairs.

S&F Towel Rack 600 mm long without Lower Hangers with CP Jaquar Cat No AQN-CHR-7781A) or equivelent complete all as specified and as directed

S&F Double coat Hook with CP (Jaquar Cat No . CPA-CHR-1161 ) or equivelent complete all as specified and as directed

S&F Soap Dish with CP (Jaquar Cat No . CQN -CHR-7731 )or equivelent complete all as specified and as directed

S&F in repairs 110 mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed

S&F in repairs 75 mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed

S&F in repairs 110 mm bore PVC (SWR) bend any radius complete all as specified & directed.

S&F in repairs 75 mm bore PVC (SWR) bend any radius complete all as specified & directed.

S&F in repairs 110 mm bore PVC (SWR) bend with access door complete all as specified & directed.

S&F in repairs 75 mm bore PVC (SWR) bend with access door complete all as specified & directed.

S&F in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified & directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified & directed.

M & L for Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M & L for treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1cement : 2 coarse sand) to match the existing floors.

M & L for at point of contact to wood work by chemical emulsion ( in oil or kerosene base solutiobn) @ 0.5 ltr / hole by drilling 6mm dia holes at a downward angle of 45 degree at 1.5 mm centre to centre and sealing the same upto 4th storey.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or any thickness in floors,steps aprons etc.complete all as specified and directed

M&L for granite slab 18 to 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement admixture of pigment to match the sade of granite stone incl rounding, grinding and polishing of all exposed edge such as steps, platform, counter, windows sill and other similar work including screed bed or bedding layer of morter 15mm thick in cm 1:4 complete all as specified and directed

S & F in repairs 25 mm stainless steel curtain rod all as specified and as directed.

S & F in repairs 25 mm bore decorative Brackets for curtains all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over one coat of primer including 3mm thick wall care putty on wall complete all as specified and directed.

M&L for complete removal of existing treatment on wall, chajjas & cantilever portion and making good the undulated surfaces of wall, chajjas and cantilever portion by filling of putty including rubbing, scraping & grinding make the wall surface smooth & applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of over a coat of putty & primer on prepared external surfaces of walls of any description over 10 cm width/girth etc on column/pillars , RCC chajja and facia approved colour all as specified.

S&F in repairs Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165

S&F Welded steel wire fabric complete to steel members n exc 4kg/sqm all as specified and as directed.

M&L preparing painting on steel surfaces of any description over 10cm in width or girth, on new surface over a coat of red oxide zin primer and two coat of synthetic enameled paint over it all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

S & F in repairs false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles.at all height with GRG ( Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99 % NRCO. 50 to 0.75 as per IS 8225-1987, nonombustible as per BS 476 (part-4)-1970 and light reflectance of 85 % (miinimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x32 mm of length 3000mm cross-T of size 15x32mm of length 1200mm and secondary intermediate cross -T of size 15 x32 mm of length 600mm to form gris dodule of size 500 x 600 mm suspended from ceiling using galvanised mild steel items (galvanized @ 80 grams per sqm) i.e 50 mm long 8mm outer diameter M S dash fasteners 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40 mm of length3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications drawing and as per directions of the Engineer-in- Charge.

Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed .

M&L for point wiring with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface all as directed and specified.(Make of wire: .(Make of wire: Finolex/Polycab/Plaza Make of PVC Conduit :-Plaza/Prestoplast/Precision)

All as above item but one 3 pin socket outlet 5 Amps on same board.

All as above item but one 3 pin socket outlet 5 Amps but independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty.

All as per above item but for 5/15 Amps point on independent board with two runs of 2.5 Sqmm FRLS grade PVC insulated unsheathed stranded Copper conductor and 2.5 Sqmm, FRLS grade PVC insulated, unsheathed, stranded copper conductor as earth wire.

All as per above item but for DP switch for AC point on independent board with two runs of 4.0Sqmm FRLS grade PVC insulated unsheathed stranded Copper conductor and 4.0 Sqmm, FRLS grade PVC insulated, unsheathed, stranded copper conductor as earth wire.

All as per above item but for one light point controlled by one two way switch

S&F in repairs Sub main wiring using two runs of FR grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 6.0 Sqmm and one run of 6.0 Sqmm grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note : Two runs of 6.0 Sqmm copper wire,one run of 6.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza, Make of PVC Conduit :-Plaza/Prestoplast/Precision)

S&F Ceiling rose,3 terminal PVC/poly carbonate isolated body. Make:- Anchor / Cona/Havells.

