8390 REPAIR TO JOINERY FLOORING PARTITIONS AND CERTAIN MISC WORKS AT DOCKYARD HOUSE RAFIYA MANZIL AND CERTAIN OTHER AREAS UNDER AGE BRII UNDER GE NW KUNJALI

Amount

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately).

M&L for applying a coat of bituminous primer conforming to IS-3384 @ 1.20 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. Over the coat of primer applying a coat of bituminous coat 85/25 @ 1.20 Kg/Sqm. Providing and laying five layered 4 mm thick APP (Atatic poly propylene) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm as specified here-in-after. The APP membrane shall be laid using LPG torch-on-application with minimum 100 mm side overlap and 150 mm end overlap. The laying of membrane shall be got done through an authorized applicator of manufacturer of the membrane. The APP membrane shall be taken upto minimum 200 mm on vertical surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provde requisite slop towards rain water pipe outlet. Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of primer for APP membrane and SBR latex complete.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) cement concrete as a leveling course on roof surfaces and coping etc. complete all as specified and as directed.

Material and labour protecting the roof with water proofing coating (Dr. Fixit) aomplete as specified below complete all as specified and directed :- (a) Wire brush the surface to remove existing treatment and loose particles and laitance wash with clean water. (b) complete crack filling and reinstate damaged portion shall be filled with polymer modified mortar as recommended. (c) Allow the repair surface to csure for 24 hours afterwards wet the surface to a SSD condition. (d) Apply one coat of primer by brush and allow to dry for 4 hours . (e) Apply one coat of water proofing coating over the primed surface by brush. (f) On the wet primed surface overlay a open woven fiber glass mesh min 40 GSM of size 2 mm x 2 mm and allow it jto soak completely. (g) Immediately there after apply the second coat jwijth a roller to ensure complete coverage of the fibre mesh. (h) Apply the 3 rd coat after 6 to 8 hours, once the 2nd coat is dry. Make : Csrack filler - Dr. Fixit crack-X Paste, Dr. Fixit crack - X shrinkfree, Shaliseal CPM of M/S STP Ltd. Prime coating : Dr. Fixit primeseal, water proofing coating : Dr. Fixit new coat, waterseal concentrate of M/S Krishna Conchem Products, Shalicry 215 of M/S STP Ltd

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C deistane 30 CM to make PVC frame as per specification and drawing complete all as specified and directed.

S&F PVC wall paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as directed.

S&F 8 to 10 mm thick wooden flooring as per manufacturer instructions all as specified and directed . (Make - Pergo/Hego).

S&F roller/venetian blinds vertical/horizontal type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and as directed.

M&L for false ceiling made out of 600x600x 4 to 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed. (Make -Armstrong/Chanakya/Everest).

M&L for POP false ceiling using 600x900x12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25mm spaced at 750mm centre, secondary joist of size 75x20mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.5 M C/C, including dismantling old unserviceable false ceiling, complete all as specified and directed. Including Taking down old false ceiling and rubbish off the premises.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each complete all as specified and directed.

Taking down shutters of any description n.exc 1.00 Sqm each complete all as specified and directed.

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and directed.

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified

S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partion/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant etc all as specified and as directed.

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as required manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick all as specified and as directed

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc. complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc. complete all as specified and as directed.

S&F in repairs 18/19 mm thcik prelaminated partical board exterior grade prelaminated one side with lamination and other side balancing white lamination fixed with screw to frame work cupboard etc including 6 mm thick teak wood beading all around complete all as specified and directed.

All as per Srl item No 28 here in before but 9 mm thick pre-laminated partical board fixed in repairs.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

S&F butt hinges 100 mm mild steel hinges medium weight and fixed complete all as specified and directed.

S&F butt hinges 100 mm stainless steel hinges medium weight and fixed.

S&F butt hinges 75 mm mild steel hinges medium weight and fixed complete all as specified and directed.

M & L for MS flat for hold fast. Conforming to Fe-310-0 or Fe-410-0 complete all as specified and directed.

S&F in repairs 125 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs fancy type drapery rods, powder coated aluminium of 20-25mm size with fixing brackets, Knobs rollers etc.all as specified.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plans to any radius in half brick thick walls built in cm (1:4) complete all as specified and as directed.

All as per Srl item No 45 here in before but except bricks

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L for Factory made machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 50 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed.

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 50 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed.

