Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC | L1 | Accepted-AOC Being a lowest bidder | |
| 2 | L2₹22.9 L+₹54,630 (2.44%)Rejected-Finance 86 MAHEWA EAST NAINI PRAYAGRAJ U P | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211008 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹23.4 L+₹96,860 (4.32%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹23.5 L+₹1.1 L (4.73%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹24.6 L+₹2.2 L (9.67%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹21.3 L
EMD Value
₹42,600
Closing Date
15 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bamrauli
GE (AF) Bamrauli
SPECIAL REPAIRS TO CHHAJJAS PARAPET WALL RAIN WATER PIPES AND EXTERNAL FINISHES TO CERTAIN OMQS AT NEW PROJECTS AND OTHER SANCTION WORKS UNDER GE (AF) BAMRAULI
2024_MES_639316_1
8868/E8
Open Tender
Civil Works - Others
Works
30 days
GE (AF) Bamrauli
Please refer Tender documents
7 documents required · 7 mandatory
₹500
GE (AF) Bamrauli
₹42,600
Yes
23 Mar 2024
27 Jan 2024
17 Feb 2024
27 Jan 2024
15 Feb 2024
10 Feb 2024
Amount
M & L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge
M & L for Rendering 15mm thick in cement plaster 1:6 on any fair faces of brick work or concrete surfaces finshed even and smooth with out using extra cement complete all as specified and as directed by the Engineer-in-Charge
M&L preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion with roller brush, white or tinted over & including 1.5 mm thick putty, Using Mechanical means complete all as specified and as directed by the Engineer-in-Charge
M&L for preparation of new surfaces of wall any type applying two coat of exterior emulsion paint over 1.5 mm thick putty ,using Mechanical means complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of old surfaces of wall/ceiling any type applying two coat of weather proof (exterior emulsion paint) over 1.5 mm thick putty ,using Mechanical means complete all as specified and directed.
M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) Using Mechanical means complete all as specified and directed.
M&L preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted including a coat of cement wash with white cement Using Mechanical means complete all as specified and as directed by the Engineer-in-Charge
M&L preparing old plastered or unplastered surfaces of walls and applying one coats of cement paint white or tinted including a coat of cement wash with white cement Using Mechanical means complete all as specified and as directed by the Engineer-in-Charge
M&L complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including one 2mm thick wall care putty Using Mechanical means complete all as specified and as directed by the Engineer-in-Charge
M&L preparing old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion, white or tinted Using Mechanical means complete all as specified and as directed by the Engineer-in-Charge
Ditto as per item no 10.00 above but on ceiling complete all as specified and directed.
M&L preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means complete all as specified and as directed by the Engineer-in-Charge
M&L preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means complete all as specified and as directed by the Engineer-in-Charge
M&L for water proofing treatment for existing sunken portion by complete demolition of existing leakage sunken portion area exc 1 Sqm but n. exc 2.0 Sqm and cleaning the surface and applying cement slurry and 10 mm thick cement plaster in CM 1:3 mixing with liquid water proofing compound after surface is fully dried, cleaned free from dust and painting with a coat of bituminous primer @ 0.3 liter / Sqm after primer the entire surface, applying with hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2Kg / Sqm, over hot bitumen, providing polymeric water proofing membrance consisting of 90 to 100 micron thick central core of HMHDPE fill with standard weight not less than 3 Kg/Sqm provide with 100mm side lap/end lap after that fixing P trap and filling sunken portion in PCC 1:5:10 type E-2 appox 30cm high and PCC 1:2:4 type B-1 using 20mm graded stone aggregate incl provide spout of 40 mm bore GI pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc complete all as specified and directed. Note : (i) Rate quoted by the contractor shall deemed to be included for testing of treatment as directed by Engineer in Charge.
M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge
M&L for vitrified ceramic light shade tiles 10 mm thick (square/Rectagular) polished area exceedign 0.36 sqm and n exc 0.42 sqm in each tiles as in floors etc set and jointed in neat cement slurry and pointed in white coloured cement to match the shade of tile over and including 15mm thick screed bed in cement and sand mortar (1:4).etc all as specified and directed
M & L for Non-Skid coloured printed ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.09sqm and not exceeding .38 sqm of each tiles as in skirting / dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 for laying glazed tiles in floors etc. complete all as specified and as directed by the Engineer-in-Charge
S & F for Glazed ceremic coloured printed tiles of size 600 mm x 450 mm x 7 thk or 450x 3000mm x7mm thick as in dados, skirting, wall etc set jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 10 mm thick rendering in CM 1 : 4 for laying glazed tiles in floors etc. complete all as specified and as directed by the Engineer-in-Charge
M & L for 20 mm thick any colour Granite / Kota stone work (table rubbed and polished) over 20 mm thick screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by the Engineer-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge
S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
M&L for Anodised aluminium powder coated three track sliding window/Openable Door (shutters with frame), Frame aluminium section weighing 1.5 kg/m ( minimum) including 5.5 mm thick glass/wiremess as per user requirement and all necessary fittings,4 lever locks, two nos handles size 150mm incl joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws and all including required fittings etc complete all as specified.