Supply and fixing including connection of modular switch one way 6 Amps 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing including connection of modular switch one way 16 Amps 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply & fixing connection modular socket outlet 2 /3 pin 6 Amps 2 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply & fixing connection modular socket outlet 2 /3 pin 6/16 Amps 2 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing Modular Fan regulator,120 watts (Make : .Crabtree/Cona/Havells)

Supply & Fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed

Supply & Fixing Modular switch 2 way 6A, 1 module complete all as specified and directed

Supply and fixing white modular cover plate with frame 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 2 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 3 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 4 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 6 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing modular metal flush box 1/2 Module complete all as specified and directed.

Supply and fixing modular metal flush box 3 Module complete all as specified and directed.

Supply and fixing modular metal flush box 4 Module complete all as specified and directed.

Supply and fixing modular metal flush box 6 Module complete all as specified and directed.

S&F in repairs MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 6 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified. (Make/Model :Cat No:DHDESHCDOW06 of Havells or Standard/Legrand/HPL/L&T)

S&F in repairs MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 4 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified. (Make/Model :Cat No:DBSPN004DD of L&T or Standard/Legrand/HPL//Havells)

Supply and fixing in replacement of VTPN double door load line DB LL 4 Way DD VERT W/O MCCB double door suitable for TP/FP 'G' frame MCCB and fitted with bus bar, neutral links and blanking plate, IP-43 ( Make/Model- DHDLVDOBGSFE04 of Havells or Equivalent of Standard/Legrand/HPL/L & T).

S&F in replacement MCCB 4 pole, with Adjustable thermal & adjustable magnetic of breaking capacity 25 kA, 415 Volts, 100 Amps.(Make: Havells/Standard/Legrand/HPL/L & T)

S&F MCB, TPN 63 Amps rating 240, volt, 'C' series, 10 kA (Make Havells DHMZCTNF063 or Standard/Legrand/HPL/L & T)

S&F MCB, SPN. 20 Amps rating 240, volt, 'C' series, 10 kA (Make Havells DHMZCSNF006-032 or Standard/Legrand/HPL/L & T)

S&F MCB, SPN. 40 Amps rating 240, volt, 'C' series, 10 kA (Make Havells DHMZCSNF060 or Standard/Legrand/HPL/L & T)

S&F MCB in replacement SP, 6-32 Amps, 240 volt, 'C' Series, 10 kA ( Make Havells,Cat No.DHMZCSPF006-032 or equvalent to Standard/Legrand/HPL/L & T)

Supply and fixing in repairs Round and Square surface mounted LED panel. PDC luminium housing and high translucent frosted plastic diffuser makes it a robust Luminaire. Efficacy: 100 lm/W warm white ,LED 12W including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified and directed. ( Make /Model No :- LCDSPLN-R-12-CDL of Crompton or equivalent of Phillips/Havells/ Wipro )

Supply and fixing in repairs High-quality design LED Tube light fittings in extruded aluminium housing with high quality PC diffuser 1x20 watt with enhances safety and relible ,robust housing structure with decorative end caps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. ( Make /Model No :- CCS-100-20-65-HL2-DP-NWH(BRIGHT LINEA) of Crompton or equivalent of Phillips/Havells/ Wipro )

Supply and fixing in repairs foot light 3 watt compat, sleek aluminium die cast using high qulity LED and drive Complete all as specified and as directed. Make : Philips/Wipro/Crompton

Supply and fix in replacement LED retrofit lamp 9/10 Watt having B22 holder base with polycarbonate body and aluminium heat sink. Complete all as specified and as directed. Make : Philips/Wipro/Crompton

Supply & fixing in repair Building security light fitting,new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 25 watt.(Make/ Model:- Crompton(ASTRA NEO), Cat No . LSTS-25-CDL-M or equvalent to Phillips/ Wipro)

Supply and fixing in repair of GI pipe Bracket of 40 mm dia Medium grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata)

Supply and fixing in replacement of DP switch with indicater modular type-2M, 32 Amp suitable for Split/ window AC (On Off Switch) all as specified and directed Make Havells (DRO White) CAT No AHOMDIW32 or equvalent to Standard / Legrand/HPL/L & T)

M&L for Earthing with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick,buried directly in ground(earth pit not less than 2.25 meters deep below ground Level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised Iron Wire of size 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers etc, GI earth lead strip duly protected by 40 mm dia GI pipe (light grade) and 20 MM GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 Mtrs, PCC (1:3: 6) type C1 as in concrete pit,50mm thick precast RCC (1:1.5:3) type A1 as in cover slab duly reinforced with 8 mm dia TMT bar @ 100 mm c/c both way and two nos lifting handle made cut of 10 mm dia TMT bar and set in cement mortar (1:4), testing etc complete and as specified in electrical plate No 3 of SSR part-I including taking down old earthing plate & GI Wire

Taking down carefully unserviseble Ceiling fan from fan points and kept carefully in MES store under custody of Engr- in- Charge/JE E/M complete all as specified & directed .

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as specified and directed

Fixing only Ceiling Fan on existing points after minor repair ,Pionting including greacing complete all as specified & directed .

Supply and laying in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm 3.5 core complete all as specified and as directed.

Excavation in trenches in any type of soil n.exc 1.5m wide and n. exc 1.5m depth getting out of soil for taking out or laying of pipe line etc complete all as specified and directedfor laying of cable, errection of poles, stay and pipe line, complete all as specified and as directed.

Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified.

Removal of surplus soil to a distance n. exc 50 m above the starting point complete all as specified.

Supply and fixing HDPE double wall pipe corugated pipe of size 90mm outer dia for cable protection laid in trenches in lieu of sand/brick protection complete all as specified and directed.

Supply and fixing GI pipe,50 mm dia 'light grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors for cable protection all as specified and directed.

Taking down the storage type water heater of any type & size, by disconnecting electric connection, carrying out necessary repair such as cleaning of inner water tank, removing scales,connecting flexible three core copper cable of size 2.5 sqmm and re - fixing in original position, grouting, testing and commissioning, complete all as directed. Notes : (i) spares replaced shall be measured and paid seperately under supply onlyunder relevant item of this schedule.

M&L for spray painting with white synthetic enameled paint after preparation of old surface of geyser of any make/model., complete all as specified and directed by Engineer-in-charge.

Supply and fix replacement indicating lamp for geyser, including dismantling the existing u/s element, complete all as specified.

S&F in replacement 3 pin plug top of 15 Amp, complete all as specified and directed by Engineer-in-Charge. Make: LEGRAND / ANCHOR / CONA / PLAZA / BAJAJ

Supply and fix in replacement heating element 2000 Watt capacity, 230 Volts, round / triangle base suitable for existing water heater of 50 ltr capacity.

Supply and fix in replacement heating element 1500 Watt capacity, 230 Volts, round / triangle base suitable for existing water heater of 25 lrt capacity.

S&F in replacement 15mm dia hot & cold PVC flexible connections (heavy duty) with two Nos brass nuts with washer at both ends of 450mm long, in repair, complete all as specified. Make : PRAYAG / COMMANDER / PRINCE/POLYTUF

Supply and fix in replacement GI pipe medium grade of 15mm dia with all fittings such as bends, elbow,tees,short pieces, connector , back-nuts, diminishing pieces, caps, plugs and unions, etc. complete as directed by Engr-in-Charge.

Supply & fix in replacement stop valves of 15mm size, cast copper alloy, screwed down, high pressure with crunch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete as direted by Engr-In-Charge.

Supply and fix in replacement of Thermostat of capacity 1500/2000Watt for geyser of any capacity all as specified and directed by Engr-in-Charge.

S & F in re[placement of stainless Steel geyser tank of 25 ltres capacity complete all as specified and directed

Taking down Split AC inner unit of any type & size, by disconnecting electric connection, gas pipe connection carrying out necessary repair such as water cleaning & other minor repair and re - fixing in original position, grouting, testing and commissioning, complete all as directed. Notes : (i) spares replaced shall be measured and paid seperately under supply only under relevant item of this schedule.

Supply and charging refrigerant gass R-410 up to required level including cleaning the capilary and air filter evoprator condensor, including testing of leakage or pressure test suitable for 1.5/2 ton split AC complete all as directed.

Supply and fixingin replacement of wall mounted light fitting Non-Integrated Luminaire metal and matte Opal glasssuitable for E27 holder maximum 0 to 20 Watt light complete including bulbe all as specified and directed.(Make philips Cat No 582086 or Wipro/Crompton)

HARI PALAI (BID ID -3331393)

ABHIMANYU MAHARANA (BID ID -3344429)