Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹16.4 LAccepted-AOC | 1 | Accepted-AOC Lowest | |
| 2 | 2₹16.9 L+₹17,841 (1.07%)Rejected-Finance FLAT NO 4 C GH 39 MANSA DEVI COMPLEX SECTOR 05 PANCHKULA 134 109 HRY | PANCHKULA | PANCHKULA | HARYANA | 134109 | 2 | Rejected-Finance Other Than Lowest | |
| 3 | 3₹18.2 L+₹1.5 L (8.82%)Rejected-Finance A 95 SANJAY NAGAR BHARATPUR RAJ 321001 | BHARATPUR | BHARATPUR | RAJASTHAN | 321001 | 3 | Rejected-Finance Other than Lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Highground
AGE (I) Highground Air Force Station Highground Chandigarh
WELCOME MAINTENANCE AND MISC B/R REPAIR WORKS AT AF STATION HIGHGROUNG UNDER AGE (I) HIGHGROUND
2022_MES_542732_3
AGE/HG/T-01/2022-23
Open Tender
Civil Works
Item Rate
330 days
Chandigarh
as per tender documents
8 documents required · 8 mandatory
₹500
AGE (I) Highground
₹40,000
Yes
2 Dec 2022
10 Sept 2022
3 Oct 2022
10 Sept 2022
1 Oct 2022
17 Sept 2022
Amount
Disconnecting existing water tanks of capacity exceeding 250 ltrs but not exceeding 500 ltrs, draining out of water, setting aside (or lowering if required) for repair/cleaning and removing accumulated sluge/dirt scales from tank bottom, side and from mouths of circulating pipes of service tanks located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground "Cleaned on (date)" height of words 100mm, and hoisting if required, refixing and reconnecting in position after cleaning complete all as specified and directed.
Disconnecting existing water tanks of capacity exceeding 500 ltrs but not exceeding 1000 ltrs, draining out of water, setting aside (or lowering if required) for repair/cleaning and removing accumulated sluge/dirt scales from tank bottom, side and from mouths of circulating pipes of service tanks located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground "Cleaned on (date)" height of words 100mm, and hoisting if required, refixing and reconnecting in position after cleaning complete all as specified and directed.
Dismantling existing water tanks of size exc 250 Litre but n.exc 500 litre capacity and removal from site to store for reuse or credit, complete all as specified and directed.
Dismantling existing water tanks of size exc 500 Litre but n.exc 1000 litre capacity and removal from site to store for reuse or credit, complete all as specified and directed.
Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘triple layered’, hoisted and fixed in position including inlet, outlet, drain pipe with plug and PTMT ball valves, suitable for 15/20 mm bore iron pipe, (weight not less than 210 grams), ISI marked, high pressure, with high density plastic ball screwed for iron pipe and fixed, with epoxy coated aluminium rod complete all as specified and directed.
Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 1000 litres capacity ‘triple layered’, hoisted and fixed in position including inlet, outlet, drain pipe with plug and PTMT ball valves, suitable for 15/20 mm bore iron pipe, (weight not less than 210 grams), ISI marked, high pressure, with high density plastic ball screwed for iron pipe and fixed, with epoxy coated aluminium rod complete all as specified and directed.
Supply and fixing in repairs PTMT ball valves, suitable for 20 mm bore iron pipe, (weight not less than 210 grams), ISI marked, high pressure, with high density plastic ball screwed for iron pipe and fixed, with epoxy coated aluminium rod complete all as specified and directed.
Supply and fixing in repairs PTMT ball valves, suitable for 15 mm bore iron pipe, (weight not less than 142 grams), ISI marked, high pressure, with high density plastic ball screwed for iron pipe and fixed, with epoxy coated aluminium rod complete all as specified and directed.
Taking up or down existing steel water tubing and connections, 20 mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.
Taking up or down existing steel water tubing and connections, 15 mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.
Taking up or down existing steel water tubing and connections, 25 mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.
Supply and fixing galvanized steel water tubes, 15 mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.
Supply and fixing galvanized steel water tubes, 20 mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.
