Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹41.2 LAdmitted-Finance | -17.65% | ₹41.2 L | L1 | Admitted-Finance |
| 2 | L2₹51.0 LAdmitted-Finance | +2.00% | ₹51.0 L | L2 | Admitted-Finance |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
11 Mar 2026, 6:00 pmClosed
Executive Engineer PWD(RandB)nagrota Jammu
Executive Engineer PWD(RandB)nagrota Jammu
Permanent Restoration of Jagti road to Nagrota Jammu Damaged on 26th to 30th August 2025 (2nd Call)
2026_PWDJK_305020_1
Short e-NIT No. 87 of 2025-2026/Nagrota Dated 25-02-2026
Open Tender
Civil Works
120 days
Executive Engineer PWD(RandB)nagrota Jammu
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Executive Engineer PWD(RandB)nagrota Jammu
₹1 L
Yes
1 Apr 2026
2 Mar 2026
12 Mar 2026
2 Mar 2026
11 Mar 2026
2 Mar 2026
Slip/Drain Clearance In soils; mixed with moorum/ Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m.
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
Providing, laying watering and compacting in layers not exceeding 200mm thick with 80-100 KN road roller, River Bed Material free of organic material mixed with coarse aggregate / Round nallah shingle maximum aggregate size 75mm including carriage from source of supply to site of work inclusive of all leads and lifts complete.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
Centering and shuttering including strutting, propping etc. and removal of form for:
Foundations, footings, bases of columns etc. for mass concrete.
Providing and Laying WBM Gr-III (with specified stone aggregates Stone screening and binding Material complete including sorting,spreading to templete and consolidation with power Road Roller 8 to 10 ton capacity etc and base stone aggregate 63 mm to 45 mm size incl. Stone Screening size 13.20mm (75mm thick)
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge
Providing and applying tack coat using hot straight run bitumen of grade – VG-30, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications.
On W.B.M. @ 0.75 Kg/sqm.
On bitumen surface @ 0.50 Kg/sqm.
2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt grade VG-30 with no solvent.
Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-30 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete
Carriage of materials by mechanical transport inculding loading / unloading and stacking complete.
Sand for an avg. lead of 10.00 Kms.
Stone aggregate Below 40 mm lead of 10.00 Kms.
Stone aggregate Above 40 mm lead of 10.00 Kms.
Good Earth for an avg. lead of 5.00 Kms.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.10 MB
BOQ_990760.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid