PROVN OF ONE GOODS LIFT FROM OUTSIDE OF THE BUILDING BASE PLATFORM FOR WING OF STORAGE ACCN BUILDINGS NO. 2 CGSD (MBI) AT CG OTM PROJECT AT PANVEL MUMBAI UNDER GE DAMAN

Amount

NOTE:- Schedule ‘A’ Part - I is under Ser No. 2.00 and is Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6.

SCHEDULE ‘A’ PART-I (BUILDING & STRUCTURE WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART -II (MISCELLANEOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' F ' signifies this fact only.

Design, supplying, testing & commissioning of goods carriage lift (Machine Roomless) 4000 Kg capacity, speed 0.5 m/s with single speed motor, 415 volts, 3 phase AC, 50 Hz supply, conforming to IS-14665 and as amended, suitable to serve G+1 upper floor with AC variable voltage and variable frequency Drive (VVVF drive) complete with all standard acessories, simple automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, Infra red sensor in full height of door & built in announcing system without hand set (02 Nos, one in car, near Ground floor landing door) complete all as specified with the following details. (a) Type of lift: Traction Gearless Goods Lift (Goods cum Passenger) Machine Roomless (b) Load Capacity: 4000 Kg (c) Speed: 0.50M/s (d) Power Supply: 415V, 3 Phase, 4 wire, AC 50 Hz (e) Type of drive AC variable Voltage & vairable frequnecy drive (f) Type of machine: Gearless Traction Machine (g) Car Size : 2500 mm Wide X3000 mm Deep X 2400 mm Height (h) Car Door and Landing door: Automatic 4-panel, Centre Opening Sliding Type, Stainless Steel Doors with hairline finish (N-304) of standard thickness 1.2 mm for car landing at all floor (i) Terminal Buffer: Special Spring buffer (j) Door opening (inside): 2100 mm Wide X 2100 mm Height (k) Counter weight: Made of Cast Iron/ MS profile cut (l) Car & Counter weight Guide: Machined Tee for Car 127 x 89 x 16 mm & CWT 82 x 68 x 09 mm (m) Flooring: Aluminum chequered plate 5 mm thick

(n) Indicators: Combined luminous hall buttons with 7 segment dot matrix scrolling type display hall position indicators at all floors (o) Electric panel as per OEM (p) Lift cabin fan and LED lights as per OEM (q) LED for car position of stainless steel. (r) Car direction indicator in car & landing (s) Battery operated alarm bell & emergency light (rechargeable) along with suitable maintenance free overload warning feature in car cabin (t) Firemen's Switch: One No. Per lift to be installed at Ground floor near landing door (u) Infrared Sensor: Full height standard Infrared door sensor with 154 criss cross beams (v) Built in communication system required handset 2 No: One each in car and near Ground Floor Landing Door (w) Interior of the car: The Interior of the car will be provided with a device that audibly indicates the floor lift car has reached and indicates that car entrance/exit door is open or close. (x) Stops & opening: 02 Stops & 02 Openings

Material and labour for earthing complete with cheimical earthing with copper earth plate electrode 900mmX 600mmX 5 mm thick buried directly in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including copper strip of size 32x6 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Part-I provision of G I Pipe 40mm bore light grade for protection of GI strip and GI watering pipe of 20 mm bore medium grade,GI funnel with wire mesh,including char-coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1, RCC cover 1:2:4 type B1, excavation, earth work in any strata and returning filling, removal of surplus soil and testing for required value, complete all as specified and directed.

Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6mm copper strip including saddles and insulator for fix on wall complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directly in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 25 x 4 mm from earth electrode to test point or up-to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Part-I provision of G I Pipe 40mm bore light grade for protection of GI strip and GI watering pipe of 20 mm bore medium grade,GI funnel with wire mesh,including char-coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1,excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed.

Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25X4mm GI strip inclunding saddles and insulator for fix on wall complete all as specified and directed.

Supply, laying, test and commisioning LT cable XLPE insulated, galvanized steel strip armoured, 1100 volts grade, with stranded aluminium conductor cable 35sqmm 3.5 core, conforming to IS-7098 Part-I with latest amendments up to date including aluminium lugs with proper crimping and steel glands and laid in trenches/ducts/floors/walls/through pipes etc complete all as specified and directed

Cutting of existing PCC hard standing by using mechanical method of any type for laying of cables/GI protection pipe and making good of disturbed surfaces to match with adjoining surface complete all as specified and directed. Note:-PCC for making good shall be measured and paid separately)

Supply and lay 80mm dia Steel tubing GI light grade with fittings for cable protection passing under road /floor or for fixing to poles all as specified and as directed.

Supply and lay 150mm M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc and welding to existing fire pipeline after thorough cleaning of both lines thereafter testing for any pressure leakage complete allas specified and as directed.

Supply and lay 80mm M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc and welding to existing fire pipeline after thorough cleaning of both lines thereafter testing for any pressure leakage complete allas specified and as directed.

Material and labours for cement concrete type C2 1:3:6 using 40mm graded stone aggregate in filling of foundation of poles and mass concrete complete all as specified and directed including necessary formwork

Shifting of existing 80 to 150 mm dia MS Pipe line to nearby location by means of welding, cutting, threading to make connection as per site requirement and testing thereof complete all as specified and directed. Note: Additional pipe line shall be measured and paid separately.

DARSHAN CONSTRUCTION Co. (BID ID -3466625)

Monarch Enterprises (BID ID -3464690)

Veer High Tech Solution (BID ID -3466366)