REPAIR MAINT TO JOINERIES AND PLUMBING INCLUDING SANITARY FITTINGS IN NORTH CAMP AT ATS SAMBRA

Amount

Rubbing and mirror polishing to existing kota stone incluidng waxing to remove all stain, dirts/soil marks etc. all as specified and directed.

Taking down cement plaster including raking out joint, hacking for key, scrubbing down with water etc. all as specified and directed.

Dismantling of wall floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing unserviceable material etc. all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position all as specified and directed

M & L Plain Cement Concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in 75mm thick plinth protection and finished even and fair without using extra cement including cutting and filling expansion joint with bitumen sand mixture all as specified and directed.

M & L Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in 100mm thick hard standing or paving etc and Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M & L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including necessary form work and exposed surface of concrete shall be finished even and smooth without using extra cement all as specified and directed.

M & L hardcore with broken stone or boulders gauge not exceeding 63 mm size deposited spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface all as specified and directed

M & L Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in 75mm thick sub base to floor all as specified and directed

M & L Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed

M & L Machine pressed precast concrete interlocking paver block, rubber moulded, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment including removing old paver block etc complete all as specified and directed

Supply only liquid water proofing compound all as specified and directed

Demolition of brickwork or stone/boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but all as specified & directed

M & L Pre-cast cement concrete 1:3:6 type C1 using 20 mm graded stone agrregate as in solid block masonary exc 10cm width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:6 complete all as specified & directed

M & L Pre-cast cement concrete1:3:6 type C1 using 20 mm graded stone agrregate as in solid block masonry not exceeding 10cm width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified & directed

M & L rendering 10 mm thick cement mortar 1:6 over fair faces of brick work or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L rendering 15 mm thick cement mortar 1:4 over fair faces of brick work or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L rendering 05 mm thick cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L Plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in 25mm thick levelling course/sub base under floor all as specified and directed.

M & L Coloured glazed ceramic tiles of size 450 x 300 x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M & L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles over and including cement screed bed 15 mm thick cement mortar1:6 complete all as specified and directed.

M & L Vitrified Ceramic tiles,double charged, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with rectified edges ( joint free) etc set and jointed in neat cement slury over & including cement screed bed 15 mm thick cement mortar 1:6 complete all as specified and directed.

M & L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing etc complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Dismantling asbestos cement (Corrugated, semi corrugated, etc) sheets in roof coverings including ridges all as specified and directed.

Dismantling RCC posts or struts ( steel , RCC) any section including taking down embedded portion and making good disturbed ground all as specified & directed

M & L Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors and door frames; fixed with angle cleats or other connecting plates etc of Fe 290 (Gde E-165) complete all as specified and directed.

S & F Mild Steel flat as in wind ties for roofing including securing bolts confirming to Fe -290 Gde E-165 all as specified and directed.

S & F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws all as specified and directed.

S & F welded steel fabric not exceeding 4Kg/sqm welded with existing steel reinforcement elements etc complete all as specified & directed

S & F Galvanised Iron wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste etc complete all as specified & directed

M & L Precast cement concrete 1:3:6 type C-0, using 12.5mm graded stone aggregate as in 50mm thick louvres and jallies set in cement nortar 1:4 (mea sured solid) including all mouldings but excluding frame complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sq. m each all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down Chowkhats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frames) all as specified and directed.

M & L welding in repairs exceeding 2.5 cm but not exceeding 5.00 cm in length and welded to not exc 6mm thick metal all as specified and directed.

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay etc complete all as specified and directed.

Supply and fix steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars devetailed or welded complete all as specified and directed.

S & F Solid PVC Door frame of size 50mm X 47mm made out of 5mmplain color PVC sheet reinforced with MS square tube all as specified and directed.

S & F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm thick plain colour PVC sheet on back face with particle board core as per specification all as specified and directed.

M & L Second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and as specified and directed.

S & F Pressed steel frames of size 165 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as supplied and fixed complete all as specified and directed.

M & L Flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M & L Glazed and skeleton shutters, second class hardwood, 35 mm thick open rebaed and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc; sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats all as specified and directed.

S & F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F Aluminium anodised, barrel tower bolts of extruded section, 200 mm long all as specified and directed.

S & F Aluminium anodised, barrel tower bolts of extruded section, 150 mm long all as specified and directed.

S & F Aluminium handles, cast type, anodised 150 mm long all as specified and directed.

S & F Aluminium handles, cast type, anodised 100 mm long all as specified and directed.

S & F Butt hinges 100 mm size, medium weight, cold rolled mild steel all as specified and directed.

S & F Figured glass 4 mm thick, pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane all as specified and directed.

