REPAIR/ CLEANING OF SEWAGE LINE, MAN HOLES, SEPTIC TANK, SOAK WELLS PATH/ HARD STANDING, FENCING, BOUNDARYWALL AT MIL STN KALKA UNDER GE JUTOGH

Amount

Cleaning the septic tank/sludge chamber of any depth/area/condition incl taking out stagnated sludge or any other material mixed with the sludge etc deposited in the septic tanks, filling in closed container and depositing in excavated pit, at least 500m beyond nearby living accn or area as marked by station controlling authority, covering the pit with earth after depositing sludge, sprinkling fresh lime on covered pit and around septic tanks/ soakage wells to make it hygenic complete all as specified and directed. Note:- (i) Cost of pumping with mechanical sewage pump, excavation of earth pit and fresh lime shall deemed to be included in the quoted rates. (ii) Charges of covered container incl its transportation shall deemed to be included in the quoted rates. (iii) Depth of liquid sludge in the septic tank will be determined and recorded before commencement of work by any Engg conventional method in the presence of Engr-in charge and Contractor.

Cleaning of SGSW/CI pipe lines of 150mm dia laid in trenches or fixed to wall/ floor incl desilting /desludging intermediate manholes of any size and depth, removing sludge outside of MoD land in a covered container, atleast 500 m beyond nearby living accn, depositing the sludge in a excavated pit, covering the pit with earth after depositing sludge, sprinkling fresh lime over the pit and around manholes complete all as specified and directed. Note : Charges of covered container incl its transportation charges, cost of fresh lime and earth pit shall deemed to be included in the quoted rates.

Removing spot blockage of WC/Nahani trap / gully trap incl cleaning of sewage line / manholes up to and incl 1st manholes and disposal of material obtained from cleaning to outside Defence land and disposed complete all as specified and directed.

Cleaning of manholes of any size and depth incl getting out solid/ sludge from manholes and removing the foul contents to any place outside of Defence land incl cleaning with fresh water complete all as specified and directed.

Excavation in trenches in hard/dense soil n. exc 1.5m wide and n. exc 1.50m deep and getting out complete all as specified and directed.

Returning filling in incl spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.

Removing excavated materials to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M & L for salt glazed stone ware drain pipe grade 'A', laid in trenches and jointed in CM, internal dia of pipe 150 mm incl providing concrete bed to drain pipes 150mm dia (SGSW) in cement concrete (1:4:8) Type D-2 including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

S&F reinforced concrete pipes class, NP-2, laid and jointed complete with collars 300mm bore of pipe incl providing concrete bed to drain pipes 300mm dia (RCC) in cement concrete (1:4:8) Type D-2 including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in slab for roofs, landing, balconies , canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof , floor slabs, landing or similar work, n.exc 200mm thick (horizontal or sloping), flat rough finished complete all as specified and directed.

S & F TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F TMT bars 6-8mm dia, cut to length, bent to shape required incl cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Cutting in to existing manholes/outlet chamber of safety tank for connecting drain pipes making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished and reforming benching as required, for 150 mm internal bore pipe complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc incl raking out joints, hacking for key, scrubbing down with water etc in patches at any height complete all as specified and directed

Demolition of brick or stone masonry, built in cement mortar incl all quoins, pillars, arches etc but excluding ashlar facing complete all as specified and directed.

M & L for brick work, with sub class 'B', bricks kiln well burnt, old size bricks, straight or curved on plan exc 6 m in mean radius, built in cement mortor (1:4) complete all as specified and as directed .

M&L for brick work with subclass 'B' bricks, straight or curved on plan any radius, built in cement mortar 1:4, in half brick thick wall complete all as specified and directed.

M & L for cement plaster 15mm thick on fair faces of brick walls or stone surfaces, in cement mortar (1:4) mixed with WPC @ 3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid for separately.

M & L for PCC 1:2:4 type-B-1, using 20 mm graded crushed stone aggregate ) as in surface channel and drains including necessary form work complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed

Demolition and breaking up drain pipes up to 150mm dia (SGSW/AC/PVC or reinforced concrete pipe) set in cement mortar incl concrete bed to drain pipes, complete all as specified and as directed.

S & F PVC (SWR) pipes 110 mm bore single socketed, in any length, with rubber ring joints, laid in trenches or under floors, inserted in retaining wall etc complete all as specified & directed.

S & F PVC (SWR) pipes 75mm bore single socketed, in any length, with rubber ring joints, laid in trenches or under floors, inserted in retaining wall etc complete all as specified & directed.

S & F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified & directed.

S & F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified & directed.

S&F in repair 110 mm dia PVC (SWR) bends with access door complete all as specified.

S&F in repair 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal with access door complete all as specified & directed.

S&F 75mm bore PVC (SWR), junction single, (Single T) equal or unequal with access door complete all as specified & directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete un-reinforced in ground floor and paving, not exc 15cm thick complete all as specified and directed .

M & L for 100mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in base/ flooring finished even and fair complete all as specified & directed.

M & L for 75mm thick PCC 1:4:8 , type D-2 using 40mm graded crushed stone aggregate) as in sub base under floors, surface finished even and fair to receive top finish, all as specified and directed.

M&L for 300 x 300/400x400x 9 to 10 mm thick, coloured, Endura heavy duty tiles, pre cast factory made, laid in floors or fixed to wall, set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, laid over and incl 20 mm thick screed bed in CM (1:6), surface finished even and rough to receive the tiles complete all as specified and directed. (Colour and shade of tiles will be approved by GE)

M&L for Machine pressed coloured precast concrete interlocking paver block glossy finish, any size and shape, conforming to IS 15658-2006, of 80mm thickness, M-40 Grade with grey cement and pigment, laid over and including 40mm thick (average) stone dust cushioning and joints filled with sand complete all as specified and directed.

M & L Chequered cement concrete tiles pre polished 30cmx30cmx22-25mm thick, set ,jointed and pointed in neat cement slurry with grey cement and pigment in floors complete fixed over and incl 20mm thick screed bed or bedding layer in CM 1:6 for laying floor tiles all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, incl taking out embedded portion in ground/ PCC and making good disturbed surfaces complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

Excavating in post holes in hard/dense soil (or similar holes) each n. exc 0.50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for PCC 1:2:4, type B-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete or for columns footing, posts etc. complete all as specified and directed.

S&F Mild steel work as in post and struts in fencing incl cutting tops to shape as directed,drilling holes,notching for wire,etc,flat iron fillets ( for securing wire mesh etc.) incl all necessary drilling,bolting or riveting,etc and similar work, conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10cm long,dia of neck 5 to 10 mm complete all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F Mild steel bars 10 mm dia and over, cut to length, bent to shape required incl hooking ends, fixed horizontaly in wire mesh to hold it straight, tightened at post/ struts, conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F chain link MS galvanised fencing wire mesh of size and dia as ordered, fixed to posts and struts with bolts or screws complete all as specified and directed. Note: Size and dia of wire mesh will be decided by GE

Dismantling structural steel work including doors, gates but excluding framed trusses etc. complete all as specified and directed.

S & F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (inclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, conforming to Fe-290,Grade-E165 complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description, not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M & L for PCC1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M & L for precast solid blocks as in curve stone of PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) exc 10 cm in width set in CM 1:4 complete all as specified and directed .

R. P. Suppliers and Construction Co.

m/s jupiter builders