S&F Powder coated aluminium frame for doors, windows, ventilators or partition with one or more rebates including joining cleat for fixing etc. complete all as specified
S & F in repiars butt hinges mild steel cold rolled mild and fixed 100mm size, type C-22, extruded mild steel with mild steel hinge pin, anodised complete all as specified and as directed by the Engineer-in-Charge
S&F powder coated 250mm long of alluminium sliding door bolt with hasp, staple (bolt type) with sand or die cast and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or brass door shutter complete all as specified and as directed by the Engineer-in-Charge.
S&F powder coated150mm length extruded alluminium alloy handles cast type , bright polished all as specified an directed by Engr In Charge
S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
Taking down steel tubing and connections including removing from site of 15mm bore pipe all as specified and directed by Engineer-in-charge.
All as above item No 31 but 20mm bore.
S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.
All as per item No 32 bove but 20mm bore
S/F in repairs to rotational moulded vertical water storage tanks with closed tops ( cylinderical ) hoisted and fixed in position 1000 ltr capacity incl disconnecting and refixing the existing GI fitting and pipe complete all as directed.
S&F 110mm dia PVC SWR pipes of pressure 6kgf/cm2 fixed complete to walls ceilings, in floors etc including all necessary fitting arrangements and bends couplings etcas in rainwater pipe all as specified and directed by Engr-In-Charge
S&F continous (Piano) hinges of mild steel bright finish or elctrogalvanised 30mm flap width all as specified and directed by Engr-In-Charge.
Supply and fix of 18 mm thick Celuka ply of prelaminated/ Rigid laminated of desired colour one side and other side plain colour fixed with screws/ solvent cement/adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets complete as per specifications and as directed by engineer-in-charge. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)
Supply and fix of 18 mm thick Celuka ply both side plain white color to make kitchen cabinet Shutter/drawer front shutter complete as per specifications and as directed by engineer-in-charge. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)
S&F of 150mm wide for frames for fising of shutters with 36 mm thick (18mm thick back to back sticked) Celuka ply of prelaminated/ Rigid laminated of desired colour one side and other side plain colour fixed with screws , solvent cement/adhesive to make wall mounted kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by engineer-in-charge. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)
S & F of 18 mm thick Celuka ply one side prelam/rigid laminated and other side plain white colour to make kitchen cabinet Shultter/drawer front shutter incl taking down of old unserviceable board complete as per specifications and as directed. (Note : Fabrication and installation work to be carried out by authorised Fabricator only).
Supply only stainless steel (Grade S-304) basket (plain) of minimum size 50cm x 37cm x 10cm made of 4 mm minimum dia S.S. Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and dirercted.
Supply only stainless steel (Grade S-304) thali basket (11-13 division) of minimum size 50cm x 37cm x 20cm made of 4 mm minimum dia S.S. Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and dirercted.
Supply only stainless steel (Grade S-304) plate basket (11-13 division) of minimum size 50cm x 37cm x 16cm made of 4 mm minimum dia S.S. Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and dirercted.
Supply only stainless steel (Grade S-304) Partition basket of minimum size 50cm x 37cm x 16cm made of 4 mm minimum dia S.S. Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and dirercted.
Supply only stainless steel (Grade S-304) Cutlary basket of minimum size 50cm x 37cm x 10cm made of 4 mm minimum dia S.S. Wire and bottom of SS Perforated sheet approved quality with suitable arrangement for fixing telescope channel complete all as specified and dirercted.
Supply only stainless steel (Grade S-304) basket (plain) of minimum size 50cm x 37cm x 16cm made of 4 mm minimum dia S.S. Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and dirercted.
Supply only stainless steel (Grade S-304) bottle pullout of minimum size 50cm x 40cm x 16cm in two tie made of 4 mm minimum dia S.S. Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and dirercted.
Supply only stainless steel (Grade S-304) ball bearing telescope channel 20" length (full extension mechanism) complete all as specified and dirercted.
Supply only Autocut Hydrolic (soft closing) stainless steel hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and dirercted.
Supply only 75mm dia oval shape SS handle fancy type polished bright finish for kitchen cabinet shutter complete all as specified and dirercted.
Supply only 150mm dia oval shape SS handle fancy type polished bright finish for kitchen cabinet shutter complete all as specified and dirercted.
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.
MOHAMMAD RIZWAN CONTRACTOR
M/s Techno India and Company
M.R. ENTERPRISES
M/S A M ENTERPRISES
M/S R S Traders
M/S SATISH KUMAR
Pleiad Complex On
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .