Repair and Renovation of Veterinary Dispensary at Hiranagar

Amount

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundwithin 50 meters lead

Regarding terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead

15mm Cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement :6 fine sand

12mm Cement plaster on the rough side of single or half brickswall of mix:1 : 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3

Painting top of roofs with bitumen of approved quality at 17 kg per 10sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. 12.15.1 with residual type petroleum bitumen of grade VG-10

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth andgobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks groutedwith cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. 12.25.1 With common burnt clay (non modular) brick tiles of class designation 10.0

Providing gola 75x75mm in cement concrete 1:2:4

Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4

Providing and fixing on wall PVC rain water pipe incl.jointing with seal rings 110mm dia.

Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : 15.13.1 Of area of 3 sqm. and below

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. i,Second class deodar wood a. 35mm th.

b.30mm thick

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick i. MDF board 12 mm thick.

ii. Float glass panes of thickness 4.0 mm(weight not l ess than 10kg/sqm

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on a, wood work (hard and soft wood)

b)With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat

Painting with synthethic enamel paint of approved brand and manufacture to give an even shade two or more coats.

P/ fiixing door/window fixtures (ALLUMINIUM) a) Tower bolts i,150x10mm

c) " " iii, 200x10

d) Handles i,125mm

e) " ii, 100mm

f) Stay Hooks

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

P/F 1mm thick M.S sheet door with frame of 40x40x6mm angle iron and 3mm M.S gusset plates at the junctions and cor ners, all necessary fittings complete applying a priming coat of approved steel primer Using M.S angle 40x40x6mm for diagonal braces.

Supply of brick tile

Labour for dismantling existing sanitary fittings a/ Plumber

b/ Helper

P/F PVC Pipe and fittings a/ Pipe i. 110mm dia

ii. 75mm dia

b/ Plain bend i. 110mm dia

ii. 75mm dia

c/ Door tee i. 110mm dia

ii. 75mm dia

d/ Floor trap 75mm

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: a/ 20mm dia

b/ 15mm dia

P/F water closet squantting pan (Indian type) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with all fittings and fixtures. White vitreous china Orissa pattern W.C. pan of size 580x440mm

P/F white viterous china pedestal type water closet ( European type W.C . Pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern complete W.C. PAN with ISI white solid plastic seat and lid

P/F white viterous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes resp. with automatic flushing cistern.Complete one urinal basin with 5 litre white P.V.C. automatic flushing cistern

P/F Wash basin with C.I. brackets, 15mm C.P.brass pillar tape 32mm C.P. brass waste of standard pattern complete.White viterous china wash basin 550x400mm with single 15mm C.P.Brass tap

P/F 8mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S.triangular plate to Eurpean type W.C.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make

Repair to main gate incl.dismantling,necessry welding, holdfastrefixing the same and painting etc.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Carriage of material by MT

a Cement av. 2km lead

b.Sand and stone agg. below 40mm size av 5km Lead

c. BrickTiles av 8 km lead

M/S KULJEET SINGH

M/S GOURAV SHARMA

M/S PARDEEP JAMWAL GOVT CONTRACTOR

M/S DWARKA NATH GOVT CONTRACTOR

Dheeraj Gupta