Supply and fixing galvanized steel water tubes, 25 mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.
Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, staging etc including segregating and stacking serviceable bricks for re-use and removal of rubbish/brick bats outside MoD land, complete all as specified and directed.
Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed
Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:4), using water proofing compound as per manufacturer's instructions, on brick/concrete surfaces of walls, finished even and fair , complete all as specified and directed. Note :- Supply only water proofing compound will be measured and paid for separately.
Supply only liquid water proofing compound, complete all as specified and directed.
Material and labour for rendering 10 mm thick in cement mortar (1:3), on concrete surfaces (such as top & sides of chajjas, beams, balcony, ceiling etc) , finished even and smooth without using extra cement , complete all as specified and directed.
Demolition of cement concrete(un-reinforced) of any description and in any position not otherwise specifically provided for and including removing soil to a distance exceeding 1.50 km but not exceeding 5 km(out side MoD land) and depositing where directed, complete all as specified and directed.
M&L plain cement concrete (1:2:4), type B-0 (using 12.5mm graded crushed stone aggregates) as in roof kerb, roof pading and like, including water proofing compound as per manufacturers instruction @3% of cement weight, complete all as specified and directed. Note:- Water proofing compoun shall be measured and paid separately.
Providing, plain cement concrete(1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,including water proofing compound as per manufacturers instruction @3% of cement weight, upto and including four storey bldg height/12.8mtr height, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.
Preparation of old plastered or unplastered surfaces of wall by brooming down with steel brushing, scraping down smoke spot, moulds, moss and efflorescent salts trading oil greasy spot etc, rubbing down and stopping of surface using sand paper and applying two coats of oil bound distemper on wall , complete all as specified and directed.
Material and labour preparation of newly plasterd surfaces of walls including chalk whitening and applying two coats of oil emulsion distemper, complete all as specified and directed.
Material and labour preparation of newly plasterd surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Material and labour for preparation of newly plastered ceilling surfaces and applying three coats of white wash complete all as specified and as directed.
Preparation of old plastered/unplastered surfaces of ceiling and brooming down with steel wire brushing, scraping down smoke spots, moss and efflorescent salts, trading oil and greasy spots etc including washing, rubbing down and stopping of surfaces using sand paper and applying two coats of white wash, complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of wall by brooming down with steel brushing, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spot etc, rubbing down and stopping of surface using sand paper and applying one coat of white wash on wall, complete all as specified and directed.
Material and labour for preparation of old steel or iron surfaces over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
Material and labour for preparation of old wooden surfaces over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
Material and labour for 75mm thick plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection, laid to slope of 1:20, finished fair & even, with joints 10mm wide having full depth @ 2.5m c/c at corners filled with mastic mortar, complete all as specified and directed.
Dismantling floor hearth or wall tiling or paver blocks or chequered tiles etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land complete all as specified and directed.
Material and labour for first quality Non Skid joint free ceramic coloured tiles 7 to 8mm thick, (square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18Sqm, as in floors etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 15mm thick screed bed/bedding layer in CM (1:6), complete all as specified and directed.
Material and labour for First quality, glazed designer pattern, jointed ceramic coloured tiles, 6-7mm thick, of size 450mm x 350mm or 450mm x 300 mm fixed in pattern as directed (combination of dark/light colour with border), on vertical surface such as in skirting, dados, risers to steps, etc., set and jointed in neat cement slurry @ 3Kg/Sqm, and including pointing in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 10 mm thick rendering in CM (1:4),complete all as specified and directed.
Material and labour for first quality vitrified ceramic coloured tiles 9 to 10 mm thick, (square/rectangular) (light shade), area of each tile not exceeding 0.36 Sqm, as in floors etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM(1:4), complete all as specified and directed.
Material and labour, vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in skirting, dado wall tiling etc. in light colour shade over and including 10mm thick cement plaster(1:3), including backing coat and pointed in white or coloured cement to match, complete all as specified and directed.
Material and Labour for Cutting chases in brick/stone work or concrete surfaces, pinning in making good to facings where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm in girth, including removal of rubbish outside defence land, complete aall as specified and directed.
