REPAIR REPLACEMENT OF FENCING COMPOUND WALL RCC

Amount

Demolition of plain cement/Asphaltic concrete in ground floors n. exc. 15 cm in thickness (below or above GL)unreinforced and removing debries out side of MoD land complete all as specified and as directed.

Demolition of brick work or stone / boulders masonry built in cement mortar or cement lime mortar incl all quoins, pillars etc but excel ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. Raking out joints , hacking for key and scrubbing down with water complete all as specified and directed

M&L for 75 mm thick PCC type D-2, 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M& L for 80 mm thick, M-40 grade machine pressed rubber form moulded precast interlocking concrete coloured (Red/yellow) paver block over 25mm thick sand cushioning in any shape and size with grey cement and pigment as approved confirming to IS 15658-2006 in repair. complete all as specified and as directed.

M&L for Providing, cement concrete in roof/side kerbs or mud stops copping, rounded or chamfered on edges making good disturbed surface of ground including formwork complete all as specified and directed.(TypeB-0 1:2:4 12.5mm graded aggregate)

M & L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame in repairs with cement concrete type B-0 (1:2:4) (12.50 mm graded aggregate) set in cement mortar (1:4) complete all as specified and as directed.

M&L for brick work with old size brick, sub class B brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 all as specified.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

S &F M S Work in post and struts in fencing including cutting top to shape ,drilling holes,notching for wire etc,flat iron fillets inc all necessary drilling,bolting or rivetting and similar work cofirming to Fe -290 Gde E-165 complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size or type weighting complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of shank 5 to 10 mmcomplete all as specified and as directed.

S&F for mild steel round bars, 8 mm dia and over cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe-410W Gde E-250 complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M & L for Preparing plastered or unplastered new surfaces of walls/RCC Jalli and applying two coats of Exterior grade Premium Acrylic smooth paint weather proof emulsion paint of (white or tinted) including one coat of exterior primer all as specified complete all as specified and as directed.

M & L for Preparing plastered or unplastered old surfaces with complete removal of existing treatment of walls/RCC Jalli and applying two coats of Exterior grade Premium Acrylic smooth paint weather proof emulsion paint of (white or tinted) including one coat of exterior primer all as specified .

Demolition/Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in cement mortar of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for Prepolished coloured Chequered cement concrete tiles 25cm x 25cm/ 30cmx30 cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment, in floors over and including 20 mm thick screed bed or bedding of CM 1:6 complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in Concrete

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified and as directed.

M & L for precast cement concrete type B1(1:2:4) (20 mm graded ) as in kerb stone, with plain fair faces, including chamfers, weatherings, throating etc. and setting in Cement mortar (1:4) complete with joints to match complete all as specified and as directed by the Engineer-in-Charge

M & L for Welding in repairs exc 2.5cm but n exc 5mm running lenth with metal thickness Exc. 6mm but Exc. 9mm in length complete all as specified and directed by the Engineer-in-Charge

Material & Labour for providing and fixing stainless steel (Grade 304) railing/gates made of hollow tubes, channels, plates etc, including welding, grinding in repairs, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by the Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed by the Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed by the Engineer-in-Charge

S &F Joist, channel, flats,angle, or tee sections, fixed ndependently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated Fe-410- W(Gde E-250) quality B complete all as specified and as directed by the Engineer-in-Charge

M/S MG GROUP (BID ID -3109287)

M/S LADPURIA ENTERPRISES (BID ID -3122445)

GIR RAJ BUILDERS (BID ID -3102048)

shakti construction (BID ID -3108670)