M&L for Factory made machine pressed cheqered cement, glossy finished of approved coloured tiles of size 250mmx250mmx22mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and direcetd.

Providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs, water troughs and the like including weathering slightly rounded or chamfered angles and throating all as directed.

Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws as specified.

M&L for rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates conforming to grade Fe 290 (Gde-E-165) incl one shop coat of zinc chromate primer incl preparation of surfaces complete all as specified.

Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M &L for machine cut kota stone slab flooring 18 to 20 mm thick as in steps, landings, floors etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing incl making 02 Nos grooves in steps over & incl 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land

Dismantling cast iron or reinforced concrete drain pipes of dia upto 100 mm jointed in cement mortar fixed to wall of high rise buildings and taking out from trenches as required complete all as specified and directed.

S&F 100 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with MS clamps complete all as specified and directed.

S&F 75 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with MS clamps all as specified and directed.

S&F in repairs CI Bends 100 mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repairs CI Bends 75 mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

M&L in repairs Cast iron nahani trap with grating including jointing to waste pipe run lead 100 mm complete all as specified and directed.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S&F 160mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with ms clamps all as specified and directed.

S&F 160mm dia bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius all as specified and directed.

S&F 75 mmbore PVC (SWR) bends any radius all as specified and directed.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers including taking down existing GI water tubing complete all as specified and directed.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers including taking down existing GI water tubing complete all as specified and directed.

S&F in repair Vitreous china water closet pan of size 380x725x690 mm, Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern Fittings, complete with and including all accessories & S Trap - 300 mm complete all as specified and as directed. (Make - Jaquar CAT Part No. - ONS-WHT-10853S300UFSM or equivalent as approved by GE)

S&F in repair wash hand basin vitreous china white/coloured size and design as directed including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified. (Make - Jaquar/Cera or equivalent as approve by GE).

S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs

S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S & F in repairs white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, including P/S trap of 100mm dia etc, complete all as specified and directed.

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified,

S&F in repairs plate rack made of stainless steel, 600 x 750X0.55mm including fixing as per manufacturers instruction.

S&F in repairs sinks with drainage bard made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwar wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs sink cock 2 way (Hot and cold) fancy type chromium plated pattern/design as directed. (Make - Jaquar CAT Part No. -CON-321KNB or equivalent as approved by GE)

S&F in repairs 3 way mixer shower (Hot and cold) fancy type chromium plated suitable for connected plumbing work complete all as specified and as directed.

S&F in repairs fancy type two way CP WHB mixer (Hot and cold) 15 mm bore complete all as specified and as directed.

S&F in repairs SS grating 100 mm dia complete all as specified and as directed.

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and as directed.

S&F in repairs fancy type angle valve chromium plated cast copper alloy 15mm bore with crutch or butter fly handle complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated soap container (soap dish) fixed with chromium plated bross screw and wooden / plastic cleats etc complete all as specified and as directed.

S&F in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and as directed.

S&F in repairs cast copper alloy chromium plated towel rack 600 mm long with lower hangers all as specified and directed. (Make - Cera/Jaquar or equivalent as approve by GE).

S&F in CP toilet roll holder with flap all as specified and directed.

S&F in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook complete all as specified and directed. (Make - Cera/Jaquar or equivalent as approve by GE).

S&F in repairs Corner glass shelf with brackets complete all as specified and directed. (Make - Jaquar CAT PART NO -ACN-1173 or equivalent as approve by GE).

S&F in repairs CP towel ring square with round flange all as specified and directed. (Make - Jaquar CAT PART NO -ACN-1121N or equivalent as approve by GE).

S&F in repairs PVC bathroom cabinet with 4mm thick looking mirror of overall size 450mm x 300mm of approved tint and pattern and drilling in and fixing with 02 Nos. chromium plated screws complete all as specified and as directed

S&F overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system all as specified and directed. (Make- Jaquar CAT PART NO- OHS-1989 or equivalent as approve by GE).

S&F hand shower 95 mm dia incl easy flex tube in chrome finishall as specified and directed . Make - Jaquar Cat Part No HSH-1737 and easy flex tube Cat Part No SHA-571 or equivalent as approve by GE).

S&F in repairs concealed stop cock 15mm dia bore fancy type ,all as specified. Make : Jaquar cat part No FLR-5083NK or equivalent as approve by GE).

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs PVC valveless syphonic action type, flushing cistern Low level white, with inlet ball valve, float and handle 10 Ltr capacity including brackets complete all as specified and directed.

S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern complete all as specified and directed.

S&F 18/19 mm thick modular kitchen boards glossy finish both sides made of 18/19 mm thick marrine plywood with machine pressed 0.9 mm thick sunmica over ply wood all as directed. (Colour and design shall be approved by the Engr-in-Charge).

S&F for modular kitchen drawer side channel of standered size and including roller for moving drawer, mild steel bright finish, or electrogalavanised, width of flap 30mm and length 600 mm complete all as specified and directed.

S&F for modular kitchen brass handle cast type bright finished handles of size 125mm, fabricated type complete all as specified.

S&F for modular kitchen stainless steel multi purpose bracket in wooden/partitions for storing rations types made of 4mm dia stainless steel rods, fixed in side partition etc complete all as specified Make : Usha Shriram Enpt Pvt Ltd or equivalent as approve by GE).

S&F for modular kitchen stainless steel luddel craddle hanging stand for cutlery all as specified and directed by Engineer-in-Charge Make : Usha Shriram Enpt Pvt Ltd or equivalent as approve by GE).

S&F for modular kitchen stainless steel zero crank hinges fancy type (with euro concealed hinges Make : VAIS GOLD) fixed to shutter in cub board of standered size and shape all as directed.

S&F rotational moulded polythylene water storage tank of 500 ltr capacity (Cylindrical vertical with closed top) ISI Marked, hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms )including dismantling water tank complete all as specified in SSR Part I and as directed.

S&F rotational moulded polythylene water storage loft tank tank of 300 ltr capacity ISI Marked, hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms ) including dismantling water tank complete all as specified in SSR Part I and as directed.

S&F rotational moulded polythylene water storage tank of 1000 ltr capacity (Cylindrical vertical with closed top) ISI Marked , hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms )including dismantling water tank complete all as specified in SSR Part I and as directed.

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) all as specified and directed.

M&L Plastering 15mm thick on brick work or concrete surfaces in cement mortar 1:6, finished with Neeru finish on walls complete all as specified and as directed.

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed.

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:3 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions including necessary scafolding for high rise bldgs etc complete all as specified and as directed. (Note:-Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified and as directed.

Dismantling single layer mangalore pattern or similar tiles in roofing laid dry complete all as specified and as directed.

All as per item No 129 above but bedded in cement mortar

Dismantling of tile battens of any size incl fillets spacing exc 15 cm complete all as specified and as directed.

Dismantling of unframed timber scantling 40sqcm and over in section in any position all as specified.

Dismantling of unframed timber scantling under 40sqcm in section in any position all as specified.

Dismantling boarding of any description, fixed in any postion with nails complete all as specified and as directed.

M&L for second class hard wood timber scantling clean sawn unframed complete all as specified and as directed.

All as per item No 135 but except timber

S&F 2nd class HW plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 but n.exc 25 sqcm fixed with nails all as specified and directed.

M&L for 2nd class HW battens for tiles etc clean sawn sectional area exc 15 and n.exc 25 sqcm and spacing of 30 cm centres

M&L for roof tiles, Mangalore pattern , interlocking at side joints laid dry complete all as specified and as directed.

M&L for ridge tiles mangalore pattern bedded and jointed in cement mortar 1:6 complete all as specified and as directed.

M&L for preparing the surfaces of tiles battens new or old of any size and spacing and applying two coats of creosote oil all as directed (measured over all one side only, spaces not deducted).

S&F for 2nd class HW boarding 25 mm thick planed one side with butt joints and fixed with nails in any position complete all as specified and as directed.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer complete all as specified and as directed.

M&L for preparation of newly plastered plastered surfaces of ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of plastered /unplastered surfaces of ceiling surfaces and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc all as specified and directed.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper all as specified and directed

M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds etc all as specified and directed.

M&L Complete removal of existing treatment of old decorated surfaces of walls soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement base primer with necessary scafolding for high rise bldgs. etc all as specified.

M&L preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs etc all as specified and directed.

M&L for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint including external window with necessary scafolding for high rise bldgs.

M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces.

M&L for varnishing in wooden hand rail including preparation of new surfrace complete all as specified and as directed.

M&L for 20 - 25 mm thick machine cut cudappah stone slab as in cills, cooking platform, working table etc and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

MADHU ENTERPRIZES

SB CONSTRUCTION

SACHINENTERPRISES

SHREE JAGDISH FURNITURE CO.