Supply and fixing in repairs 75 mm cast iron floor trap,ISI marked, with mild steel CP grating including jointing to waste pipe, and set in cement concrete 1:2:4 as required, complete all as specified and directed.
Supply and fixing in repairs cast iron bends 100 mm bore,diminishing piece or tapers, with oval access door, ISI marked, fixed to pipes, complete all as specified and directed.
Supply and fixing in repairs cast iron bends 75 mm bore,diminishing piece or tapers, with oval access door, ISI marked, fixed to pipes, complete all as specified and directed.
Supply and fixing in repairs cast iron 75 mm bore branch pieces, single (equal or unequal), ordinary or rivetted (spigot or socket) or with parallel branches, complete all as specified and directed.
Dismantling Cast iron pipe dia 75 mm/100 mm laid in floor or wall or taking out of trenches and removing to store for reuse or credit, complete all as specified and directed.
Supply and fixing in repairs cast iron 100 mm bore branch pieces, single (equal or unequal), ordinary or rivetted (spigot or socket) or with parallel branches, complete all as specified and directed.
Supply and fixing 100 mm dia cast iron soil waste and vent pipes (sand cast), in any length, with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts & washers, complete all as specified and directed.
Supply and fixing 75 mm dia cast iron soil waste and vent pipes (sand cast), in any length, with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts & washers, complete all as specified and directed.
Supply and fixing Vitreous china wash hand basin, white, flat back, size 550mm x 400mm, including brackets and cutting for and pinning in ends of brackets or erecting stand, complete including waste coupling of PTMT (half or full threaded) (Minimum weight 32-45 gms), PVC waste pipe, brackets & including taking down old and removal of old from site, complete all as specified.
Supply and fixing vitreous china wash down water closet squatt pan, Indian type (Orissa pattern), of size 580mmx440mm, white with integral foot rests (excluding flushing cistern and flushing pipe but including CI ‘P’/’S’ trap), set in & jointed with appripriate adhesive/mortar including embedding in concrete and taking down old and removal of debris outside MOD land, complete all as specified and directed.
Supply and fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, Pedestal pan and trap also including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, seat and cover for pedestal pan complete all as specified and directed.
Supply and fixing in repairs 10 litre capacity virgin polypropylene (PVC) low level flushing cistern, ISI marked, white or coloured, valve less symphonic action type, with inlet, ball valve, float and handle, complete including PVC bend/ flush pipe, brackets and making all connections and removal of old from site to store for reuse or credit, complete all as specified and directed.
Supply and fixing in repairs angle stop valve, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, including removal of old to store for reuse or for credit, complete all as specified and directed.
Supply and fixing in repairs angle bib taps, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, including removal of old to store for reuse or for credit, complete all as specified and directed.
Supply and fixing in repairs bib tap long body, cast copper alloy, fancy type, chromium plated with capstan head, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, including removal of old to store for reuse or for credit, complete all as specified and directed.
Supply and fixing in repairs pillar tap, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, screwed for iron pipe 15mm bore dia and fixed to WHB and connections to iron pipe, complete all as specified and directed
Supply and fixing in repairs Towel rail 600mm long (between flanges), 20mm dia, 'D' type, brass chromium plated, fixed to walls with steel screws and plastic cleats, complete all as specified and directed.
Supply and fixing in repairs PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450 mm long suitable for 15mm dia bore pipe, complete all as specified and directed.
Supply and fixing in repairs PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 600 mm long suitable for 15mm dia bore pipe, complete all as specified and directed.
Supply and fixing in repairs Stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mmx330mmx160mm, with and including PVC waste pipe and CP waste coupling 32 mm and making good to disturbed surfaces complete all as specified and directed.
Supply and fixing in repairs grating doom PTMT 125 dia with or without waste holes (minimum weight 40 grams), fixed on floor/nahani trap with cement mortar, complete all as specified and directed.
Supply and fixing in repairs PTMT waste coupling suitable for 32mm dia bore discharge pipe & flexible pipe suitable for WHB/Urinal, complete all as specified and directed.