S & F Ordinary rat tail rod pattern springs 300 mm including roller and roller plate complete in mild steel fixed to MS frame or wooden framed all as specified and directed.

S & F floor door stopper of aluminum alloy body and tongue,anodised with hard drawn steel spring overall length of cover plate140 mm, fixed in floor all as specified and directed.

S & F Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessaty' labours; articles not exceeding 200 cu. cm each second class hardwood all as specified and directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified

Supply and fix in repairs Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane including hacking out old glasses complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames all as specified and directed.

Supply & fix 4 mm thick Figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane all as specified and directed.

Supply & fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeeding 0.5 sq. m in each pane all as specified and directed.

S & F in repairs Double action spring hinges, 100 mm long mild steel with steel wire spring, stove enamelled black all as specified and directed.

S & F in repairs Mild Steel handles including nut & bolts as suitable (left & right side shutter) for existing steel window and ventilator & all as directed by Engineer-in-charge.

S & F in repairs Mild Steel Peg Stay including nut & bolts as suitable for existing steel window and ventilator & all as directed by Engineer-in-charge.

S & F in repairs double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed.

M & L in repairs 18/19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed to timber frame work as in cup board shelves etc complete all as specified and directed.

M & L Preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enemal paint over a coat of pink primer complete all as specified and directed.

M & L Preparation of old painted wood and wood based surfaces over 10 cm width or girth and applying one coat of Synthetic enamel paint all as specified and directed. .

M & L Preparation of new steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enemal paint over a coat of red oxide primer all as specified and directed. .

M & L Preparation of old painted steel surface over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L Applying Two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on new plastered surfaces of walls complete as mentioned in SSR and as directed .

Material & Labour preparing, washing, rubbingdown and complete removal of existing treatment for applying Two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on Old decorated surfaces of walls complete as mentioned in SSR and as directed .

M & L preparation of new plastered wall surfaces and applying two coat of oil bound distemper over 3mm thick layer of putty finished smooth surfaces all as specified and directed

M & L Complete removal of existing treatment of old decorated surface and applying two coat of oil bound distemper over 3mm thick layer of putty finished smooth surfaces all as specified and directed

M & L preparation of old decorated wall surfaces and applying two coats of white wash complete all as specified and directed

M & L Preparation of new plastered ceiling surfaces and applying two coats of white wash all as specified and directed

M & L Preparation of old plastered ceiling surfaces and applying two coats of white wash all as specified and directed

Taking down 25 or 32 mm bore steel tubing and connections all as specified and directed.

Taking down 20 mm bore steel tubing and connections all as specified and directed.

Taking down 15 mm bore steel tubing and connections all as specified and directed.

Dismantling water tanks of capacity exceeding 1000 ltrs and not exceeding 2000 ltrs all as specified and directed.

S & F Galvanised Iron tubing 25 mm dia, medium grade, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F Galvanised Iron tubing 20 mm dia, medium grade, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F Galvanised Iron tubing 15 mm dia, medium grade, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs 32mm dia flush pipe of polythene of low or high density or PVC for low level flushing cistern complete all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) double layered, hoisted and fixed in position including one ball valve high pressure of PTMT coated aluminium rod and high density plastic ball screwed for iron pipe 40 mm dia (minimum weight 690gms) complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) double layered, hoiseted and fixed in position including one ball valve high pressure of PTMT coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 40 mm dia (minimum weight 690gms) complete all as specified and directed.

S & F in repair PVC tank cover including fittings for fixing of cover to tank suitable for 500 to 1000 ltr capacity of PVC water tank all as specified and directed.

Disconneting existing tanks of capacity exceeding 500 ltrs to 1000 ltrs, setting aside (or lowering if required) for cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc. and reconnecting and re fixing in position after necessary cleaning and writing date of cleaning in white paint as "CLEANED ON (date) all as specified and directed.

S & F in repairs PTMT Nipple 20 mm bore suitable for HDPE water tank. (Minimum weight?45gm )all as specified and directed.

S & F in repairs PTMT Nipple 25 mm bore suitable for HDPE water tank. (Minimum weight 65gm) all as specified and directed.

Supply and fix in repairs vitreous china wash down water closet pan pedestal pattern white (excluding flushing cistern) including following accessories all as specified and directed. :- (i) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (II) Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook

Supply and fix in repairs vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with integral foot rest (excluding flushing cistern) including provn of lime concrete bedding etc complete all as specified and directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, PVC flush down pipe with bend etc complete all as specified and directed.

S & F in repairs Vitrious china wash basin white flat back of size 550X400mm including, waste coupling, pipe and cutting for and pinning in ends of brackets or erecting stand brackets etc complete all as specified and directed.

Supply and fix in repair Vitreous China Urinal, half stall type, including flushing pipe and waste coupling etc complete all as specified and directed.

S & F in repairs Pillar taps 15mm, brass chromium plated fancy type, round handle, screwed down, screwed for iron pipe and fixed all as specified and directed.

Supply and fix in repair bib taps 15mm fancy type, brass chromium plated, round handle, screwed down, screwed for iron pipe all as specified and directed.

Supply and fix in repair stop valves 15mm, fancy type, brass chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions and fixed all as specified and directed.

Supply and fix in repair Concussive push button taps 15mm , cast copper alloy, screwed for iron pipe and fixed all as specified and directed.

S & F PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed.

M & L High density polyethylene pipes (HDPE) 40mm bore dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors as drain out pipe etc. all as specified and directed.

Supply and fix in repairs Fancy type square shape swivel shower of CP for fixing with 15 mm pipe all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified and directed.

Supply and fix Towel Rail 600mm long chromium plated fixed with and including Chromium pated brass screws all as specified and directed.

Supply and fix wall mounted Sheet glass shelf assembly consisting of 5.5mm thick sheet glass corner shelf 300mmx300mm with chromium plated bracket guard and railing 60cm long all as speicfied & directed

S & F PTMT gratings doom 125 mm dia with waste hole (Minimum weight 40gms) all as specified and direceted

S & F in repairs Waste fittings 32 mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and direceted

S & F in repairs Waste fittings 40 mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and direceted

S & F in repairs Plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and direceted

S & F PVC low level Flushing cristern internal parts kit (PVC flush bend, Syphon set, flush tank inside & out side lever/handle, flush tank clamp, syphon washer and flush tank band washer, float valve/cock, band bowl etc) all as spcified and directed

S & F in repairs Ball valves 25 mm dia, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms all as specified and directed.

S & F in repairs Stack clamps suitable for 75 mm dia pipe made out of Flat iron 50 mm x 5 mm and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified and directed.

S & F in repairs Stack clamps suitable for 100 mm dia pipe made out of Flat iron 50 mm x 5 mm and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified and directed.

S & F in repairs Alumimium Hat pegs, solid body, 125mm to 175 mm in length all as specified and directed.

Supply and fix in repairs of Soap dish, any type, fixed to plugs with brass chromimum plated fixed with brass screws complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar of size 100 mm/ 75 mm all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia, single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia, single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required all as specified and directed.

S & F (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia inclduing fixing to existing pipe properly with solvent all as specified and directed

S & F PVC (SWR) bends for 75 mm bore pipe with access door all as specified and directed.

Supply and fix PVC SWR 75 mm dia branch pipe, singe (Single Y) equal or unequal provided with access door all as specified and directed.

Supply and fix PVC bends for 75 mm bore pipe all as specified and directed.

S & F (SWR) floor trap, plain with grating including jointing with solvent cement 110 mm dia inclduing fixing to existing pipe properly with solvent all as specified and directed

S & F PVC (SWR) bends for 110 mm bore pipe with access door all as specified and directed

Supply and fix PVC SWR 110 mm dia branch pipe, Double (double Y) equal or unequal provided with access door all as specified and directed

Supply and fix PVC bends for 110 mm bore pipe all as specified and directed

S & F PVC (SWR) vent cowl 110 mm dia all as specified and directed

Demolition of reinforced concrete, in suspended slabs, beams, lintels, etc in cement mortar or cement concrete (reinforcement out as required to facilitate demolition)

M & L for mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars of 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L Formwork to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for fair finished flat surfaces (horizontal or slopping) all as specified and directed.

M & L Reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed

Material and labour for 0.56 mm thick aluminium sheeting Plain, Alloy 31000 H4 in crumple portion all as specified and directed.

S & F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, waste pipe and wastes cupling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F 15mm Sink cock with regular swinging spoout with flange chromium plated , screwed down, screwed for iron pipe

S & F in repairs Stainless Steel curtain rails 25mm dia decorative type all as specified & directed

S & F in repairs Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified & directed

S & F in epairs Aluminium anodised barrel tower bolt 200 mm long fixed all as specified & directed s.

S & F in repairs stainless steel decorative curtain bracket, stopper, rollers etc all as specified & directed.

S & F in epairs aluminium anodised handle cast type 150 mm long all as specified & directed s.

M/s B C CHOUGULE

RAJENDRA KRISHNA SARAF

M/S ADITYA CONSTRUCTIONS

M/S. ADARSH ENTERPRISES

M/S MAHADEV M PATIL