Pumping Kanakalapeta

Amount

2.10.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m - all kinds of soil - pipes,cables etc , exceeding 80mm dia but not exceeding 300 mm dia.

2.6.1A Earthwork in excacavation over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m - disposed earth to be levelled and neatly dresses - all kinds of soil.

2.27A.1 Supplying and filling with gravel (excluding rock) in trenches, plinth, sides of foundations etc. In layers not exceeding 20 cm in depth consolidating each deposited layers by ramming and watering etc .complete including all lead and lift

4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size).

6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand).

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer all complete.

10.20 Providing and fixing bolts including nuts and washers complete

13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)

15.3 Demolishing R.C.C work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead.

18.26.1 Providing and laying flanged C.I.standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS:1538 - upto 300 mm dia.

18.35.1 Constructing masonry chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1cement : 4 coarse sand) for sluice valve, with C.I.surface box 100mm top diameter, 160mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick , finished with a floating coat of neat cement complete as per standard design - with common burnt clay FPS clay F.P.S. (non modular) bricks of class designation 7.5

31.48.4E Providing and fixing C.I. sluice valve (PN 1.6) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 200 mm dia.

31.153.1G Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc,complete-150mm dia.

31.160.1M Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore /Nandi) (1 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 200mm dia.

31.172.1H Providing and fixing in position UPVC moulded tail piece without flange(Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 200mm dia.

31.179.1H Providing and fixing in position UPVC fabricated bend (Finolex / jain) (1 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 200 mm dia.

31.256.1C Supplying and fixing of fully automatic air break star-delta starter range for 13A to 25A F.A.S.D. (Bharat Culter Hammer/ L&T/ Siemens make) with suitable M.S. angle frame etc., complete.- 20HP to 25HP pumpsets -(ML-1.5).

31.258.1C Supplying and fixing of 1x3x10 sqmm (single run) PVC insulated copper submersible flat flexible cable of Finolex make complete.-above 20HP pumpset.

Basic Code No.1372F Supply and fixing of 200mm dia (Rubber insertion for flanged pippe joints) etc. complete as directed by the Engineer-in-charge.

2.1.1 Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including getting out and disposal of excavated earth up to 50m and lift up to 1.5m - All kinds of soil.

2.6.1 Earth work in excavation by mechanical means (Hydraulic excavation) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m - all kinds of soil

2.11 Extra for excavating trenches for pipes,cables etc. in all kinds of soil for depth exceeding 1.5m , but not exceeding 3 m (Rate is over corresponding basic item for depth upto 1.5metre).

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

4.3.1 Centring and shuttering including strutting, propping etc. and removal of form work for - foundations, footings, bases for columns.