Supply and fixing in repairs flexible waste pipe suitable for WHB/Sink/Urinal, complete all as specified and directed.
Supply and Fixing in repairs Brass chromium plated shower rose 125 mm size with or without swivel joints, fancy type with CP arm concealed type with CP cup including fixing to steel pipe or union 15mm bore complete all as specified.
Supply and fixing in repairs, stainless steel Chromium plated jet including PVC pipe of suitable length for European/ pedestal type WC including all accessories complete all as specified and directed.
Supply and fixing in repairs Chromium Plated Soap Dish complete all as specified and directed
Supply and fixing in repairs, brass CP wall mixer with telephone shower arrangement 15mm bore for mixing hot or cold water screwed down for iron pipe for wall, including connections to shower and making good the disturbed surfaces, complete all as specified and directed.
Supply and fixing in repairs, brass CP mixer for mixing hot & cold water screwed down for 15 mm bore dia of iron pipe for WHB, including connections to WHB and making good the disturbed surfaces, complete all as specifed and directed.
Supply and fixing in repairs 20 mm bore dia Gun-metal globe or gate valves, with iron wheel head, screwed down, high pressure,heavy duty, ISI marked , screwed both ends for iron pipe or for unions of 15mm bore dia complete all as specified and directed.
Supply and fixing in repairs 15 mm dia stop valve, cast copper alloy, fancy type, long shank and cup (concealed), chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia including cutting to wall tiles or brick work and making good the disturbed portion in cement mortar 1:3, complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame), not exceeding 1.5 Sqm each and removing from site as in Sch of credit and removal of debris outside MOD land, complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame), exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site as in Sch of credit, and removal of debris outside MOD land, complete all as specified and directed.
Taking down shutters of any description not exceeding 1.00 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed
Material and labour for cutting holes in brick wall built in cement mortar for taking out/ inserting hold fasts , and making good disturbed portion in cement mortar (1:3) or cement concrete 1:2:4 type B-1 as required, depth of embedded portion of hold fasts measured from the face of the jamb into the wall exceeding half brick but not exceeding one brick thick , and removal of rubbish outside defence land complete all as specified and directed. (Note:- Item applicable for insertion of hold fasts at new position only)
Supply and fixing factory made pressed steel frames for doors with two rebates, of size 125 mm x 60mm, made out of 1.25mm thick sheet, including PCC 1:3:6 type C-0 filling, one shop coat primer and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
Material and labour, Plain Cement Concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregate, filled inside the pressed steel frame and for fixing of hold fast, complete all as specified and directed.
Supply and fixing flush shutters 30mm thick, solid core construction with block board core and plywood face panels commercial type on both sides, complete all as specified & directed.
Supply and fixing Factory made box type steel window with 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3.
Supply and fixing factory made box type steel window with 2 Nos 150mm mild steel tower bolt to each shutter, steel handle and without glazing bars, including flat iron 12x3mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing no CEAF/STD-185-2012 sheets 1/2 & 2/2.
Supply and fix, Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, in opening, complete all as specified and directed.
Supply and fixing factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick Moulded prelaminated PVC sheet on the front face & 2 mm plain colour prelaminated PVC sheet on back face supplying and fixing in frame at site as shown in drawing in SSR complete all as specified & directed.
Supply and fixing to chowkhats 40 mm thick 2nd class hard wood plain, framed pannelled shutters (any number of panels), with panels of timber flat on both sides(feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.
Supply and fixing second class hard wood 35 mm thick plain, glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part I, Section 8, Clause 8.24(a), kiln seasoned and chemically pressure treated , supplied and fitted to chowkats complete all as specified and and directed. Note:- Glass or Wire cloth in panels will be measured and paid separately.
Supply and fixing butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, ISI marked, complete all as specified and directed.
Supply and fixing in repair, 150mm long, aluminium anodised, barrel tower bolts of extruded section and fixing to wooden or PVC doors, complete all as specified and directed.
Supply and fixing, 200mm long, aluminium anodised, barrel tower bolts of extruded section and fixing to wooden or PVC doors, complete all as specified and directed.
Supply and fixing, 150 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.
Supply and fixing Aluminium alloy, anodised, sliding door bolts 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.
Supply and Fixing, mild steel 300mm long, ordinary rat tail rod pattern MS door springs including roller and roller plate, complete all specified and directed.
Supply and fixing in repairs 2nd class hardwood fillets of sectional area exc 6 but nexc 13 sqcm, clean sawn, wrought finished, secured with screws, complete all as specified and directed.
Supply and fixing continuous (piano) hinges mild steel, bright finish or electrogalvanised flap size 30mm, complete all as specified and directed.
Supply and fixing aluminum anodised hasp and staples, 100mm size, safety type, with mild steel hing pin, including bolt to hinge plate and fixed with screws, complete all as specified and directed.
Supply and fixing in repair aluminum anodised hasp and staples, 100mm size, safety type, with mild steel hing pin, including bolt to hinge plate and fixed with screws, complete all as specified and directed.
Supply and fixing 40mm dia cupboard knobs ,bright finished, brass polished, fixed with nut, screw and washer, complete all as specified and directed.
Supply and fixing in repairs 40mm dia cupboard knobs ,bright finished, brass polished, fixed with nut, screw and washer, complete all as specified and directed.
Supply and fixing Magnet catcher suitable for kitchen cabinate/cupboard with steel plate and stainless steel as required complete all as specified and directed.
Supply and Fixing MS Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.
Supply and fixing in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins, complete all as specified and directed.
Supply and fixing plain sheet glass 4 mm thick, ordinary quality, not exceeding 0.50 Sqm in each pane, and glazing with oil putty and securing pins, complete all as specified and directed.
Supply and fixing figured sheet glass 4mm thick, pin headed type, not exceeding 0.50 Sqm each pane, and glazing with oil putty and securing pins, complete all as specified and directed.
Material and labour applying two coats of synthetic enamel paint over and including a coat of pink primer, on new wooden surfaces over 10cm width or girth, including preparation of wooden surface, complete all as specified and directed.
Material and labour, applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed.
Supply and fixing in repair drapery rod of stainless steel 25mm dia ribbed/fancy type includinng brackets and finals as required, complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and removing rubbish outside defence land complete all as specified and directed.
Material and labour for 20mm thick Granite (of any type) work, machine cut, (table rubbed and polished) as on cooking platforms, counter-slabs, window cills, steps and like, set in neat grey cement slurry @3Kg/Sqm, laid over and including 15mm thick bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including cutting for counter WHB, moulding the corners/edges and making holes for cooking gas, grinding & polishing, complete all as specified and directed.
Material and labour for 20mm thick Granite (of any type) work, machine cut, as skirting/dado laid over cement screed and jointed in neat grey cement slurry, laid over and including 10 mm thick bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including cutting and moulding the corners/edges, grinding & polishing, complete all as specified and directed.
Supply and fixing in repair, vitereous china counter top (self rimming) wash hand basin, white in colour of size 630mm x 500mm including circular cutting and tucked in granite slab, including 15mm dia cast copper alloy chromium plated fancy type single lever basin mixer, 32mm dia brass CP waste fitting and connection to waste pipe and water pipe, complete all as specified and directed. Make: Hindware, Model: RHAPSODY, Cat No :10045 or equivalent in Cera.
Supply and fixing in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, tank nipple Tee, reducer sockets for 15 mm bore pipe, complete all as specified and directed.
Supply and fixing in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, tank nipple Tee, reducer sockets for 20 mm bore pipe, complete all as specified and directed.
Supply and fixing in repairs 18mm/19mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc, including fixing 18mm wide 6mm thick beading of 1st class HW (Teak) all around, including removal of old to store for reuse or credit, complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for including removal of debries out of defence land and stacking of scrap iron complete all as specified and directed.
Material and labour for Reinforced Cement Concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. Note: Reinforcement steel bars and form work shall be measured and paid separately.
Formwork to sides & soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc.also splays between floors and beams, etc. complete all as specified and directed.
Material and Labour for TMT steel bars, 10 mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 110mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with suitable size of mild steel clamp and screw, including making good mouth of rain water pipe in cement mortar 1:3 or PCC 1:2:4 complete all as specified and directed.
Supply and fixing 110mm PVC (SWR) bends any radius, complete all as specified and directed.
Material and labour for welding in repairs exceeding 2.5cm but not exceeding 5cm in length and thickness of metal to be welded not exceeding 6mm, complete all as specified and directed.
Material and labour for running welding in repairs, thickness of metal to be welded exceeding 6mm but not exceeding 9mm, complete all as specified and directed.
Supply and fixing bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
Dismantling brick tiles or terracing tiles, single layer on roof including segregating and stacking serviceable brick tiles and removal of unserviceable brick tiles / brick bats and rubbish outside defence land, complete all as specified and directed.
Taking down existing bitumen felt roof treatment including cement mortar bedding layer, cleaning the surface and removing rubbish off the premises of MoD land, complete all specified and directed.
Demolition of mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof), including removing soil exc 1.50 km but n exc. 5 km(out side MoD land) and depositing where directed, complete all as specified and directed.
Material and labour for 15mm thick cement plaster on roof or wall surfafes in cement mortar (1:4) mixed with WPC as per manufacturer's instruction @ 0.2Ltr per 50kgs by weight of of cement on concrete surfaces,finished even and fair without using extra cement, after applying neat cement slurry @ 3Kg/Sqm, including wire brushing sweeping, cleaning, washing down to remove all loose dust etc and preparing roof surfaces, complete all as specified and directed. Note:- WPC will be measured and paid separately.
Material and labour for water proofing treatment of RCC roof/sunken floor consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30litre/Sqm including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60Kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps (100mm side lap and 150 mm end lap ) & joints with flame (by torch application) all as per manufacturer’s instructions complete all as specified and directed.
Material and Labour for cutting out cracks to 'V'-section in existing RCC roofs or terracing, cleaning out , wetting, grouting with cement slurry 1:3, complete all as specified and directed.
M&L for 40mm thick brick tiles laid on 15mm thick cement mortar screed bedding in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska, complete all as specified and directed.
All as per serial item No 130 here-in-before (but except brick tiles), complete all as specified and directed. Note : (i) Old serviceable ties as obtained from Serial item No 124 here-in-before shall be reused. (ii) The cost of cleaning and washing of brick tiles for re-use, shall be deemed to be included in the unit rate quoted by the tenderer.
M&L for PCC (1:2:4)type B-0, using 12.5mm graded stone aggregates, using integral water proofing compound @3% by weight of cement as in to sunken floor. Coving /gola to junction of the floor and vertical walls including chamfering on edges, complete all as specified and directed. Note:- Supply only waterproofing compound shall be measured and paid separately.
Material and labour for cement concrete 1:5:10 type E2 in foundation filling and mass concrete using 40mm graded stone aggregate in sunken floor, complete all as specified and directed.
Supply and fixing shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), complete all as specified and directed.
Supply and fixing in repair PVC water storage tank lid cover suitable for 1000/500 ltr capacity complete all as specified and directed.
Supply and fixing flush shutters 25 mm thick, solid core constuction, with block board core and plywood face panels commercial face on both side complete all as specified and directed.
Supply and fixing in repair door seal 50 mm wide with aluminium back plate & with nylon brush fixed with screws complete all as specified and directed.
Supply and fixing in repair (health faucet) hand shower cast copper alloy chromium plated with and including 8 mm dia 1 metre long flexible tube and with hook complete all as specified and directed.
Supply and fixing in repair PVC syphon with float valve and washer set complete in PVC flushing cistern of 10 ltr capacity complete all as specified and directed.
Supply and fixing in repair PVC cabinet mirror of size 400 mm x 500 mm as approved by AGE(I) complete all as specified and directed.
Note: The total amount shall subject to adjustment of credit of Rs 32979.00 for old Materials as per Schedule of Credit
Babu Ram Sud and Sons
M/S V K Construction Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .