REPAIR MAINT OF JOINERY, INTERNAL WATER SUPPLY PLUMBING, ROOF TREATMENT, FALSE CEILING AND OTHER MISC WORKS AT CDA COMPLEX, CDA OFFICE AND LAO OFFICE UNDER GE GUWAHATI

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each. complete all as directed.

Taking down shutters exc 1.00 sqm but n.exc 2.00 sqm each of any description complete all as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, with particle board core, complete as per specification & drawing as specified in SSR Part I, Section 8 and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Prelam colour PVC sheet & edges painted to match with prelam sheet reinforced with M.S. Square tube, & fixing in opening complete as per specification & drawing as specified in SSR Part I, Section 8 and as directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed.

M&L second class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.

S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

S&F in repair, 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F in repair, 25mm thick Boarding, planned both sides,fixed with nails with butt joints, Fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work in any situation (except flooring and skirting) complete all as specified and as directed.

S&F 75mm Hasp and staple, safety type, aluminum anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F 30mm Width of flaps(when open)Continuous (piano) hinges,mild steel, bright finish or elctrogalvanised complete all as specified and as directed.

S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 100mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 150mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed.

S&F in repair, Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ,140mm Overall length of cover plate, complete all as specified and as directed.

S&F in repair, aluminum (extruded body section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and as directed.

Taking down aluminum door, window and partition (of any type/size) and refixing the same in existing position including necessary repair such as straighting of edges, bringing at a level with required cutting/ re adjusting of any depression/projection as per site condition complete all as directed

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium windows/ventilators/partitions any type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply only Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Supply only 5mm thick tinted glass, ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 4mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to Aluminum frame work complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as directed.

Taking down shutters and refixing in the same opening exc 1.00 sqm but n.exc 2.00 sqm each of any description complete all as directed.

M&L Non skid coloured tiles 7 to 8 mm thick(square/ rectangular) area of each tiles exc.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slury over and including cement screed 15 mm thick 1:6 complete all as specified and as directed.

M&L Coloured glazed ceramic tiles 300 x 450 x 7 mm/450 x 350 x 7mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 150mm cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate) complete all as specified and as directed.

S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe complete all as specified and directed.Make-JAQUAR CAT No-WHC-WHT-184NBTT or as approved by GE from list of approved makes.

S&F in repair, Bib cock with wall flange complete all as specified and as directed Make-JAQUAR CAT No-KUP 35037PM or as approved by GE from list of approved makes.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S&F in repair, 32mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs,15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

S&F in repair 15mm bore pillar taps, chromium plated, fancy type, screwed down high pressure, screwed for iron pipe complete all as specified and as directed Make-JAQUAR CAT No-KUP-35001PM or as approved by GE from list of approved makes.

S&F in repair 600x450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed

S&F in repair, Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden /plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F in repair, Grating doom 125mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

S&F Rimless Bowl for coupled WC with UF soft close slim seat cover , Hinges, Fixing accessories set and accessories set, Cistern fitting, Size:380x660x850mm,S tram-250mm all as specified and as directed Make-JAQUAR CAT No-ONS-WHT-10753S250UFSM or equivalent as approved by GE from list of approved makes.

S&F Two Way Bib Cock with Wall Flange Make - JAQUAR CAT No KUP-35041PM or equivalent as approved by GE from list of approved makes

S&F Hand shower (health faucet)(ABS Body) 1.00 meter long flexible tube & wall hook all as specified and as directed Make-JAQUAR CAT No-ALD-565 or equivalent as approved by GE from list of approved makes.

S&F toilet paper holder with stsinless steel flap complete all as specified and as directed Make-JAQUAR CAT No-ACN-1153S or equivalent as approved by GE from list of approved makes.

S&F 15mm bore Angular Stop cock with Wall Flange complete all as specified and as directed Make - JAQUAR CAT No OPP-15053PM or equivalent as approved by GE from list of approved makes

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 500 ltrs capacity complete all as specified in SSR Part I, including necessary dismantling old unserviceable tank complete all as specified and as directed

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and directed.

Taking out existing APP membrane including screed bed and removing debries outside the permises complete all as specified and as directed

M&L Claening the RCC slab surfaces including sides upto 300mm high by wire brushes , raking and cleaning of construction joints if any and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.

M&L for 15mm thick cement mortar plaster (1:4) on green concrete roof surfaces faces mixed with and including liquid water proofing componud as per manufacturers instruction, finishing the surface fair and even without using extra cement complete all as specified and as directed.

M&L Cement concrete type B0, (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in roof padding, roof kerbs or mud stops, rounded or chamfered on edges for roof surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L water proofing treatment to flat roofs and edges, applying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.60 Kgs per Sqm reinforced with non-woven polyester febric weight not less than 150gms per Sqm over a coat of bituminous primer @ 0.3Kg/Sqm, after necessary cleaning the surfaces. Polymeric membrane shall be taken to a height of 30cm(minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrane flashing, complete all as specified and as directed. Note : (a) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (b) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction.

M&L One coat of Solar reflective bituminious Aluminium paint of approved brand to be provided over the APP membrane as per manufacturers instructions. cement complete all as specified and as directed.

M&L for 15mm thick cement mortar plaster (1:6) on concrete roof surfaces faces mixed with and including liquid water proofing componud as per manufacturers instruction, finishing the surface fair and even without using extra cement complete all as specified and as directed.

S&F Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry over roof surfaces, and cut and polished, with grey cement and no pigments complete all as specified and as directed.

S&F Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m over APP membrane complete all as specified and as directed. Note : (For item No. 51 to 58) (a) Work shall be carried out through specialized applicator approvrd by GE. Contractor shall submit sufficent documents/Credentials in support of Applicator whom he wants the work excuted. (b) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work of any description complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work for false ceiling, Size of grid 605 x 605mm, comprising of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, including 15mm thk Mineral fibre acoustic suspended ceilig board fixed or laid/ inserted to GI framework with screws complete all as per manufacturer’s instructions and as specified and directed .

Taking up or down 20mm bore GI pipe and connection complete all as specified and as directed.

Taking up or down 25mm bore GI pipe and connection complete all as specified and as directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11, fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11, fittings on walls/ceiling or laying in floors complete all as specified.

M&L for preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M/S MANOJ PAUL

M/S SEWAK SINGH

M/S Bharat Construction